Wanted 621 Bellhousing and randome BBC parts

[Vince@Meanstreets]

Looking to see if anyone has a GM 621 11" clutch bellhousing for M20-21

Also any old BBC flywheels of clutch parts laying around. Im piecing my Camaro together and need random BBC parts.

Old water pumps
Alternator brackets
Power Steering brackets
Engine Bolts
Distributor
Exhaust manifolds
Old Hurst shifter for M21

I have a bunch of stuff to trade or new parts equivalent. Paypal friendly.

[XLexusTech]

I have a GM 621 for you and a hurst shifter pm me and it will send you my number

[Wissing72]

message sent

[Vince@Meanstreets]

pm's sent,

Thanks guys!

[PSV]

Vince I'm considering an ls swap for this car. It would be a perfect donor for what you need.
http://www.lateral-g.net/forums/showthread.php4?t=34897&highlight=1967+camaro

[Vince@Meanstreets]

Vince I'm considering an ls swap for this car. It would be a perfect donor for what you need.
http://www.lateral-g.net/forums/showthread.php4?t=34897&highlight=1967+camaro

Hi Paul,

You have that now? I remember that car. Super clean.

I found a 67 396 a few weeks ago and it just came back from my machine shop. I just need some tin and hardware. I have a Muncie so I just need a bellhousing and parts.

Picked up a real nice complete fold down back seat with hardware and it kinda re kindled the build.

Just curious but what would you sell the drivetrain for?

[PSV]

Hi Vince yeah, I've had the car for a couple years. I love it but it I'm thinking these 6000 ft mountains we have here would do better with an ls. I was thinking you needed everything and thought we might be able to work out a trade of sorts if I could find a way to get the car back to ca. Sounds like you have most of the parts though. I'm glad to hear your putting the 67 together. I've been eyeing it for months since you first posted pics. Took lots of willpower to keep from sending you a pm to buy it.

[Vince@Meanstreets]

Throw a holley FI unit on it and call it a day. Thats a great looking car.

Thats a sweet offer. I'd love to do it but I just dropped a bunch on the 396.

[p51mus]

I have a cool custom oval port tri-power set-up with a custom nitrous sys tem on it. Was orig. on a 69 400 hp 427 vette. I also have the ported heads with titanium valves. It was built by the carb shop in California. I had it on a 510 cu.in big block in my 69 Z-28. I took it off to go to efi. If you are int., what do you have for trades? If not-- thanks for your time. Garry.

[Vince@Meanstreets]

Thanks but thats a bit more than I need. Going for that clean survivor look. Old parts just cleaned up a tad.

If any one has old oil pan bolts or odds and ends let me know.

[Rick D]

Thanks but thats a bit more than I need. Going for that clean survivor look. Old parts just cleaned up a tad.

If any one has old oil pan bolts or odds and ends let me know.

I'll look later, I still have my org oil panel from my 396 and I should have the bolts sitting in a bag in the pan. Just need to get out in the frozen shop to look. Did you find the flywheel? I have one from my 69?

[Vince@Meanstreets]

I'll look later, I still have my org oil panel from my 396 and I should have the bolts sitting in a bag in the pan. Just need to get out in the frozen shop to look. Did you find the flywheel? I have one from my 69?

Hi Rick,
I picked up a pan just need the old bolts and hardware.....Is that flywheel for an 11" clutch?

Im buying a new oil pump, pick up and clutch set.

Need a short water pump but may just buy that new too. They are cheap.