Finch is taking Ford to the dance

[Finch]

I know most everyone knows me to be at home behind the wheel of my 71 Camaro. What most dont know, is that I am a Ford guy from way back, and have owned at least one Mustang every single day since I was 15 when I purchased my first car a 68 Mustang coupe.

I am currently underway on my next project which I hope to use to put Ford back on the Pro-Touring map and kick some butt on the track. I have not locked on the color just yet but thought I would share just a peak of what is coming at you.

Eric Brockmeyer is handling the renderings on this one and has knocked it out of the park on the first try. More to come once we have the color figured out.

What does everyone think? Have I lost my mind??????

[zbugger]

Yes.

[Damn True]

So am I seeing an S197 or am I seeing modern bits grafted on to an old chassis?

[camcojb]

I like it, very aggressive. :thumbsup:

[dunnjun]

No your not crazy... as long as you put an LS in it. ;-)

[Sieg]

No your not crazy... as long as you put an LS in it. ;-)

You beat me too it Karl! :lmao:

[dunnjun]

I should have said as long as you put a Kurt Urban LS in it!

[Flash68]

I'd much rather see you in a 60's/70's Mustang than a late model, Finch.

The last thing I think of when I think pro touring is a late model Mustang.

Hey, you asked, so I opined. :)

[Vince@Meanstreets]

Yes.

I concure but you are in good companies... says the voices in my head.

[71RS/SS396]

You lost your mind long before this project!

[MarkM66]

I'd much rather see you in a 60's/70's Mustang than a late model, Finch.

The last thing I think of when I think pro touring is a late model Mustang.

Hey, you asked, so I opined. :)

Agreed. :trophy-1302:

[BBC71Nova]

I'm sure it will be an awesome ride. Where can late models compete alongside other PT cars? I was thinking that GG, etc limited competition to older cars? Otherwise, someone just go buy a new Z28 and have at it :D . Although I do remember seeing Fox bodied 'Stangs out there so...

[Rick D]

Can't wait to see what direction this goes??. :trophy-1302: new mustang or old looking like a new mustang??? :popcorn2:

[Track Junky]

Seen one in my rear view mirrior a couple of days ago. First thought was,"Man, the front end of that Mustang is pretty sweet looking."
Then the Ford hater standing on my shoulder smacked me on the back of my head :lol:

[tazzz2_ca]

Finch will never let anyone down with advanced thinking and execution in his Pro-touring builds,,, makes me think this is a lot deeper than we might think..... Boys still water runs real deep,,, and Finch is the ocean so hold on to your pants as I'll bet we're in for a Hell of a ride here....

[Finch]

I should have said as long as you put a Kurt Urban LS in it!

Karl, I do not know how to build anything without a Kurt Urban engine, so will see how this goes. Little birdie told me he was refining a positive pressure version of the engine I run in my 71.

[dunnjun]

Oh Yeah!!! After I thought about it for a minute, I realized there was no way that it wouldn't have a Kurt Urban motor in it! :guns: :guns: This is going to be one/the Bad a** Mustang! :bigun2: Can't wait to see this come together. I'm subscribed. :popcorn2: Good luck Brian, and to me, that blue that's on the rendering looks darn good. :cheers:

[Ketzer]

Uhg, a late model? Even an LS can't help that....:underchair:



Jeff-

[67XR7]

Newer or Older, I'd like to see more Fords on the PT scene.

I approve Brian!

[Finch]

Eric started playing with some color and stripe options. Also a little sneak peak at the rear.

[glassman]

Personally, i dont give a crap where its made or who makes it and what year it is. is it fast? does it stop? does it handle? do the seats "grab you"?, does the sound say "drive me hard"?, does it not look like a turd? Thats pro-touring for me.....but its still not a Camaro lol (although i'm a closet Mustang lover).....

[TimeWarpF100]

So am I seeing an S197 or am I seeing modern bits grafted on to an old chassis?

Looks like he is starting with a 2010-14

[TimeWarpF100]

I know most everyone knows me to be at home behind the wheel of my 71 Camaro. What most dont know, is that I am a Ford guy from way back, and have owned at least one Mustang every single day since I was 15 when I purchased my first car a 68 Mustang coupe.

I am currently underway on my next project which I hope to use to put Ford back on the Pro-Touring map and kick some butt on the track. I have not locked on the color just yet but thought I would share just a peak of what is coming at you.

Eric Brockmeyer is handling the renderings on this one and has knocked it out of the park on the first try. More to come once we have the color figured out.

What does everyone think? Have I lost my mind??????

Looks pretty neat but if its getting a LS engine, not so much. BORING!

And how will that help put Ford on the map with a LS?

[Vegas69]

I have to say I agree with the metrosexual thing.

[Finch]

I am just waiting for Ford to see this post and step up with a blown 5.8 for free.:stirthepot:

[Al Moreno]

Nice rendering! Can't wait to see more

[Sieg]

I am just waiting for Ford to see this post and step up with a blown 5.8 for free. :stirthepot:

Sounds like a warranty issue already. :D

[71RS/SS396]

Karl, I do not know how to build anything without a Kurt Urban engine, so will see how this goes. Little birdie told me he was refining a positive pressure version of the engine I run in my 71.

:D :goggles: :confused59:

[Finch]

Should fit under the hood:superhack: maybe I need to build a truck

[Damn True]

Needs a DFY

[71RS/SS396]

Should fit under the hood:superhack: maybe I need to build a truck

There is so much cool in this engine!

[tones2SS]

I'm loving it!!
Looks like a Whipple sitting on top of that block. What size? I'm guessing that engine is good for about 700-800 horse. Torque monster too.
Keep us posted! :thumbsup:

[Finch]

I'm loving it!!
Looks like a Whipple sitting on top of that block. What size? I'm guessing that engine is good for about 700-800 horse. Torque monster too.
Keep us posted! :thumbsup:

4.0 so take those numbers up. This engine also will not fall off after the first lap

[TimeWarpF100]

I am just waiting for Ford to see this post and step up with a blown 5.8 for free.:stirthepot:

Just drop in a Super Cobra Jet Engine, They make around 900HP In stock Trim.

It would take a healthy LS to do that . .

[Bowtieracing]

There is so much cool in this engine!

We need to see more!

And more of the Fords as well!

[GrabberGT]

Should fit under the hood:superhack: maybe I need to build a truck


If the boss 5.0 will fit, I imagine just about anything will fit.

Call me crazy but the thing that jumped out at me first about this motor is the dual throttle bodies allowing a symmetrical intake? Thats going to look slick. The uber hp motors are becoming too common place around here.

[zo6s10]

I know most everyone knows me to be at home behind the wheel of my 71 Camaro. What most dont know, is that I am a Ford guy from way back, and have owned at least one Mustang every single day since I was 15 when I purchased my first car a 68 Mustang coupe.

I am currently underway on my next project which I hope to use to put Ford back on the Pro-Touring map and kick some butt on the track. I have not locked on the color just yet but thought I would share just a peak of what is coming at you.

Eric Brockmeyer is handling the renderings on this one and has knocked it out of the park on the first try. More to come once we have the color figured out.

What does everyone think? Have I lost my mind??????No your not crazy... as long as you put an LS in it. ;-)And a DSE front clip :stirthepot:

[NOPANTS68]

I'm not sure I understand. You're putting a blown lsx into a coyote car to put Ford on the PT map? Are you getting a wrecked V6 car or a body in white to start? I think a stock 2014 GT with a set of tires would beat all but 10% of the PT old iron out there anyway. Would be sad to spend a pile of dough on a car Chevy people don't understand and Ford people hate unless it's just what you wand do out of bordem.

[mexMan]

Beyooteefool... Keep the 5.0, higher compression, intake and exhaust, you know, the whole shebang.

[71RS/SS396]

If the boss 5.0 will fit, I imagine just about anything will fit.

Call me crazy but the thing that jumped out at me first about this motor is the dual throttle bodies allowing a symmetrical intake? Thats going to look slick. The uber hp motors are becoming too common place around here.

The dual throttle bodies is because even a single 102 mm chokes the intake air flow.

[71RS/SS396]

Just drop in a Super Cobra Jet Engine, They make around 900HP In stock Trim.

It would take a healthy LS to do that . .

This engine will make more power than the cobra jet and as Brian eluded to, it won't heat soak after a lap or two.

[TimeWarpF100]

This engine will make more power than the cobra jet and as Brian eluded to, it won't heat soak after a lap or two.

Ho-Hum . . A Chevy in a Mustang

So this LS will make over 1000 Flywheel HP?

[71RS/SS396]

Ho-Hum . . A Chevy in a Mustang

So this LS will make over 1000 Flywheel HP?

Yes it will

[Windsor GTO]

So me putting a 351W in a 2004 GTO am I the only one?:trophy-1302:

[Finch]

So me putting a 351W in a 2004 GTO am I the only one?:trophy-1302:

That would be different. As long as it makes noise and goes fast I am good with it.

[Windsor GTO]

I dont think my work is near the quality work of the great Finch but it will be fun. Car will not handle well with the fat skinny set up but a blast none the less.

[bret]

This might be the year of the Mustang...I'll [re]debut my 69 at the Midwest Musclecar Challenge in early May...then on to Nashville Goodguys...then USCA Daytona on Memorial Day weekend.

Brian...willing to bet dinner at Nashville? I'm really hungry for some good Nashville BBQ :)

[Finch]

This might be the year of the Mustang...I'll [re]debut my 69 at the Midwest Musclecar Challenge in early May...then on to Nashville Goodguys...then USCA Daytona on Memorial Day weekend.

Brian...willing to bet dinner at Nashville? I'm really hungry for some good Nashville BBQ :)

I am in, what are we betting????

[tones2SS]

4.0 so take those numbers up. This engine also will not fall off after the first lap

That is down right awesome Mr. Finch.
Keep us posted.

[Finch]

I will spill the beans soon so just keep an eye on this thread:confused18:

[TimeWarpF100]

I will spill the beans soon so just keep an eye on this thread:confused18:

Any street car with a 1000 HP or more is worth keeping an eye on!

Especially if it can go around corners . . .

Were you just in scottsdale?

[bret]

I am in, what are we betting????

I'm thinking a nice BBQ or steak dinner at your favorite place in Nashville on Saturday night. I would include drinks but that may break both of us :)

[GregWeld]

Mustangs are okay I guess....



Love ya buddy!

[Finch]

I guess it is time to let the ole cat out of the bag on this one. Here is a close version on the final design. Still working on some minor changes both front and rear but you will get the idea. Nothing but an old 67 Mustang with some lipstick and a whole lot of Kurt Urban horsepower

[LS7 Z/28]

This will be awesome Brian, I hope you do a build thread...

[tones2SS]

That is insanely nice! Please do a build thread.
That is going to be a beast.

[Finch]

here is a side view, notice how well the new meshes with the old. The 2011 wheel openings carried to the rear quarters ties it all together.

[70 tt rustang]

Very clean :flag2:

[WSSix]

This is going to be a great car. Good luck with the build and competing, Brian.

[Sieg]

Looks good Brian, definitely has an attitude. Have you settled on a color? Paint or wrap?

[89 RS]

I like what I see, going to be killer. Those Forgelines are my new favorite wheel, they look awesome on your Camaro also.

[Damn True]

So am I seeing an S197 or am I seeing modern bits grafted on to an old chassis?

The latter I see. Cool.

[Ron in SoCal]

Brian the render and concept is awesome. With real world constraints vs drawings, I really hope you can make it jump off the page into a reality.

:cheers:

[TimeWarpF100]

I guess it is time to let the ole cat out of the bag on this one. Here is a close version on the final design. Still working on some minor changes both front and rear but you will get the idea. Nothing but an old 67 Mustang with some lipstick and a whole lot of Kurt Urban horsepower

How does the saying go . . Something about lipstick on a pig? (just kidding)

Looks like a great build!

[tazzz2_ca]

I guess it is time to let the ole cat out of the bag on this one. Here is a close version on the final design. Still working on some minor changes both front and rear but you will get the idea. Nothing but an old 67 Mustang with some lipstick and a whole lot of Kurt Urban horsepower

Another Epic build by Finch,, and you know with that Urban power he'll be a consistent force to deal with at events....

[GregWeld]

Hot rodding ANYTHING is all about what the owner wants to build.... not now - nor has it EVER been about keeping the brand of motor the car was built with. EVER. Get over it. It's why all your Camaro's run Ford 9" rear ends... Who cares. It's about building something with the latest greatest parts and pieces a guy can gather.


The beauty in the whole thing is to watch this man (Finch) drive ANYTHING... because regardless of what it is - if he's behind the wheel - it's going to get top times.

Personally Brian -- I like the grey blue with matt black hood stripe and red pen stripes posted (post #20) in a pic here... it's "different" and fresh.

[Solid LT1]

I think a call to Mike Maier could help you out with your bad acid trip of putting an LS into a Ford ( I'm a diehard Vette guy but my 1st car was a Boss302 Cougar Eliminator when I was 16 it was an $1800 car am I dating myself?) Mikes brother Charlie has lots of contacts in the NASCAR world and could easily get you into the same style of motor Mikey used in his little blue Mustang.

[jarhead]

Very cool! Any updates?