1968 thru 1973 Mustang Budnik GTX Wheels & Tires

[4mm]

Item Location (City/State): Laredo TX

Price:$2800 shipped within CONUS.

Description:1968 thru 1973 Mustang Budnik GTX Wheels & Tires

These wheels have been used for less than 50 total miles as evidenced by the condition of the wheels and tires.
The wheels are reverse lip, brushed finish with satin black centers-18x8 front and 18x10 rear. No nicks or scratches, just some dust on them.
Tires are BFG 245/40/ZR18 fronts and 295/35/ZR18s rear.
I first had them on my 1970 Mustang then on my 1971.

I carefully chose the backspacing and there is no wheel rub on either car. I am going back to a stock appearing 18" wheel so these are for sale.

Budniks current retail price is $3080+shipping with no tires. I will sell them for $2800 shipped to your door. Paypal is OK, thanks!

http://www.budnik.com/roadwheelitem.asp?scid=53&pid=519&pg=4

http://i42.tinypic.com/2aj6jj9.jpg
http://i43.tinypic.com/2rcr415.jpg
http://i39.tinypic.com/34e69t0.jpg
http://i42.tinypic.com/2rp38n5.jpg
http://i44.tinypic.com/315zchy.jpg
http://i41.tinypic.com/2wec9ba.jpg
http://i39.tinypic.com/9itxkj.jpg
http://i40.tinypic.com/qswo4n.jpg

[NvrDun71]

Willing to part out the tires and sell separate?

[4mm]

Sure but if I am able to sell the wheels first. :)

I am not in a rush to sell but I believe they will sell. Best price I got from forum vendors was $2800 plus shipping plus build time. Just for the wheels.

[boylunde]

PM sent

[jeff71]

Any pics of them on your 70?

[4mm]

Any pics of them on your 70?

Sorry. I don't.

[4mm]

Still available. I finally have the specs. The holidays kept me busy.

The backspacing on the rear wheels is 6.5 and the front is 4.5".

The total tire width of the rears is 11.5 and the fronts is 9.5. This isn't the tread width but the actual width from outer sidewall to outer sidewall. If the backspacing is not what you require, You can always buy thin spacers and get the exact backspacing you need.

[TheJDMan]

Any idea if these would fit a Fox body with 5 lug conversion?

[4mm]

The bolt spacing would be correct but I would need the specs for OEM wheel backspacing for a fox body then I could figure it out for you.

[4mm]

Bump

[4mm]

Sold on the other site. Thanks!