Carb change out

[RBuhr69]

Quick question....I have an Edelbrock currently with power brake booster connects to the back and PCV valve connected to the front off the left side valve cover....I bought a new Quickfuel Black Diamond Q-Series carb but it only has the rear outlet for the power brake booster and didn't notice no front connection when purchasing it...so my question is can I just put a regular breather on The valve cover and leave off the PCV? I have one breather on the right side already....

Thanks.....

[Sieg]

Is there a port on your manifold you can access?

My carb doesn't have any ports so.......
http://photos.smugmug.com/photos/i-vQvWvRC/0/XL/i-vQvWvRC-XL.jpg

I'm not running power brakes so one line is the PCV and the other is a vacuum gauge. I bought that routing hub at Summit, they have single, double and possibly triple port versions.

[Vince@Meanstreets]

you could run two breathers and you'll have to adjust your idle.

[RBuhr69]

I do not remember any port on the manifold, but will check..

Vince, you mean just normal idle adjuster i presume?