71' L-88 Corvette Replica (kinda)

[vstol]

Its been a while since I have posted a build but instead of posting all the build pics, I have posted my build site below and then will post new pictures as I go. Update on the engine is I plan to use BluePrint Engines LS 427 FI 620hp. Not quit there yet but hope to have this on the road by the end of summer. Thanks

http://forums.corvetteforum.com/c3-tech-performance/2760415-71-l-88-replica-kinda.html

[coolwelder62]

I've seen this build thread.Awesome build coming along.Would luv to build a C3 for my self.

[vstol]

getting there, need a few brackets for the fuel cell and some cross bracing for the roll bar

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3133.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3133.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3132.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3132.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3131.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3131.jpg.html)

[coolwelder62]

Lookin good.:thumbsup: :thumbsup: I missed it in the other thread.Who builds the chassis.

[vstol]

It was Jeff Leech at Mid America Industries

[vstol]

I finished the roll bar and bracket for the fuel cell. Just waiting on a side mount bracket for the optima battery and then tear it down and get it to the powder coater's

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3134.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3134.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3136.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3136.jpg.html)

[coolwelder62]

I wish the folks over here could see the corvette you started with. What an amazing nice car.Very cool project!!!!!! :thumbsup: :thumbsup:

[vstol]

Thanks and all they need to do is to hit the link on the first post. It's a PITA do reload all the pics

[vstol]

I have decided to go with BluePrint Engines LS3 427FI. I am still a few months away but hope to have the entire car completed this summer. More pics after this weekend

[vstol]

Ready to go to the powder coaters next week if I do not have to notch my front cross member to clear the balancer.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3144.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3144.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3143.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3143.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3142.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3142.jpg.html)

[coolwelder62]

Those flare's cool.!!!!!!!!!!Can't wait to see it after powder coating.

[WSSix]

Really cool build. Love the c2/3 cars and I really like seeing them modified. Good luck!

[FLYNAVY53]

Love the build! I just read through your post over on CF....about the reaction I was expecting from those guys. I just purchased a pretty mint '69 small block for a similar but less radical project....LS motor, Lemans/Trans Am "influenced" but without the full chasis/cage/flares/etc. I too am of the theory to start a project with the best car you can afford, and you'll save money in the long run....some of the Vette guys just dont get that. Im looking forward to your progress!

[vstol]

Looking fwd to your build as well.

[vstol]

I am slowly moving fwd with the frame being powder coated, suspension apart and ready to be cleaned and clear coated. I will order new bushings and ball joints this week

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3462.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3462.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3463.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3463.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3464.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3464.jpg.html)

[coolwelder62]

Look's outstanding!!!!

[vstol]

Hope to have the suspension cleaned and clear coated this weekend . I did finally get my Dana 44 and it has 3:92 rear and mated with the LS3/427 it will haul the mail. Hope to order the motor in 2 weeks

[coolwelder62]

Will you be ordering a Blueprint 427.

[vstol]

Will you be ordering a Blueprint 427.

I plan on buying their LS3/427FI motor this month

[vstol]

All the suspension is cleaned and ready to be cleaned with aluminum cleaner then etched before I clear coat it

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3392.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3392.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3393.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3393.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3394.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3394.jpg.html)

[vstol]

All the suspension is cleaned and ready to be cleaned with aluminum cleaner then etched before I clear coat it

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3392.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3392.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3393.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3393.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3394.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3394.jpg.html)

[vstol]

The front suspension is complete still waiting on the yokes from Mid America Industries. He said it will be weds



http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3467.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3467.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3468.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3468.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3469.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3469.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3470-1.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3470-1.jpg.html)

[vstol]

Finally I ordered my LS3/427 FI from BluePrint Engines. It should be here in late May, 620 hp and 568lbs of torque.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/PSLS4272CTF.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/PSLS4272CTF.jpg.html)

[WSSix]

Suspension looks great. Those aluminum C4 pieces really clean up well.

[coolwelder62]

Lookin good.

[vstol]

Thanks getting there slowly

[vstol]

I can not stop smiling my Blueprint LS3/427Fi was delivered today and it looks great. It dyno'd at 618hp at 6200 and 574 lbs torq at 4400 rpm. At 2800 rpm it has 500lbs of torq. I also ordered my TKO600 5 spd from American Power train from the flywheel back so I am slowly moving fwd. Andrew at Blueprint was great to work with. I almost have the rear suspension together with fuel cell next. Bill at American Power train was very good as well.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3477.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3477.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3478.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3478.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3479.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3479.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3480.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3480.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3481.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3481.jpg.html)

[groovyjay]

That car is going to be an animal! Can't wait to see more updates. :headspin:

[vstol]

thanks

[vstol]

Here is the dyno sheet for my BluePrint LS3/427FI. I have been getting the body ready for primer after I seal the doors,T-tops and fire wall.

[vstol]

After two weeks of "honey do's" I had a few minutes this weekend to start things moving again. I mounted my Blue Print LS3 427 onto the frame, smoothed the firewall, closed in the air inlet holes on the bottom of the front valance and fitted the rear exhaust panel. I plan on shooting gel coat (Duretec) on the doors, firewall and T-tops this weekend and have it in primer ready for paint the first week of August. I'm slowly moving fwd

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3493.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3493.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3494.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3494.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3491.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3491.jpg.html)

[vstol]

After two weeks of "honey do's" I had a few minutes this weekend to start things moving again. I mounted my Blue Print LS3 427 onto the frame, smoothed the firewall, closed in the air inlet holes on the bottom of the front valance and fitted the rear exhaust panel. I plan on shooting gel coat (Duretec) on the doors, firewall and T-tops this weekend and have it in primer ready for paint the first week of August. I'm slowly moving fwd

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3491.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3491.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3493.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3493.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/DSCN3494.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/DSCN3494.jpg.html)

[Neil B]

I am loving this build!

[vstol]

I am loving this build!

Thanks I just sprayed the gel coat (Duretec) on the doors, firewall and T-tops and that stuff is very nice to work with

[jydracing]

Nice vette build!!! I had a 69 in college....Your build is looking very "NICE"!!!
Keep at it :))))

[vstol]

thanks

[vstol]

Its been a while but the car is in final gel coat and should be in primer next weekend. All the body work is complete. The transmission should be on its way, American Powertrain is behind. I also thought I would share my security signs I have around the property, visitors should get the message.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3413.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3413.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3406.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3406.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3407.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3407.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3408.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3408.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3412.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3412.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3414.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3414.jpg.html)

[vstol]

After a few delays I installed my TKO 600 from American Powertrain. I want add that their customer service is first rate. On Friday I noticed I had the wrong flywheel bolts so I called and they overnighted the correct bolts. On Sunday, I called their hot line to ask a question about the hydraulic throw-out bearing and their rep actually stepped out of church to answer my call, now that is special. I also ordered a box of 1 7/8" pipe along with 3 1/2 to begin to build my headers. I will use Ed's flanges with starter tubes and go from there. I'm looking into building something very similar to the header that is attached. Thanks

http://www.corvetteforum.com/forums/c3-tech-performance/2760415-71-l-88-replica-kinda.html

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3420.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3420.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3421.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3421.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3422.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3422.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3424.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3424.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3419.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3419.jpg.html)

http://www.corvetteforum.com/forums/attachment.php?attachmentid=47823496&stc=1&d=1409528041

[Ron in SoCal]

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3413.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3413.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3406.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3406.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3407.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3407.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3408.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3408.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3412.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3412.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_3414.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_3414.jpg.html)

I LOVE this project Vstol :thumbsup:

[vstol]

thanks

[waynieZ]

Awesome project, oh and I love the sign!

[vstol]

The sign is very true :)

[coolwelder62]

What an Awesome project.

[Rick D]

Wow not sure how I missed this one but very cool project!! This should be a beast when it's finished.

[vstol]

Thanks, I'm moving slow but late spring I should be good to go

[vstol]

Car is ready for primer, TKO 600 trans is finally mounted to the BluePrint Engines LS3 427 and I'm ready to build the headers. Moving fwd and not in a circle.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0811.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0811.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0812.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0812.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0813.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0813.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0815.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0815.jpg.html)

[tubbed69]

This is a very nice build,like that frame and the sign:thumbsup:

[coolwelder62]

Wow,The corvette's lookin awesome. Love the wheel Flare's.

[vstol]

Thanks

[vstol]

I got the car in primer this weekend

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0833.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0833.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0832.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0832.jpg.html)

[aany001]

Wow nice job!! really like these!!!

[vstol]

thanks

[JohnC]

Did I miss somewhere what color it is going to be?

Looks great.

John

[vstol]

Did I miss somewhere what color it is going to be?

Looks great.

John

Great question the only thing I know is it will incorporate the Owens Corning stripe down the middle. I'm all over the page after that from black with silver stripe to grey and silver, orange and black or like the Blackwell corvette orange with yellow. I have some time

[vstol]

One header done and starting to build the FIA lights

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0838.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0838.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0839.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0839.jpg.html)

[GregWeld]

Love this! I love Corvettes (well.... nothing much after about 1967 - LOL) and this is just turning out so kool!


My older brother is a Marine -- He loved the "warning" sign! As do I!



I've always loved the one that discusses not firing a warning shot... Ammo is expensive... LOL

[XLexusTech]

Looks good ... Heads up bolt up a starter you may have some clearancing to do on that bell housing. :relax:

[vstol]

Looks good ... Heads up bolt up a starter you may have some clearancing to do on that bell housing. :relax:

Thanks I will have the starter on before building the PS headers, I'm just not sure which starter I will go with

[XLexusTech]

Thanks I will have the starter on before building the PS headers, I'm just not sure which starter I will go with

I mean the starter to bellhousing the QuickTime needs a lot of grinding to fit all the starters I tried... Kinda pissed me off since they claim that they are designed for OEM starters

[vstol]

I mean the starter to bellhousing the QuickTime needs a lot of grinding to fit all the starters I tried... Kinda pissed me off since they claim that they are designed for OEM starters

what starter did you find that worked the best

[XLexusTech]

what starter did you find that worked the best

ACDelco 12617229 GM Original Equipment Starter Motor

[vstol]

ACDelco 12617229 GM Original Equipment Starter Motor

on its way thanks

[taxidermy man]

Love this project, what wheels and tires are you going to run?

[zz430droptop67rs]

I'm really liking that car.

I even joined the other forum so I could start from day 1. :thumbsup:

[vstol]

Love this project, what wheels and tires are you going to run?

Mini light replicas from Team III wheels, 18 x 10 and 18 x 12, leaning twds KDW tires. just cannot afford Forgeline wheels

[vstol]

ACDelco 12617229 GM Original Equipment Starter Motor

I got the starter plus ARP bolts from Summit 430-3508, 1 long one short. Not sure where they came up with a short one I need two long bolts and the bolts knurling interferes with the last hole in the starter. Did you have the same issue? thanks

[chichirone]

Great build. Chassis looks stout. Love the flares and the direction of this project.

[vstol]

Headers are ready to be finished

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0845.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0845.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0846.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0846.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0852.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0852.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_0854.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_0854.jpg.html)

[vstol]

Finished ACP Stahl headers

[WSSix]

Looks good. Did you braze the pipes to the flange on the outside?

[vstol]

Yes they did and welded the inside

[vstol]

The build should pick up after Christmas. Here is the FIA light set up I got from Jim at Classic Aircraft and Auto Inc. Merry Christmas

[vstol]

No pictures just taking advantage of the warmer wx and sanded the body primer with 220. Body looks very straight, so 320 then 400 and it looks like the painter would like me to go to 600 as well.

[mach1stang]

I gotta make sure wifey doesn't see this! She LOVES this body style vette and I'll never hear the end of how bad she wants to build one!

[vstol]

Thanks as we all know with these projects its just time and money

[vstol]

Winter is slowing me down but the fuel system is plumbed for now and I will get the brakes lines set up today so the body will go on next week then paint right after



http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/F1.png (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/F1.png.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/F2.png (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/F2.png.html)

[vstol]

Well I decided to paint the car the 2015 Corvette Daytona Sunset Orange metallic with a black Owens Corning Stripe. Here is a pic of the color. Finally dropped the frame off the jacks today and the body will be on in two weeks and off to the paint shop early April.

[FLYNAVY53]

good choice....I think that will look really slick! Did you happen to catch the recent episode on Velocity Channel about the Owens Corning cars?

[vstol]

No I did not see the show, I will look for it.

[WSSix]

x2 that color is going to look good with the flowing lines of the c3 body. Good choice!

[vstol]

Thanks, looking fwd to getting this car done

[vstol]

Finally the body is on the car as well as the Holley Accessory drive.
I had to cut the tunnel up pretty good but that is an easy fix. Its nice to get the car back down and onto the frame.


http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/005.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/005.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/003.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/003.jpg.html)

[vstol]

My work is done now its time to turn it over to the pro to finish and paint the car, it goes to the paint shop tomorrow. I have laid out how the stripe will go so we will see. I also had to cut the tunnel up so the drive shaft cleared.

[Neil B]

Looking good! That will definitely be a unique color on a C3. Just curious, what color are you going with for the wheel centers and side pipes?

[vstol]

Looking good! That will definitely be a unique color on a C3. Just curious, what color are you going with for the wheel centers and side pipes?

I think black side pipes/headers is the way too go your thought? As for wheels I was going with Team III LT models which do not come in black. I looked a CCW Classics in black but the $$$ is pretty steep. Once the car is painted I will seek help from company's for brakes/calibers and wheels etc.
Kevin

[Neil B]

I think black side pipes/headers is the way too go your thought? As for wheels I was going with Team III LT models which do not come in black. I looked a CCW Classics in black but the $$$ is pretty steep. Once the car is painted I will seek help from company's for brakes/calibers and wheels etc.
Kevin

The C6 Z07 looks good in that color with black wheels. Might just be one of those wait-and-see things after the car is painted. Gotta be careful with too much orange and black so it doesn't look too 'Halloweeny'.

http://fastestlaps.com/photos/chevrolet_corvette_z06_carbon.jpg

[vstol]

Here are the wheels that are currently my first choice.

[Neil B]

Here are the wheels that are currently my first choice.

Yup! :thumbsup:

[NAPA 68]

Here are the wheels that are currently my first choice.

Minilite's nail a 3rd gen Corvette IMO

[vstol]

Agree

[FLYNAVY53]

Vstol.....love the progress! Im actually just starting a similar, yet less aggressive build on my '69 and also plan on running the ET wheels LTIIIs. Mine's Fathom green so I went with the ceramic coated side pipes but I think Your car will look really sharp in the orange with black pipes.

Are you planning on a stripe of any sort or just straight orange? As was stated above, I think some guys go a little far with the orange/black theme but I think orange with a flat black stripe on the L88 hood and black side pipes would look good with either the ET wheels, or CCW classics with a polished lip and black anodized or painted centers (see below). Keep up the good work!!!

Flat black stripe with black side pipes:
http://image.hotrod.com/f/68039580+w660+h495+q80+re0+cr1+ar0+st0/1971-chevy-corvette-front-three-quarter.jpg

CCWs - polished lip with black anodized centers
http://images1.snapfish.com/232323232%7Ffp%3B32%3Enu%3D323%3A%3E7%3A%3B%3E%3B4 5%3EWSNRCG%3D349286656733%3Anu0mrj

[vstol]

Thanks the stripe will be gloss black but will be like the Owens corning stripe. I have it roughed out for the painter

http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/002.jpg?1428865719883&1428865721046


http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/001.jpg?1428865758366&1428865759035

[FLYNAVY53]

thats right, I completely forgot that you posted that earlier....cant wait to see it....any estimate on when the paint will be done?

[WSSix]

I would look to a gun metal color or even a dark bronze instead of black for the wheels. I think black wheels, even with a machined or polished lip, will be too much black and give you that Halloween effect. Getting a third color that's only on the rims into the mix is what I would do. I'd only put paint on the centers, too. Just my opinion. Glad the car's off to paint now. Hope you get it back quickly.

[vstol]

Thanks the wheels will be like these from Team III if I can get the backspacing I need

[vstol]

Should have color on it next week

[vstol]

got some color

[WSSix]

Very nice. Glad to see the body shop moving along instead of just sitting in jail.

[vstol]

It will sit in jail one extra week but it looks good

[vstol]

more pics

[vstol]

a few more

[WSSix]

That looks great! I can't wait to see this outside and complete.

[vstol]

just need to sand and polish

[Sonar Chief]

WOW ... that's gorgeous!!!! Great job :trophy-1302:

[Justin@EntropyRad]

The color is perfect, please run those mini lite wheels on it too!

[vstol]

The color is perfect, please run those mini lite wheels on it too!

Wilco and pm sent

[Flash68]

That looks great. What a fresh look.

[Sieg]

Can't wait to see it in the sun, that paint is going to pop!

Nicely done. :thumbsup:

[vstol]

Can't wait to see it in the sun, that paint is going to pop!

Nicely done. :thumbsup:

I saw it yesterday in the sun and the metallic really comes out. It was not sanded and buffed and my reflection in the paint was great.

[vstol]

finally got it home here are a few more pics. Working on the door latches then engine harness..dash..wiring
http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/014.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/014.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/015.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/015.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/016.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/016.jpg.html)

[WSSix]

Ohhhhhhhh, shiiiiny!

[vstol]

shinny and no chips until its first road trip

[vstol]

Have not been idle but slow. I have started on the dash, I have the engine harness wired, I am waiting for a Stainless Steel fuel line to arrive which will go under the car, I am almost done with the trans tunnel so it will be time to wire. I am going with American auto wires 22 circuit kit and another decision is I plan on using Kore3 C6 Z51 caliber and rotors for the front vice the C4. I got my headers and side pipes back from Jet hot and they came out great.

[WSSix]

Side pipes look great! I want to coat my headers in the same color. Is it satin black?

One suggestion, sit in the car before finalizing the dash if you haven't already done so. I'm worried about how far down the dash comes so far back from the firewall. It looks like it would be close to your legs as you move them about to press the clutch and brakes. Could be me though. Even though I'm 6' tall, I sit rather close to the steering wheel when driving. Keep up the good work.

[vstol]

Thanks and thats the plan I think I can come up about two inches

[vstol]

Side pipes look great! I want to coat my headers in the same color. Is it satin black?

One suggestion, sit in the car before finalizing the dash if you haven't already done so. I'm worried about how far down the dash comes so far back from the firewall. It looks like it would be close to your legs as you move them about to press the clutch and brakes. Could be me though. Even though I'm 6' tall, I sit rather close to the steering wheel when driving. Keep up the good work.

Sorry they are satin black

[Flash68]

Love the dash setup!

[vstol]

thanks

[WSSix]

Thanks! I'm definitely going satin black then with my headers, too.

[PonchoJohn]

finally got it home here are a few more pics. Working on the door latches then engine harness..dash..wiring
http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/014.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/014.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/015.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/015.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/016.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/016.jpg.html)
This paint scheme reminds me of my old Tyco H.O. slot cars from the 70's/80's. :)

[vstol]

This paint scheme reminds me of my old Tyco H.O. slot cars from the 70's/80's. :)

I certainly remember that

[vstol]

Started wiring it up, got the Vintage air in and condenser and decided to use the stock fuel filler lid vice the lemans one. The FIA lenses are set up so we are still moving fwd. Please ignore the dust

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/148.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/148.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/149.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/149.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/152.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/152.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/153.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/153.jpg.html)

[vstol]

All wired up except the gauges which I will complete this weekend. I an going with Dewitts LS dual fan radiator so we are getting there. It will be on the road this spring.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/2015-09-06%20038.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/2015-09-06%20038.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/2015-09-06%20038.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/2015-09-06%20038.jpg.html)

[Neil B]

Looking awesome. I just noticed the painted bumper. I'm curious to see what you do for the grill opening area. Any hints on wheels?

[vstol]

Thanks Neil, I was thinking of a mesh grille like the RideTeck corvette but I think I will stay with the 71 grille's. I saw your CCW's for your car and they look great just a few more dollars than I want to spend. Going into this project I have stuck with Team Three wheels (LT's), 18 x 10 and 18 x 12's with 275 front and 335 in the rear. Here is a pic of the wheels

[vstol]

However I am open to some suggestions for the front grille opening.

I would like to thanks again Stahl Headers (Greg Stump [email protected]) Jim at Classic Air and auto for the FIA set up (http://www.classicaircraftautoinc.com/) Blue Print Engines and Jeff Leech at Mid America Industries (309 787 5119). Its been a long haul but the beast will be on the road soon.

[Neil B]

Thanks Neil, I was thinking of a mesh grille like the RideTeck corvette but I think I will stay with the 71 grille's. I saw your CCW's for your car and they look great just a few more dollars than I want to spend. Going into this project I have stuck with Team Three wheels (LT's), 18 x 10 and 18 x 12's with 275 front and 335 in the rear. Here is a pic of the wheels

The Team III's were on my short list as well. Great looking wheel. I have Minilite's on my Camaro too.

[vstol]

Any good ideas other than the stock grilles

[Neil B]

Any good ideas other than the stock grilles

I am probably going to make a custom aluminum surround with a mesh insert.

[vstol]

I am probably going to make a custom aluminum surround with a mesh insert.

That is my other option and have it all blacked out which I will do if I use the stock grille's

[vstol]

Pictures of "other than stock" grilles on a 68-72 are welcome

[vstol]

Dash almost done, roll bar in, ordered my Team III LT 18 x 10 and 18 x 12 plus BFG Rival S 275's and 335' so moving fwd.

http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_4322.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_4322.jpg.html)
http://i152.photobucket.com/albums/s173/vstol/L-88%20Replica/IMG_4323.jpg (http://s152.photobucket.com/user/vstol/media/L-88%20Replica/IMG_4323.jpg.html)

[vstol]

First start and wheels.

http://s152.photobucket.com/user/vstol/media/Mobile%20Uploads/1st%20start.mp4.html?o=0

http://s152.photobucket.com/user/vstol/media/Mobile%20Uploads/IMG_4524.jpg.html?o=2

http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/IMG_4523.jpg?1463701793263&1463701794119&1463701795670&1463701798050&1463701799539

[WSSix]

Congrats! The dash came out looking great, too.

[vstol]

Thanks I actually had it buttoned up only to find out the ECU from Vintage Air was bad as well as the sending unit on my Fuel Safe Fuel cell. Vintage air was great in trouble shooting it with me and when it was identified it was the ECU I got a new one in two days!!!! On the other hand after we trouble shot the system (their support was very good as well) I shared fuel safe my build site to show them there has only been fuel in the system for 2 weeks and they said the warranty ran out tuff. They did take a few bucs off when I purchased anther one, lesson learned.

[vstol]

Ok I am out of hibernation from building a large addition to our home so all I have to do is the interior, front grills and working brakes. This is the first time the car has moved under its own power and with these wheels and tires.

[vstol]

sorry having trouble posting my pictures

[vstol]

http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/IMG_5497.jpg (http://s152.photobucket.com/user/vstol/media/Mobile%20Uploads/IMG_5497.jpg.html)

http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/IMG_5500.jpg (http://s152.photobucket.com/user/vstol/media/Mobile%20Uploads/IMG_5500.jpg.html)

[vstol]

http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/IMG_5499.jpg (http://s152.photobucket.com/user/vstol/media/Mobile%20Uploads/IMG_5499.jpg.html)

[vstol]

http://i152.photobucket.com/albums/s173/vstol/Mobile%20Uploads/IMG_5498.jpg (http://s152.photobucket.com/user/vstol/media/Mobile%20Uploads/IMG_5498.jpg.html)

[WSSix]

Gorgeous!

[vstol]

thanks

[1965_SS]

So bad ass!!!!!!!!:rockin::beavis:
Great job!

[groovyjay]

Stellar!

[vstol]

Few more pics, just got appraised and waiting on the insurance.

Well pics are not loading will try later

[vstol]

45 miles on it and it is wicked quick. No issues and I am switching to a power brake setup, the Wilwood I have just is not doing it. I will go with 15/16ths power boosted.

[WSSix]

Great to hear that. I'm glad you've be able to put a few miles on the car.

[vstol]

I am going with Hydratech set up, the vacuum booster does not fit.

[Haulin-A]

Car looks badass, really digging that wheel setup

[vstol]

Just received my HydraTech set up hope to have it done this weekend.

[Hydratech®]

:ttiwop:

I wanna see, I wanna see! C'mon now! LOL

[vstol]

:ttiwop:

I wanna see, I wanna see! C'mon now! LOL
This site is a PITA for loading pictures they say they are too large.

[Hydratech®]

Take smaller pictures! :lol:

Resizing images *IS* a PITA...

[egoman]

Post your pics to facebook and they are automatically resized.

[gofastwclass]

This site is a PITA for loading pictures they say they are too large.

There is a free application i have used called irfanview that will resize the images to any size you like. It will even do batch resize and renames if you so desire. Did I mention it's FREE? :D

[vstol]

Thanks I am putting in my Hydratech power brake system tomorrow

[vstol]

I will test the waters in the coming week putting the car up for sale. As mentioned with the Ride Tech 48hr Corvette selling last month for $127,800 it might be a good time to test the market. Cheers

[Zspoiler]

What very nice work.I`ll be interested to see the finished product.

[vstol]

Here we go

[vstol]

Better pics on my photo site

http://s152.photobucket.com/user/vstol/library/L-88%20Replica?sort=2&page=1

[vstol]

Here is the DYNO it is a beast! :)

[WSSix]

Nice numbers! Good luck with the sale if you do decide to sell it. Do you know what you want to build next?

[vstol]

I will put it up for sale in the next two weeks, but no hurry. Next build no idea but it will most likely be my last.

[fleetus macmullitz]

Great looking Vette with a great deal of nasty thrown in! :cool:

[vstol]

Thanks

[shelteredV]

Wow, great job. Car looks sweet.

[vstol]

Thanks

[vstol]

Just put the car for sale on this forum as well as Corvette Forum. Testing the market
Thanks

[vstol]

Spring day so off I went for a 40 mile drive. It was the first time I sat in traffic but the water temp stayed steady at 210 degrees and oil temp never went past 170 degrees and that was when I was idling for about 5 minutes then stopped and go for several miles in town. Otherwise the oil temp stayed at 140 degrees. I just laugh when I hear there are cars with 700 plus HP. With 618hp and all this torque in a 3200 lb car it is a beast. Trying to see if the local airport will give us sometime for some high speed runs. Trying to get a video up on line, I need my daughters help.

[WSSix]

Glad the drive went well and the engine stayed cooled. I don't bother to build to more than 500hp any more simply due to what you're experiencing. On a street car, it's more fun for me to keep the power reasonable.

[vstol]

Glad the drive went well and the engine stayed cooled. I don't bother to build to more than 500hp any more simply due to what you're experiencing. On a street car, it's more fun for me to keep the power reasonable.

knowing you have it is also fun, thanks

[vstol]

Trying to post some video's of the car. This is a little after start up;
https://youtu.be/PYbsLOpOM_w

[vstol]

great day for a drive

[vstol]

After 500 miles with the Corbeau retractable harness I will pull it for a 5 point harness. Just never seemed to work the way I thought it should and with this car the 5 point is a much better solution and I still can reach all the switches. Pics soon, just ordered the harness.

[vstol]

It has been a while but I have been focused elsewhere as my Son LtCol Kevin Herrmann was killed on 6 Dec in the C-130 F-18 Mishap over the sea of Japan. Anyhow it was 10 degrees here on Monday and the car had been sitting for three weeks so I needed to get it moving. Of course it started right up, thank God for fuel injection. Just drove around the block a few times with the top speed of 30mph as the tires should not be out in this cold :). It was good to get in it and the heater worked just fine.

[fleetus macmullitz]

Kevin,

I am so sorry to hear about your son Kevin’s passing...

My deepest condolences to you and your family.

[vstol]

Kevin,

I am so sorry to hear about your son Kevin’s passing...

My deepest condolences to you and your family.


Thank you

[JohnC]

I'm very sorry for your loss.

[Chiva]

I am very sorry about the loss of your son. I appreciate the job our military does to keep us free. Again, so sorry.

Rob

[vstol]

My car is on its way to Barrett Jackson in Connecticut in June, just thought I would share. I had sold it a few months back knowing it was going there.
https://www.youtube.com/watch?v=YdyPRYE4jg4

[WSSix]

Cool! Will be interesting to see where it ends up. Thanks for letting us know.