JB64CHEVELLE
03-09-2014, 08:14 PM
Item Location (City/State):Livermore, Ca.
Price:$7,500
Description:1982 Mustang GT that was is family owned since new. It is a H.O. 302, 4 spd, no A/C, the only thing power are the steering and brakes. My uncle ordered it to be lite weight as it is just over 2900 pounds. I have modified the car 10 or so years ago and the put it in storage. I just pulled it out and washed her off and has been on non-op since 2005 so no penalties are due. Mods to the car are:
Complete 1994 Mustang gt suspension with four wheel disk brakes
1994 Mustang 8.8 rear with 3.73 posi
Granatelli rear adj. control arms
Line lock
Maximum motorsport subframe con. still in box
Maximum motorsport caster/camber plates
Motor is factory 302 with Edelbrock performer intake
Demon 650 carb
MSD 6AL box
MSD billet Dist.
BBK equal length shorty headers
BBK off-road H pipe to Flowmaster 2.5" exhaust
ASP pullies
The car has very is very clean inside
The body has only one small dent in the drivers door, the paint is okay
I also have a complete used 1994 Mustang roller 302 fuel injected motor with mods,5spd trans, new flywheel, computer, wire harness, fuel tank and pump. It all goes with the car. I think everything to get the complete 94 drivetrain in it and smogable.
Price:$7,500
Description:1982 Mustang GT that was is family owned since new. It is a H.O. 302, 4 spd, no A/C, the only thing power are the steering and brakes. My uncle ordered it to be lite weight as it is just over 2900 pounds. I have modified the car 10 or so years ago and the put it in storage. I just pulled it out and washed her off and has been on non-op since 2005 so no penalties are due. Mods to the car are:
Complete 1994 Mustang gt suspension with four wheel disk brakes
1994 Mustang 8.8 rear with 3.73 posi
Granatelli rear adj. control arms
Line lock
Maximum motorsport subframe con. still in box
Maximum motorsport caster/camber plates
Motor is factory 302 with Edelbrock performer intake
Demon 650 carb
MSD 6AL box
MSD billet Dist.
BBK equal length shorty headers
BBK off-road H pipe to Flowmaster 2.5" exhaust
ASP pullies
The car has very is very clean inside
The body has only one small dent in the drivers door, the paint is okay
I also have a complete used 1994 Mustang roller 302 fuel injected motor with mods,5spd trans, new flywheel, computer, wire harness, fuel tank and pump. It all goes with the car. I think everything to get the complete 94 drivetrain in it and smogable.