Totally Rust Free 69 Camaro

[coolwelder62]

Item Location (City/State):Baldwin city Ks.

Price:12.5K as is16.5K Body assembled.

Description:Unassenbled 1969 dynacorn Camaro coupe.I have everything part needed to build a brand new 69 Camaro from scratch.From the frt bumper to the rear bumper.Also have alum frt fenders,header and lower valance panels.alum frt & rear bumpers,complete grill kit,head light bezels,all window trim,inner door 1/4 parts,fiberglass & steel & inner fenders,tail lens and housings,american auto wire harness,ride tech 4-link,used 9in housing,stock sub frame,DSE body bushing w/stainless,DSE mini tubs,Feesler billet alum hood catch,DSE stainless hood pin & stainless catch ring,complete body asemm hardware kit,.Clear/clean Ks title & Vin#.used rear window and 1/4 glass,Only Parts still needed are new glass, weather strip, steel or alum hood,hood hinges.Also come's w/Body assembly jig and alinement fixture's.If I cant sell it as a complete package I will keep and build after I sell my 66 Chevelle.I have all the parts stored in an trailer behind the shop,SO only ask for photos if you dead set on a project like this.Thank's Scott

[coolwelder62]

Ok,I've had some PM's asking to sell only some part's.If I price the part's it will be at full retail plus my shipping cost.o I can replace them. I only want to sell the complete project. Selling only half the part's will only cost me lot's of money.IF I DONT SELL THE COMPLETE PROJECT I WILL KEEP IT AND FINISH IT AT LATER DATE!!!!!!!.

[tubbed69]

Scott I wish you were a lot closer,sure sounds like a great deal for someone.GLWS.

[coolwelder62]

Scott I wish you were a lot closer,sure sounds like a great deal for someone.GLWS.I think I priced it right.If some one were to buy all the part's and pcs. & pay for shipping it run them around 18K.With no labor to put it togather yet.

[GMTILT]

if i were you i would pull it out of the container and post up some pics, its a good deal you have and it would cost much more to buy an orignal body and reskin it with all the work you would be up over 18k in a hurry, get some nice pics on here and you will probably sell it , in this case ,,,,pics are worth 18k ! :)

just my .02 is all

[coolwelder62]

if i were you i would pull it out of the container and post up some pics, its a good deal you have and it would cost much more to buy an orignal body and reskin it with all the work you would be up over 18k in a hurry, get some nice pics on here and you will probably sell it , in this case ,,,,pics are worth 18k ! :)

just my .02 is all:badidea: It's 6 degree's outside and just snowed 4inch's.It will probably take about 8 hours to unload everything.Maybe I'll wait until April then I will unpack it.

[GMTILT]

i guess that was a bad idea

[coolwelder62]

For those of you who want to see photos of the sheet metal componets pick up an Classic Ind. catalog and look at pages 270-477.My part's are the same part's found on these pages.Most of them came from Classic Ind. or Dynacorn Inc. Ordered thur one of their largest Dealer.:thankyou: