Chassisworks subframe/Baer brakes 69 Camaro

[fishface]

Item Location (City/State): Bunker Hill Indiana

Price:4750k firm

Description: New subframe with Baer Trac system for all four corners. 13" 2pc Eradispeed drilled and slotted rotors. Will need bracket for rear brakes which Baer will sell for your app. QA1 coilovers, manual r&p steering. Also billet motor mounts for sbc. This setup bought new from a stalled project. Prefer not to ship. Text me for pics. 765-513-19six5. Thanks, Monty

[rwbbartman]

I'm starting a new 69 project, would like to see some pictures.
Thanks

[fishface]

Hi, pc down at the moment and having difficulty uploading pics from phone. If you can send me a text I will be more than happy to send pics. Thanks, Monty

[cwylie]

Any pics yet?

[fishface]

Price drop on this. Text me for pics.

[fishface]

$4500 cash takes it. This is a new subframe and new 13" Baer brakes for all four corners.

[JohnKellum]

Got part numbers from the chassisworks website?

[fishface]

Had a buyer but fell through so frame is still for sale!!!

[31069ss]

Wish i had the money bump for some good parts

[rpoz20]

Got part numbers from the chassisworks website?

+1

Are you still prefering not to ship?

[Carbo]

Would like to see some photos as well as part numbers.

[Decline]

Is this still available?

[fishface]

Hi, this is still available. Carbo, i emailed the pics to you. Decline, profile said you didnt want emails. Pm me with a phone # and I will text pics. Tried numerous times to resize pics and post to no avail. I will try to get some part numbers up later today. From my understanding the bare frame is the same and available with different options. In talking with Carl from Chasissworks this is an older but unused setup. Hopefully he will see this post and weigh in. Thanks

[Twinstang]

Sounds like a good deal try and get some pics up and I bet you would have no problem selling it for that price especially with the brakes

Good luck with the sale

[Carbo]

Hi, this is still available. Carbo, i emailed the pics to you. Decline, profile said you didnt want emails. Pm me with a phone # and I will text pics. Tried numerous times to resize pics and post to no avail. I will try to get some part numbers up later today. From my understanding the bare frame is the same and available with different options. In talking with Carl from Chasissworks this is an older but unused setup. Hopefully he will see this post and weigh in. Thanks

Got the photos. Thanks for sending them. We spoke before but correct me if I'm wrong but I think you said that the spindles are for drag race and that the unisteer is manual?

[fishface]

Got the photos. Thanks for sending them. We spoke before but correct me if I'm wrong but I think you said that the spindles are for drag race and that the unisteer is manual?

Yes, that is correct. It has the fabricated drag race spindles and manual rack. In comparing it to the Chasissworks site, it seems to be the 7701-4 system which lists for $4995. I believe this is before brakes are added. Spindles and steering rack can be changed if desired.

[Carbo]

Yes, that is correct. It has the fabricated drag race spindles and manual rack. In comparing it to the Chasissworks site, it seems to be the 7701-4 system which lists for $4995. I believe this is before brakes are added. Spindles and steering rack can be changed if desired.

Thanks Monty. Let me look into this a little more.

[cjfirstgen]

If it helps I have the 3/4" sway bar and manual clutch horn for this subframe that I removed from mine. I only post this since it looks like the sway bar is not included in that kit. Hope that is helpful to the OP sale.

http://www.cachassisworks.com/Attachments/DataSheets/6178_DS_WEB.pdf

[fishface]

I still have this frame for sale. I will ship it if necessary. The firm price is $4000 plus shipping if I build a pallet and ship or $3800 if you are within driving range and can pick it up. Pretty good description throughout post. Feel free to pm or text (better) for pics. Thanks guys!!

[Nativefx]

Where are you located?

Sorry, just re-read your first post and got my answer. I'd like to see some pics if possible, if you could PM me your email address I will contact you? I'd also like more information about the actual set up, I'm not clear about the difference with "drag spindles"? Can the brake system be utilized on other spindles that can be sources from Chassisworks?