tyoneal
12-16-2013, 02:44 PM
Hi guys:
I just lost the 454 out of my 1997 K2500 Suburban. It died with 210k (RIP), but it was an off road, road trip, Tractor Hauling Beast.
With the Rancho Suspension, Heavest Bumpers I could find in case I got stuck, Winch, Lights, Hauling Rack, Nerf Steps, 34 inch KDW's, the truck itself probably weighed 8-9k pounds. The Trailor I pulled is primary for my tractor. The trailer loaded was just shy of 12k.
The 454 had everything that Banks used to make for a BBC which should have had the torque in the 550 pound feet, and Hp about 450.
Between the programming of the computer, cool air Box, Headers 3 inch exhaust it was marginal from a "Felt Safety" feeling when trying to pull my big trailer. You didn't want to see a car anywhere close before you started to get HWY speed.
4L80e Tranny
Ran a 12 Bolt 4:11 Posi in the rear
=======================
Problem: (Other than the obvious) If I buy a slightly used truck of similar size I will have to do a hell of a lot of work and spend $$$ to it to bring it up to where my current truck is, outside of buying the truck (2-3 year old)
Would like to see if I could get into a large displacement LSx of some number, and buy at the same time a 6L80e for it. (The current 4L80e is slipping pretty bad and will need to be taken down soon and replaced)
Anyone know who could do this and/or sell kits to do this?
Option:
Buy another BBC (Top end is gone on the right bank, Bottom end may have followed suit)
===========================
Very Very Important.
Which ever way I go I need to have the truck not necessarily need computers if BBC.
Installation of either engine, engine/tranny needs to be as plug and play as possible..
Please give me your best shots if you have the time.
Names and links would be a mechanical wet dream.
I live just North of Dallas Texas if you know someone who has also done the conversions, please don't be shy.
Thanks in advance,
Ty O'Neal
I just lost the 454 out of my 1997 K2500 Suburban. It died with 210k (RIP), but it was an off road, road trip, Tractor Hauling Beast.
With the Rancho Suspension, Heavest Bumpers I could find in case I got stuck, Winch, Lights, Hauling Rack, Nerf Steps, 34 inch KDW's, the truck itself probably weighed 8-9k pounds. The Trailor I pulled is primary for my tractor. The trailer loaded was just shy of 12k.
The 454 had everything that Banks used to make for a BBC which should have had the torque in the 550 pound feet, and Hp about 450.
Between the programming of the computer, cool air Box, Headers 3 inch exhaust it was marginal from a "Felt Safety" feeling when trying to pull my big trailer. You didn't want to see a car anywhere close before you started to get HWY speed.
4L80e Tranny
Ran a 12 Bolt 4:11 Posi in the rear
=======================
Problem: (Other than the obvious) If I buy a slightly used truck of similar size I will have to do a hell of a lot of work and spend $$$ to it to bring it up to where my current truck is, outside of buying the truck (2-3 year old)
Would like to see if I could get into a large displacement LSx of some number, and buy at the same time a 6L80e for it. (The current 4L80e is slipping pretty bad and will need to be taken down soon and replaced)
Anyone know who could do this and/or sell kits to do this?
Option:
Buy another BBC (Top end is gone on the right bank, Bottom end may have followed suit)
===========================
Very Very Important.
Which ever way I go I need to have the truck not necessarily need computers if BBC.
Installation of either engine, engine/tranny needs to be as plug and play as possible..
Please give me your best shots if you have the time.
Names and links would be a mechanical wet dream.
I live just North of Dallas Texas if you know someone who has also done the conversions, please don't be shy.
Thanks in advance,
Ty O'Neal