Log in

View Full Version : First Gen Camaro Subframe - The original OLC Sub


James OLC
03-29-2014, 11:45 AM
Item Location (City/State): Salinas, CA

Price: See Below

Description:

1967 Camaro custom modified front subframe (will fit 1967 - 1969 F-body and Nova). Fully seam welded, converted for coil overs using SpeedTech ATS Chicane kit, SpeedTech high clearance upper and lower control arms, ATS AFX billed spindles with SKF hubs and ARP wheel studs. Custom modified centerlink, 2nd gen outer tie rod ends, custom built steering arms, custom valved RideTech triple adjustable shocks with Hyperco coil springs, Baer 14" rotors, Lee Engineering 670 Steering box, ATS LS engine mounts. Also includes all stainless steel brake lines. First Chicane subframe built by ATS and featured in the 2008 SEMA Show. Subframe was powder coated (titanium) and then sanded and painted.

and

ATS Tri-Y stainless steel headers and 3" Magnaflow exhaust system. Custom modifications to the headers to address low hanging collectors common with these rare pieces. Fit all LS engines including LS7, can include new ls7 header gaskets and bolts. Exhaust system includes Magnaflow true-x crossover and stainless mufflers. Ridicules amount of work done on exhaust (welds ground smooth, etc). Entire system - headers, exhaust, and mufflers - Jet Hot coated (titanium finish).

This is a bolt in and go solution to get your LS project up and running fast immediately.

I have $8500 in parts/labor and countless hours/$s in tuning on the subframe and $4500 in the exhaust - asking $5500 plus shipping (prefer local pickup) for the subframe and complete headers and exhaust - will not separate

Subframe construction pics:

http://www.onelapcamaro.com/build/frontsuspension/1%20ats%20sub%201.jpg
http://www.onelapcamaro.com/build/frontsuspension/2%20ats%20sub%202.jpg
http://www.onelapcamaro.com/build/frontsuspension/3%20ats%20sub%203.jpg
http://www.onelapcamaro.com/build/frontsuspension/6%20ats%20sub%206.jpg
http://www.onelapcamaro.com/build/frontsuspension/7%20ats%20sub%207.jpghttp://www.onelapcamaro.com/build/frontsuspension/8%20ats%20sub%208.jpghttp://www.onelapcamaro.com/build/frontsuspension/9%20ats%20sub%209.jpg
http://www.onelapcamaro.com/build/frontsuspension/10%20ats%20sub%2010.jpg
http://www.onelapcamaro.com/build/frontsuspension/12%20ats%20sub%2012.jpg

James OLC
03-29-2014, 11:50 AM
Current subframe pics (sorry it's not very clean) - not shown is the Lee Engineering steering box and the ATS motor mounts. The second rotor is included but not in the pictures.

http://www.onelapcamaro.com/sale/IMG_2939.jpg
http://www.onelapcamaro.com/sale/IMG_2940.jpg
http://www.onelapcamaro.com/sale/IMG_2941.jpg
http://www.onelapcamaro.com/sale/IMG_2943.jpg
http://www.onelapcamaro.com/sale/IMG_2944.jpg
http://www.onelapcamaro.com/sale/IMG_2948.jpg
http://www.onelapcamaro.com/sale/IMG_2949.jpg
http://www.onelapcamaro.com/sale/IMG_2951.jpg
http://www.onelapcamaro.com/sale/IMG_2952.jpg
http://www.onelapcamaro.com/sale/IMG_2953.jpg
http://www.onelapcamaro.com/sale/IMG_2954.jpg
http://www.onelapcamaro.com/sale/IMG_2955.jpg
http://www.onelapcamaro.com/sale/IMG_2958.jpg
http://www.onelapcamaro.com/sale/IMG_2959.jpg
http://www.onelapcamaro.com/sale/IMG_2971.jpg

James OLC
03-29-2014, 11:51 AM
http://www.onelapcamaro.com/sale/IMG_2971.jpg

Exhaust pictures (also not cleaned up)

sorry - for reasons unexplained I can't find the pics I took of the exhaust - hope you can made due with some header porn…

http://www.onelapcamaro.com/OLC_pics/ls7%20hdrs%204.jpg
http://www.onelapcamaro.com/OLC_pics/headers%20behind%201a.jpg
http://www.onelapcamaro.com/OLC_pics/ls7%20hdrs%203.jpg
http://www.onelapcamaro.com/OLC_pics/ls7%20hdrs%202.jpg
http://www.onelapcamaro.com/OLC_pics/ls7%20hdrs%201.jpg
http://www.onelapcamaro.com/OLC_pics/ls7%20t56%201.jpg
http://www.onelapcamaro.com/OLC_pics/drv%20hdr%201.jpg
http://www.onelapcamaro.com/OLC_pics/drv%20hdr%202.jpg
http://www.onelapcamaro.com/OLC_pics/dt%20in%20sub%203.jpg
http://www.onelapcamaro.com/OLC_pics/dt%20in%20sub%201.jpg
http://www.onelapcamaro.com/OLC_pics/headers%20behind%201a.jpg
http://www.onelapcamaro.com/OLC_pics/headers%20behind%202.jpg
http://www.onelapcamaro.com/OLC_pics/headers%20behind%203.jpg

Obviously the headers are used now and the Jet Hot Coating has lost its luster but there you can see the fit and finish with the subframe as well

hifi875
03-30-2014, 11:00 AM
What a setup!! Those headers are a work of art. Wish I had the $$$. Glws

James OLC
05-07-2014, 09:46 AM
updated the price.

you know you need this...

Sieg
05-07-2014, 11:38 AM
updated the price.

you know you need this...

.........even worse - I want it! :D

Damn True
05-07-2014, 12:48 PM
Dooo eeeeeeeeeet!

califconstruct
05-07-2014, 06:32 PM
nice... very nice!

James OLC
08-10-2014, 08:40 PM
I had negotiated a deal on the package at $5500 with a gent who seems to have disappeared so I've updated the price to reflect that price - this is a great package that will give you a more than capable first gen Camaro or second gen Nova.

James OLC
08-14-2014, 01:30 PM
Sale pending

Jr
08-18-2014, 08:59 PM
James,
Did this sale?

James OLC
08-23-2014, 12:25 PM
Sold