Big Oak Garage 65 Dart

[Big Oak Garage]

1965 Dodge Dart GT it was a 273 with a 4 speed. Its getting a supercharged 5.7 punched out to a 392 with a tremec 6 speed. The front suspension is from Magnum Force and the rear suspension is a custom torque arm with a watts link with ride tech coil overs. Wayne and Pam McGriff at M and M will be taking care of the interior.

[ironworks]

Hay Will.

Looks good. Let's see some more pics. Your cutting that deal up a lot.

[Rick D]

WOW that's a nice start!! Looks great!

[coolwelder62]

Very cool & also very different.

[GregWeld]

Subscribed!



Hey Will… Post up a rendering???

[69c4x11]

Will,,,:thumbsup: Glad to see you post,,, Now I'll even spend more time on here ,,,THANKS!!! Spend more time on the car for the customer!! We don't have to see every cut weld, pat on the back !!! Catch my drift ?? Catch You and Pop later,,

[GoolsbyCustoms]

Gonna be killer Will, but I know this is just a tease..... :D
Glad to have you all on here!

[waynieZ]

I'm going to love watching this one go together, awesome project. My wife had a 66 GT convertible with a 273 when I met her, of course that was in 1973. Subscribed

[Big Oak Garage]

Here are a couple of more pics and I will be posting up some more soon.

[CarterHickmanDesigns]

Why did you cut it in half? :y0!:

[Ketzer]

Holy Smokes! and I was nervous just cutting the floor out of my project...!

Amazing work!


Jeff-

[Big Oak Garage]

The reason for cutting it in half is we wanted the car to look more aggressive and have better proportions. These car are really narrow and really long, so we wedge cut the roof 2 inches and instead of leaning the A pillar or lengthening the roof we decided to shorten the car 2 inches behind the B pillar. We also stretched the wheelbase 2 inches and that will allow us the move the front wheel opening forward in the front fender 4 inches to make the overbite go away.

[coolwelder62]

Wow!!! Now that's a big step.This is going to be an awesome project.Please keep posting.

[MoparCar]

I love it! Great skills and project!
Wes

[rjsjea]

Damn.......that's an involved deal right there. Seldom built car, keep the updates coming!!

[Big Oak Garage]

Here are some more pics. When we cut the inner wheelhouse out behind it we found where an unhappy assembly line worker had been. On the inside of the quarter panel they had wrote a 4 letter word in the rubber coating sprayed on there by the factory. We got the body stuck back together and the front wheel well cut out and playing around with the placement of that.

[64pontiac]

Awesome work guys!! Really love to see this era of Dart done right!

Quick question, if you rake the roof and dont lean the pillar back, what do you do with the glass, have it ground? Or do you have someone that cuts it?

Wicked work. Love it!

[Big Oak Garage]

Awesome work guys!! Really love to see this era of Dart done right!

Quick question, if you rake the roof and dont lean the pillar back, what do you do with the glass, have it ground? Or do you have someone that cuts it?

Wicked work. Love it!


The guy that is doing the work on the windshield said he was just going to grind it. We are not going to be using the stock rubber so it will only need to be ground down about a 3/8.

[waynieZ]

Sweet!

[Big Oak Garage]

Here are some shots of what we done to the rear of the car and some wheel tub work as well.

[66fury]

nice !

[tubbed69]

Cool project guys,doing some nice work:thumbsup:

[Ketzer]

I spy an early 50's wagon back there! Whats up with that?


Jeff-

[coolwelder62]

Wow!!! Just keep's getting better with every post.Rear valance is Awesome.

[Big Oak Garage]

I spy an early 50's wagon back there! Whats up with that?


Jeff-

It's a 51 Tin Woody that we just about got finished up

[Ketzer]

NICE!! :thankyou:



Jeff-

[waynieZ]

I agree. Nice!

[Tincup]

Nice to see someone else giving some love to an early - A. Here is a pic of mine.

[waynieZ]

I've seen Tincup's car its beautiful. He did an awesome job.

[Big Oak Garage]

Nice to see someone else giving some love to an early - A. Here is a pic of mine.

I actually followed your build on the A body forum. There are not many people out there building these so it was nice watching yours come together. I would love to see it in person.

[Big Oak Garage]

Here we cut off the part of the deck lid that went down to the bumper and raised the body up past the taillights. We wanted to clean this area up where there was no gap between the taillights and the gas filler will be in the back panel, fabricated a new package tray and have started the exhaust.

[GregWeld]

So glad you decided to join us on Lat G --- you're doing some really killer fab work! I don't care what kind of car it's on....


:thumbsup:

[Big Oak Garage]

So glad you decided to join us on Lat G --- you're doing some really killer fab work! I don't care what kind of car it's on....


:thumbsup:

Thanks. We have been watching Lat G for a while and patiently waiting for the right project to come in the door so we could post some of our work.

[waynieZ]

I agree with Greg, awesome work.

[MoparCar]

Just awesome workmanship. Wow.

[onelapduster]

Amazing work! Your correcting everything MaMopar did wrong to this car. Keep up the fantastic fab work and picture progress.

[DENTGUY]

Impressive work!

[S Griffin]

Nice work!

[Big Oak Garage]

Thanks guys for all of the nice comments. Here is the rendering for the back panel. This rear panel will included the gas filler, all led lighting and a backup camera.

[waynieZ]

That is going to look sweet!

[Big Oak Garage]

We got the exhaust and tips all finished up and removed what was hanging down under the cowl and raised that area up so we would have more room behind the dash.

[Ricochet]

WOW!! Huge undertaking!! Looks killer. Going back and looking at the first pics along with the overall shots on page 2 really shows how much leaner it looks with the stretched wheelbase etc. Great job! Nice workmanship!

[rjsjea]

Nice fab skills....

[Al Moreno]

I enjoy seeing these build were you take an ugly duckling and make it look cool. Kinda like the Ring Brothers Afterburner. Not difficult to make a 69 Camaro look coll. This on the other hand takes imagination. Great job guys! Keep the pics coming.

[214Chevy]

Looking good. I agree totally with what Al said. Not a common build, but you guys are making it so cool. By the way, what rear chassis suspension is that? Looks like Street Rod Garage stuff.

[Big Oak Garage]

Looking good. I agree totally with what Al said. Not a common build, but you guys are making it so cool. By the way, what rear chassis suspension is that? Looks like Street Rod Garage stuff.

Thanks

The rear suspension is street rod garage. We did change it up a bit though.

[214Chevy]

Thanks

The rear suspension is street rod garage. We did change it up a bit though.

I'd know their stuff anywhere. SRG built my chassis too. Randy, Chris, and David....a great bunch of guys to deal with. I'd recommend their stuff to anyone. Car is looking sweet. Love the exhaust tips in the rear pan/valance.

[Big Oak Garage]

Here are some pics of us moving the front wheel opening forward 4 inches and the braces that we made to tie the body and the frame rails together.

[coolwelder62]

Awesome!!!!!!!

[tones2SS]

Great work guys!

[Big Oak Garage]

Awesome!!!!!!!

Great work guys!

Thanks guys

[WSSix]

Any particular reason for the large saucer dimples? Was it just to strengthen the panels and round tie it in to the other dimples and punched holes? Looks good regardless of the reason. I really like this build. Keep up the great work.

[wiedemab]

Ummm -- -WOW!

Fantastic work.

[Big Oak Garage]

Any particular reason for the large saucer dimples? Was it just to strengthen the panels and round tie it in to the other dimples and punched holes? Looks good regardless of the reason. I really like this build. Keep up the great work.

The main reason for the circles was to ad character to the panel. There are circles all over this project so we just continued with the circles under the car.

[Royalworks]

Wow you guys! love this build. Love tincups as well. Love that color green.

[waynieZ]

I've seen Tincup's build in person. Awesome!

[69c4x11]

Will, great job ! Killer look,! Pop has taught you well , now get back to work,,Talked to Pop the other day,,see you soon,,

[Big Oak Garage]

Here we are getting going on all the under hood fab.

[onelapduster]

This build just keep getting better. Truly impressed :thumbsup:

[Ricochet]

Looks stellar! Nice progress and design!

[waynieZ]

Awesome fab and great imagination.

[Big Oak Garage]

This build just keep getting better. Truly impressed :thumbsup:

Looks stellar! Nice progress and design!

Awesome fab and great imagination.

Thanks guys.

[Big Oak Garage]

We got the inner fenders all finished up and the top and bottom tank for the radiator made and started on getting the exact placement of the radiator.

[esm]

UNREAL !!! great work love the odd ball bodystyle

[aggie91]

Absolutely amazing work you guys are doing. Al said it first, taking an ugly duckling of a car and making cool. Your work is over the top!:goggles:

[Big Oak Garage]

UNREAL !!! great work love the odd ball bodystyle

Absolutely amazing work you guys are doing. Al said it first, taking an ugly duckling of a car and making cool. Your work is over the top!:goggles:


Thanks guys. This is a fun project. The customer has let us get real creative on this one.

[waynieZ]

He'll be very pleased with what your doing. Awesome! Can you show what that die looks like from the side?
Thanks

[Big Oak Garage]

He'll be very pleased with what your doing. Awesome! Can you show what that die looks like from the side?
Thanks


Here it is. The top part of it is a half of a v band clamp with an 11 gauge top and the bottom is just some scrap that we had laying around. I know it is crude but it got the job done and did not take long to make.

[69c4x11]

[QUOTE=Big Oak Garage;534209]Here it is. The top part of it is a half of a v band clamp with an 11 gauge top and the bottom is just some scrap that we had laying around. I know it is crude but it got the job done and did not take long to make.[/QUOTE
Bama Boys will perservere ! Show-um ,WILL !!!:thumbsup:

[214Chevy]

You guys aren't messing around, I see.... :ohsnap:

[tones2SS]

Wow, great stuff guys.
That engine bay looks sick!

[Big Oak Garage]

You guys aren't messing around, I see.... :ohsnap:

Wow, great stuff guys.
That engine bay looks sick!


Thanks. I will post up what we are doing with the valve covers soon.

[Big Oak Garage]

Here are some little detail pics of the tips, hood hinges and the door handles.

[Al Moreno]

Holly crap! You guys are on FIRE! Are those Austin handles?

[coolwelder62]

Very Cool!!!!!!!

[GregWeld]

So dang impressive!

[Big Oak Garage]

Holly crap! You guys are on FIRE! Are those Austin handles?


The handles are actually out of a Nissan GTR. We changed the trim ring up so it did no go all the way to the edge of the door.

[69sms]

ridiculously cool!

[waynieZ]

Wow This is awesome!!!

[MSTSFabbed]

I am loving this! Nice job on the hood hinges, I know what a pain setting up struts can be and that is a slick job! Keep it coming, you can't post too many pictures I promise.

[mrgm]

I am glad I found this build. :headspin:

[srh3trinity]

I have seen the build in person and it is good that they post pictures of the details. You could spend hours pouring over the car and still not notice some of the finer details and fab unless they were pointed out.

[GoolsbyCustoms]

Here are some little detail pics of the tips, hood hinges and the door handles.

Gonna be killer guys , cant wait

[RECOVERY ROOM]

Looking good Will...now find the Hotel for nashville..LOL

[RECOVERY ROOM]

This is a good one Buddy!!

[Big Oak Garage]

Thanks for all the nice comments guys. Here are the valve covers. They are a set of custom late model Hemi valve covers that we modified and retrofitted a set of early Hemi plug wire covers to them.

[riles]

Boy, that's quite an undertaking and I love the unique choice in the build. Can't wait to see the finished product.

[waynieZ]

Nice!

[76orangewagon]

Awesome build, look forward to every post and update (especially with pic's)
I see it on FABO also but professional/quality build's are more common here. Keep em' coming.

[Big Oak Garage]

We got the gas tank in and mounted and the rear panel that covers the gas tank made and installed.

[69c4x11]

Killer ! Keep the pics coming ,,,, :gitrdun: :gitrdun:

[Big Oak Garage]

Here are the new headlight buckets that we made to fit the custom headlights that we had Greening auto company make for us.

[Al Moreno]

Wow!!! This is going to be a bench mark car. Kinda reminds me of Ring Brother's Afterburner. Keep the pics coming :king:

[rjsjea]

SMOTY caliber perhaps?

[GrabberGT]

SMOTY caliber perhaps?

Its got my vote and its not even done yet.

[214Chevy]

I bet I'm not the only one who didn't see this one coming...am I?:hitaxeonthehead: You guys are taking this one to another level. :trophy-1302:

[Big Oak Garage]

Wow!!! This is going to be a bench mark car. Kinda reminds me of Ring Brother's Afterburner. Keep the pics coming :king:

Thanks Al.

SMOTY caliber perhaps?

We know that July will be here before you know it. We are working hard to get it there.

Its got my vote and its not even done yet.

Thanks. We enjoyed watching you wheel the hell out of your car in Texas a couple of years ago.

I bet I'm not the only one who didn't see this one coming...am I?:hitaxeonthehead: You guys are taking this one to another level. :trophy-1302:

Thanks. We are lucky to have a customer that has let us take his project to this level.

[Big Oak Garage]

Thanks to Brian Stupski for the killer job on the front end design. The front bumper is boxed on the back side and so the openings supply air to the air box witch will be located on the drivers side under the headlight.

[Big Oak Garage]

This was the side profile before we made any changes

[glassman]

I missed this thread before. Man am i glad i found it. Wow. I love everything you guys are doing. Great eyes, great taste, great craftmenship, great vision. Love it!!!

[coolwelder62]

This going a be an amazing ride when it's finished.Thank's for sharing.

[syborg tt]

I missed this thread before. Man am i glad i found it. Wow. I love everything you guys are doing. Great eyes, great taste, great craftmenship, great vision. Love it!!!

I am glad I found it and also scarred it's Just more crazy idea's for the next project !!!

I can't wait to see this car in person

[Big Oak Garage]

I missed this thread before. Man am i glad i found it. Wow. I love everything you guys are doing. Great eyes, great taste, great craftmenship, great vision. Love it!!!

This going a be an amazing ride when it's finished.Thank's for sharing.

I am glad I found it and also scarred it's Just more crazy idea's for the next project !!!

I can't wait to see this car in person


Thanks guys. We will have the car out sometime this year. I am not exactly sure when and where all we will be going with it, but when it gets finished we will be showing it all over the place.

[Big Oak Garage]

Here is the grille being made and a pic of the under hood with the radiator, inter cooler and A/C condenser finished up.

[NOPANTS68]

man that engine bay is incredible. Very nice work. I love the odd cars like this one.................er I mean non-Camaros.

[waynieZ]

It looks great. Nice work.

[1968 GTO Resto-Mod]

this is such an incredible build!
thanks for posting such nice photos of your work...
stoked to see the updates on this project!
danny

[214Chevy]

Sweet.....keep the pics coming.:king:

[tones2SS]

Looks killer. That engine bay is nasty indeed.
Is that a Magnacharger I spy?

[Big Oak Garage]

man that engine bay is incredible. Very nice work. I love the odd cars like this one.................er I mean non-Camaros.

It looks great. Nice work.

this is such an incredible build!
thanks for posting such nice photos of your work...
stoked to see the updates on this project!
danny

Sweet.....keep the pics coming.:king:

Thanks Guys

Looks killer. That engine bay is nasty indeed.
Is that a Magnacharger I spy?

Thanks. Yup that's a Magnacharger

[novahollic]

I really like how you incorporated Dodge's two slash logo into the engine bay. Any ideas on how its going to be painted in there?

[Big Oak Garage]

I really like how you incorporated Dodge's two slash logo into the engine bay. Any ideas on how its going to be painted in there?

Thanks. We are 100% on the exact color, but the slashes will be a contrasting color.

[jarhead]

such a great build, so many details, nice work!

[Big Oak Garage]

such a great build, so many details, nice work!

Thank you.

[Big Oak Garage]

The defrost vents are out of the mill

[66fury]

i need more !!!

[ironworks]

Will - Is the plan to unveil this car at Columbus still? I'm thinking of going out to this show to hang out for the weekend but would be interested in seeing this car up close.

Rodger

[Big Oak Garage]

Will - Is the plan to unveil this car at Columbus still? I'm thinking of going out to this show to hang out for the weekend but would be interested in seeing this car up close.

Rodger

It will not make Columbus. We had a couple of set back and we are not going to push it. I am not exactly sure when we will have it out, but it will be sometime late this year or early next year.

[ironworks]

It will not make Columbus. We had a couple of set back and we are not going to push it. I am not exactly sure when we will have it out, but it will be sometime late this year or early next year.

Are you guys gonna still go to Columbus? I have to go to Indy this summer to pick up my new trailer so I was thinking of putting it all together into one trip.

[Big Oak Garage]

Are you guys gonna still go to Columbus? I have to go to Indy this summer to pick up my new trailer so I was thinking of putting it all together into one trip.


Yea. We will be there. I will be bring the tin woody

[ironworks]

Yea. We will be there. I will be bring the tin woody

The woody is cool.

I might drive the chevelle out with the customer ( Greg Heinrich ) and my guys might come out in my dually so I can drive the new trailer home with the Chevelle.

http://i616.photobucket.com/albums/tt248/ironworksspeed/Fairway%20Chevrolet%201970%20Chevelle/20140417_132247.jpg (http://s616.photobucket.com/user/ironworksspeed/media/Fairway%20Chevrolet%201970%20Chevelle/20140417_132247.jpg.html)

[Kcrain]

This is a great build care to share up dates.

[YAMATHUMP]

Fantastic work guys, thanks for the updates!

[Big Oak Garage]

Sorry for the delay on the update pics. I will be posting some in the next couple of months.

[syborg tt]

Sorry for the delay on the update pics. I will be posting some in the next couple of months.

After Detroit i'm guessing.

Heck this car is the only reason I am going this year.

[RECOVERY ROOM]

Im going, there's going to be a bunch of us there Marty, Will is going to buy me some drinks he said

[Big Oak Garage]

Who said that I was going?

[RECOVERY ROOM]

Oh yeah, I forgot..Maybe you should

[syborg tt]

I'm a cheap date so one of you need to buy me a drink.

I primarily drink Water but if your buying I will have an Iced Tea no Sugar please. :lmao:

[Big Oak Garage]

Little color preview

[Big Oak Garage]

Little teaser

[WSSix]

Well, I definitely like what I see so far.

[Matt@BOS]

Somehow, I missed this build until just now! I will definitely be following it until it's done!

[cascius]

Saw a picture of the car today on Facebook. Can't wait to see all of the final pics from you guys. Looks killer.

[aidanfancystang]

congrats on the great 8

[Musclerodz]

Tons of pics on Instagram. Can't wait till they are updated here.

[Riddler]

I must of took 25 pictures of this car today. I'm working a 76 Duster and I have a real soft spot for A body mopars. The guys over at www.forabodiesonly.com are getting a real kick out of this car.

Would you mind if I posted some of my pictures?

Riddler

[Big Oak Garage]

I must of took 25 pictures of this car today. I'm working a 76 Duster and I have a real soft spot for A body mopars. The guys over at www.forabodiesonly.com are getting a real kick out of this car.

Would you mind if I posted some of my pictures?

Riddler
Post away. I will put up more build pics soon.

[Big Oak Garage]

Here it is

[DOOM]

Love it ! You guys nailed it very well done.

[WSSix]

x2 looks great! Love that color.

[Big Oak Garage]

Here it is on the ground.

[64pontiac]

Congratulations Big Oak Garage on the Great 8 win! That is a stunning car, very well done. Glad you got the recognition you deserve. Quick question cause Im dying to know.... did having previously posted build pictures and body shots etc play a part in any way to not making it to the top? I know the Imposter is a stunning car, I was just curious. Im a stranger to Detroit Autorama, but from what I read they make it sound like you cant show anything really of the car. Just curious!

Congrats though, It would have been cool to see a Lat-G member such as yourself take home the Ridler. But hot damn, a Great 8...... I can only imagine what it feels like. Great job, post some more build pics! I want to see the interior!!

[waynieZ]

That looks sweet!

[syborg tt]

car looks great now we need more build pics please.

[srh3trinity]

It was my pick to win, if you had a stock Dart sitting next to it for judging, then you could really appreciate how much work this took. It came out great.

[tones2SS]

That looks sweet!

^^What Wayne said.
I'm kind of partial to the color. :RunninDog:

[waynieZ]

When I met my wife she was driving a 66 Dart convert. (I want to say GT? with a 273) Nice quick little car.

[ccracin]

This car was stunning in person and Will and the guys that built it are first class. They didn't know me from Adam and took all the time I wanted to talk about it. I posted this in Al's Autorama thread but thought I should put it here as well. To everyone that considers themselves builders and have people pay them to build these cars take note.

The best part of the show to me wasn't even one of the cars or even this car. I obviously spent some time in the Great 8 area Saturday. All the time I was there I noticed the owner of the Dart. His name is Willie Maise. I could not help but notice what a fantastic time he was having the whole time he was there. He truly enjoyed talking to people about the car and was so proud. He was laughing and smiling every time I saw him. Anything competitive brings alot of drama, especially indoor car shows with this type of award. On the outside it looked as though he could have cared less. He was proud of his car, proud they made the great 8 and was having a blast. That's what this is all about in my opinion. So for Will Posey and Big Oak Garage, not only did they build a fantastic car, they made one owner a very happy and satisfied and gave him a weekend he will I'm sure remember the rest of his life! That's what it's about in my opinion. Kudos Will!

[waynieZ]

Well said.

[Big Oak Garage]

Sorry for the delay on the build pics. We are finally getting back into the swing of things since Detroit.

[Justin@EntropyRad]

Bare metal just screams "awesome"

[BigJoe]

^^^ I second that

[Big Oak Garage]

Here are some more

[jmracecars]

Here are some more
The Dart came out excellant.
Are the windows glass or lexan? i am doing a 68 camaro. I wedged the roof and laid the windshield back. I need to get door glass made. Do you have a number to a place? thanks

[tones2SS]

Wow, that thing is looking wicked.
Great updates.

[Big Oak Garage]

The Dart came out excellant.
Are the windows glass or lexan? i am doing a 68 camaro. I wedged the roof and laid the windshield back. I need to get door glass made. Do you have a number to a place? thanks

The door windows are glass, but they are flat. You can make templates and have them made out of acrylic. Carmen at AM hot rod glass can handle that for you. They can have a scratch gaurd put on it so it will not scratch. http://amhotrodglass.com

[jmracecars]

The door windows are glass, but they are flat. You can make templates and have them made out of acrylic. Carmen at AM hot rod glass can handle that for you. They can have a scratch gaurd put on it so it will not scratch. http://amhotrodglass.com

Thanks

[WSSix]

please keep the build pics coming. You guys did a great job.

[RIDES BY DESIGN]

wow what ashame... i only now just discovered this build. fantastic!!!

[rustomatic]

Great choice of car--I have a friend who built and ran one of these Darts in the La Carrera Panamericana in 2010 or so. It'll be cool to see this car moving!

[jarhead]

The handles are actually out of a Nissan GTR. We changed the trim ring up so it did no go all the way to the edge of the door.

Where does a person find Nissan GTR handles?

Do you have install pictures of how you put them in?


Thanks, Joe

[RIDES BY DESIGN]

Where does a person find Nissan GTR handles?

Do you have install pictures of how you put them in?


Thanks, Joe

http://www.speedforsale.com/nissangtrparts/carbon-dry-japan-carbon-dry-japan-door-handles-p-1183.html

[Big Oak Garage]

Where does a person find Nissan GTR handles?

Do you have install pictures of how you put them in?


Thanks, Joe


Joe

You have to get them from a Nissan dealer and the dealer we used required a VIN number to purchase any GTR parts. So knowing someone that owns one will come in handy. We used the outside handles, interior handles, latch and striker. I will see if I can did up the installation pics for you.

[Big Oak Garage]

http://www.speedforsale.com/nissangtrparts/carbon-dry-japan-carbon-dry-japan-door-handles-p-1183.html



This is just the part that you pull to open the door.You need the handle assembly to make it work.

[jarhead]

Thanks!

[Big Oak Garage]

Little Video
ADREw9yThrU

[FlameBroiled]

Very Cool Car!!!

[Big Oak Garage]

The Finished Product. Thanks to www.scottiedtv.com for going out of his way to shoot the car in the raw and being at Detroit for the debut.

nszY1PvKgWM

[Evan Iroc-Z]

What a beautiful work of art! You guys nailed every aspect in this car.

[tubbed69]

Congrats on making top 5 for SMOY,first time seeing this car and it is extremely nice build and deserved top 5 along with Corvette.Great Work guys:trophy-1302:

[waynieZ]

Congratulation's on the top 5. Great build.

[RECOVERY ROOM]

One of the top 5 cars there for sure, It deserved to be in

[DOOM]

Well deserved!!!! What a beautiful car!

[Big Oak Garage]

Congrats on making top 5 for SMOY,first time seeing this car and it is extremely nice build and deserved top 5 along with Corvette.Great Work guys:trophy-1302:

Congratulation's on the top 5. Great build.

One of the top 5 cars there for sure, It deserved to be in

Well deserved!!!! What a beautiful car!

Thanks guys.

[waynieZ]

Thanks for sharing!

[Big Oak Garage]

Thanks for sharing!


Your very welcome. We do not usually build muscle cars, so when we have another one going I will share it to.

[MSTSFabbed]

It was fun to see this car in person this weekend! Yall killed it, and it was cool to know some of the work that went into it. I would have loved to stay and talk more! I'll keep my eye open for more from yall.