PDA

View Full Version : C5 vette ls1 front accessories


3rdgentug
03-26-2014, 02:36 PM
Im looking for a complete front accessory setup from a ls1 c5 vette.
Let me know what youve got!

Thx

hifi875
03-26-2014, 07:13 PM
Just order from scoggin dickey It's not that expensive. That's what I did. That way you get everything

3rdgentug
03-26-2014, 07:27 PM
I looked on there before , and while they had some serp. belt kits iI never found any for LS Corvettes. Cheapest kit I have found so far was close to 800$ and didnt come with theAC I need or the brackets/lines to make AC work - those cost almost another 600$
Trying to save a few bucks here if I can.

Vince@Meanstreets
03-26-2014, 11:33 PM
Im looking for a complete front accessory setup from a ls1 c5 vette.
Let me know what youve got!

Thx

Let me see what I have left. You need everything right? All pullies, water pump, AC compressor,PS pump and alternator right?

where are you? Might hurt in shipping.

3rdgentug
03-27-2014, 05:37 AM
Yes sir.
I need it all.
I'm in Memphis Tn.
38138

130fe
03-27-2014, 07:12 AM
This is probably the best bang for the buck- http://paceperformance.com/i-6485405-19257325-gmpp-accessory-drive-system-without-a-c-fits-ls2-ls3-ls7-engines.html Add a water pump and crank pulley and you are there. And its all new GM stuff.

3rdgentug
03-27-2014, 08:01 AM
This is probably the best bang for the buck- http://paceperformance.com/i-6485405-19257325-gmpp-accessory-drive-system-without-a-c-fits-ls2-ls3-ls7-engines.html Add a water pump and crank pulley and you are there. And its all new GM stuff.
Thx for that!

hifi875
03-27-2014, 09:08 AM
This is probably the best bang for the buck- http://paceperformance.com/i-6485405-19257325-gmpp-accessory-drive-system-without-a-c-fits-ls2-ls3-ls7-engines.html Add a water pump and crank pulley and you are there. And its all new GM stuff.

it doesn't have a/c. but I ordered the same kit but with air for my car.

3rdgentug
03-27-2014, 10:27 AM
it doesn't have a/c. but I ordered the same kit but with air for my car.

Doing this swap in an s10 pu. I'm ordering the relocation bracket n compressor setup from current performance.