QA1 Control Arms?

[V8TV]

Anyone have any experience with QA1 control arms? Namely the tubular GM parts? It seems they bought the Edelbrock suspension line and now sell these. We have a customer wondering about build quality, fit, country of origin, etc.

http://www.qa1.net/qa1_motorsports/media/catalog/product/cache/1/image/265x265/9df78eab33525d08d6e5fb8d27136e95/g/m/gm-abody-ca-race-group.png

Thanks!

[V8TV]

Going to answer my own question here -

I called QA1, learned that the street version is a stock ball joint with polyurethane bushings, and the race version is a delrin bushing with their low-friction ball joint. Both versions retain same geometry.

All the arms come with coil-over mounts installed, with an optional stock coil spring mount available for around $69 retail.

These are all made in Minnesota.

So there I have it!

[Rod P]

made in Minnesota :confused59: the hot bed of suspension :lostmarbles:

[V8TV]

made in Minnesota :confused59: the hot bed of suspension :lostmarbles:

MN is USA, that's what I wanted to know.

[Bryce]

just throwing this out there.....

To be considered made in USA more than 50% of the cost needs to be American. SO that could mean some components are from overseas and assembled here.....