Goodguys 2015 Giveaway C10 by Scott's Hotrods

[FaBrycation]

Scott's is pleased to announce the build thread for the Goodguys 2015 C-10 Giveaway truck.

We are very excited to get this opportunity and are going to do our best to make this the nicest giveaway vehicle to date.

Here is a general lay out on the Goodguys giveaway truck

1.Scotts tube chassis
Tube x-memeber
Body mounts
100% tig welded

Scotts standard ifs
New power rack
Tubular upper and lower a-arms
Cnc machined rodends
Modular dropped C-10 spindal
Ridetech SA coil-overs
Torsion splined bar
Wilwood 14 inch slotted rotors
Wilwood W6A Caliper

Scotts L-s m/m
Scotts tranny mount

Brake lines plumbed s.s
Fuel lines plumbed s.s

Scotts standard 4-bar
Ridetech SA coil-overs
Scotts Watts link

Moser fabricated 9 inch rearend
Wave track 373
33 spline axles
Wilwood 14 inch slotted rotors
Wilwood W4A caliper

Scotts fuel tank with efi pump

Wheels
Billet specialties
Rear 20x12
Front 20x10

Motor
Lingenfelter Performance LS3 motor
TCI automotive tranny

Headers and Exhaust
Custom S.S headers made by Scotts
S.S mandrel bent exhaust by Scotts

Ride height on truck will be 4 1/2 from ground
Overall height on C-10 will be 56 1/2 to the ground

Body mods
Several custom modifications to many to list
There will be a ton of build pics for you all to see

Paint
Palmers customs to lay down one of his stellar jobs

Interior
Ron Mangus to do one of his one off interiors

Our goal hear is to build a truck that you all will remember for years down the road

Completion of this build will be early Spring 2014

Lets get this started! When the truck came to us, the original cab seemed to be in ok shape. But as any experienced builder knows, its what you cant see that will haunt you.

After starting the tear down it became evident that this cab had a lot of issues that obviously weren't seen. So we dismantled the cab, sent it out to get blasted and primed, and have now begun the process of repairing and customizing the cab.

here are the pictures.
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0458_zps64dcdf4b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0458_zps64dcdf4b.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0460_zpsf0cae7ed.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0460_zpsf0cae7ed.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0462_zpsa3138aff.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0462_zpsa3138aff.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0464_zpsa7682690.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0464_zpsa7682690.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0465_zps8603a46b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0465_zps8603a46b.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0463_zps1fbb97bc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0463_zps1fbb97bc.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0470_zpsaa9c79f4.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0470_zpsaa9c79f4.jpg.html)

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0466_zps6696068e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0466_zps6696068e.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0467_zpsbd06b82c.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0467_zpsbd06b82c.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0480_zpse35697da.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0480_zpse35697da.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0530_zpsf498f4b0.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0530_zpsf498f4b0.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0524_zps11f09da8.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0524_zps11f09da8.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0529_zps5b5dc465.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0529_zps5b5dc465.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0525_zpse43c3d21.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0525_zpse43c3d21.jpg.html)

[FaBrycation]

as you can see. lots of underlying rust.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0541_zps52cbdbbc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0541_zps52cbdbbc.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0533_zpsb9673983.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0533_zpsb9673983.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0534_zps7b8884b1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0534_zps7b8884b1.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0538_zps4f0b339f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0538_zps4f0b339f.jpg.html)

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0595_zps492f56b1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0595_zps492f56b1.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0593_zps05a808c6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0593_zps05a808c6.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0830_zpsb8457999.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0830_zpsb8457999.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0838_zps06dd9141.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0838_zps06dd9141.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0843_zpsc842a986.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0843_zpsc842a986.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0875_zps3706f61f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0875_zps3706f61f.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0876_zpsdd19a801.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0876_zpsdd19a801.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0877_zpsc9d486b2.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0877_zpsc9d486b2.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0892_zpscd061b07.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0892_zpscd061b07.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0891_zps6f03c39d.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0891_zps6f03c39d.jpg.html)

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0916_zps99b88fc8.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0916_zps99b88fc8.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131120_141112_zpsa672e751.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131120_141112_zpsa672e751.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131121_090206_zps79e55f7b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131121_090206_zps79e55f7b.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131121_090215_zps76ed0906.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131121_090215_zps76ed0906.jpg.html)
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_0925_zps56ec49fc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_0925_zps56ec49fc.jpg.html)

[05chevy]

The truck looks great so far! This is the same body that was at Ironworks im assuming? Are you guys using the front end that was already built? And why not just have the truck dipped an e coated? I cant wait to see more of this!

[FaBrycation]

The truck looks great so far! This is the same body that was at Ironworks im assuming? Are you guys using the front end that was already built? And why not just have the truck dipped an e coated? I cant wait to see more of this!

Thanks. it will be getting one of Our Scott's Hotrods C-10 chassis with all of our components

As for the having it blasted? We had a situation a few years back where we had dipped and coated a car. after the car was painted some remnants from the dipping caused it to eat the paint around spot weld seams and had to have it all redone. They use a plastic media to blast it. Also that is why we had to remove the inner cab structure, so it could be blasted internally and properly remove all of the cancer.

[coolwelder62]

Nice work!!!:thumbsup:

[SWAPMEETCRAZY]

Looks great Brycen...Here's my latest addition to the "different"....just which I had your talent and tools...!!!.Whats a good time of day to call Justin on those cowl vents...thanx jim

[FaBrycation]

Looks great Brycen...Here's my latest addition to the "different"....just which I had your talent and tools...!!!.Whats a good time of day to call Justin on those cowl vents...thanx jim

awesome, Looks great! You can call anytime 8-5 Monday -friday.

Nice work!!!:thumbsup:

Thanks!

[214Chevy]

What are the plans for this truck.....wheel size, motor/tranny combo, suspension, etc?

[Scotts Hotrods]

What are the plans for this truck.....wheel size, motor/tranny combo, suspension, etc?

Here is a general lay out on the Goodguys giveaway truck

1.Scotts tube chassis
Tube x-memeber
Body mounts
100% tig welded

Scotts standard ifs
New power rack
Tubular upper and lower a-arms
Cnc machined rodends
Modular dropped C-10 spindal
Ridetech SA coil-overs
Torsion splined bar
Wilwood 14 inch slotted rotors
Wilwood W6A Caliper

Scotts L-s m/m
Scotts tranny mount

Brake lines plumbed s.s
Fuel lines plumbed s.s

Scotts standard 4-bar
Ridetech SA coil-overs
Scotts Watts link

Moser fabricated 9 inch rearend
Wave track 373
33 spline axles
Wilwood 14 inch slotted rotors
Wilwood W4A caliper

Scotts fuel tank with efi pump

Wheels
Billet specialties
Rear 20x12
Front 20x10

Motor
Built L-s 3 motor
TCI automotive tranny

Headers and Exhaust
Custom S.S headers made by Scotts
S.S mandrel bent exhaust by Scotts

Ride height on truck will be 4 1/2 from ground
Overall height on C-10 will be 56 1/2 to the ground

Body mods
Several custom modifications to many to list
There will be a ton of build pics for you all to see

Paint
Palmers customs to lay down one of his stellar jobs

Interior
Ron Mangus to do one of his one off interiors

Our goal hear is to build a truck that you all will remember for years down the road

Completion of this build will be early Spring 2014

Justin

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131121_153002_zpsc755f185.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_083642_zpsa8280bfc.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_092250_zps583fdfb9.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_094448_zps8e114719.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_092322_zpse76e44bc.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_092314_zps7c0f95f6.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_094458_zps2d6a45d3.jpg

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_170140_zps5aa27daf.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_170202_zpsbb760a17.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131122_170211_zpsfaa9c0d1.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131125_103155_zpsc3eb3a68.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131125_103159_zpsf68c96bc.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131125_103218_zpsa9440641.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131125_115556_zps84f63814.jpg

[SWAPMEETCRAZY]

Taller rear glass or are we doin a lite chop???

[Scotts Hotrods]

Taller rear glass or are we doin a lite chop???

Mild top chop.Wait till you see it will look good.There will be several mods on the top.The back window channel you see now is brought down lower so the factory rear glass will line up with the side windows on the doors.

Justin

[SWAPMEETCRAZY]

Am i to guess u are goin to change the rear cab roll to eliminate the cab seam and smooth that roll out...Somewhere I saw this to late to do mine...was it u who makes that piece or someone else???.......jim (calling u in am about cowls)

[FaBrycation]

All of the new metal on the back of the cab that you see in the pictures will be just as it is when the chop is done. At this point, all we have to do is cut and lower the roof to meet the new window height.

Yes we make the cowl panels. Ask for Justin when you call.

[SWAPMEETCRAZY]

All of the new metal on the back of the cab that you see in the pictures will be just as it is when the chop is done. At this point, all we have to do is cut and lower the roof to meet the new window height.

Yes we make the cowl panels. Ask for Justin when you call.

Brycen the part I was curious about was where the cab seam is over the roll above the rear glass....I've seen a new piece formed that puts a nice new roll and eliminates that seam..Thought Justin or maybe it was Brothers that offered that...It's subtle but really changes rear cab profile...thanx....jim

[SWAPMEETCRAZY]

here's the part I was talking about...It was Justin who made it

http://67-72chevytrucks.com/vboard/showthread.php?p=3727198

[FaBrycation]

Got ya, yes we will be doing that also.

[FaBrycation]

Here's a few more to keep you guys busy.
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131126_090300_zpsc18764f4.jpg
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131126_171314_zps92ecea4c.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131126_171325_zps6ddc3adb.jpg
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131126_171400_zps5892ebf7.jpg
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131126_171751_zpsd261e126.jpg

[Ketzer]

Amazing watching this fab work come together!
Why are the rounded corners cut out in those end panels?


Jeff-

[FaBrycation]

Amazing watching this fab work come together!
Why are the rounded corners cut out in those end panels?


Jeff-

It's only because the piece is not finished yet. The step was to deep to do it on the bead roller so they are being made separate and then being welded in. Finished photos will be posted later today.

[ccracin]

Come on guys, this is the kind of work a lot of folks want to see. Let's not muck up the works. Take this off line if it can't be let go.

Looks awesome guys! More truck love!

MORE PICS PLEASE! :thankyou:

[FaBrycation]

Looks awesome guys! More truck love!

MORE PICS PLEASE! :thankyou:

Thanks for your enthusiasm! I'll post more soon

[214Chevy]

here's the part I was talking about...It was Justin who made it

http://67-72chevytrucks.com/vboard/showthread.php?p=3727198

I bought this very exact piece from Scott's 3 years ago for my C10.

[SWAPMEETCRAZY]

I bought this very exact piece from Scott's 3 years ago for my C10.

Did u install yet?? I'm actually almost past the point to change that....but boy it sure changes the look....as Justin said ....takes that "rear beak" off......jim

[FaBrycation]

This will be the last of the new pictures until Monday so I hope you all enjoy them!

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131127_1500291_zps07330388.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131127_170753_zps46b5d5d7.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131127_170801_zps72a0b920.jpg http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131127_170813_zpsbd875867.jpg

[SWAPMEETCRAZY]

Makes me want to pack my cab in a crate and ship to CA............just sayin:hapdance:

[FaBrycation]

Makes me want to pack my cab in a crate and ship to CA............just sayin:hapdance:

I don't understand what your waiting on ;)

[214Chevy]

Did u install yet?? I'm actually almost past the point to change that....but boy it sure changes the look....as Justin said ....takes that "rear beak" off......jim

Naw, sorry I hadn't yet. At that time I was about ready to start on my truck. But, that was before I decided to redo my Chevelle, which has since spiraled way out of control. I have told several people I literally have every piece to do my truck......HRE wheels, LS2, 6L80 tranny, Baer 6-piston brakes, NOS hood and NOS L/R fenders, etc and I just need to get around to starting on it. But, I promised myself not to until I finish my Chevelle. Now, suddenly C10's are coming on strong making me very anxious.

[Rick D]

Naw, sorry I hadn't yet. At that time I was about ready to start on my truck. But, that was before I decided to redo my Chevelle, which has since spiraled way out of control. I have told several people I literally have every piece to do my truck......HRE wheels, LS2, 6L80 tranny, Baer 6-piston brakes, NOS hood and NOS L/R fenders, etc and I just need to get around to starting on it. But, I promised myself not to until I finish my Chevelle. Now, suddenly C10's are coming on strong making me very anxious.


Hey Marcus, I should have traded you my 69 when I had it for sale!! I'm with you these are really coming on strong and look bad ass when built right. Great work guys :king:

[SWAPMEETCRAZY]

Hey Marcus, I should have traded you my 69 when I had it for sale!! I'm with you these are really coming on strong and look bad ass when built right. Great work guys :king:

Hey Rick,,if your not already, come on over to the 67-72chevytrucks.com forums....lot a fun over there..I flip between there and here all the time......jim

[Ketzer]

It's only because the piece is not finished yet. The step was to deep to do it on the bead roller so they are being made separate and then being welded in. Finished photos will be posted later today.

Thanks for sharing that! A few of us have no idea how you do the magic on some of those tricky corners and pieces! I know you can't stop to show every single step so really THANKS for the pics you post!! :hail:



Jeff-

[FaBrycation]

Thanks for sharing that! A few of us have no idea how you do the magic on some of those tricky corners and pieces! I know you can't stop to show every single step so really THANKS for the pics you post!! :hail:



Jeff-

No problem I know how most of you wanna see the details so I try to post as much as I can

[Rick D]

Hey Rick,,if your not already, come on over to the 67-72chevytrucks.com forums....lot a fun over there..I flip between there and here all the time......jim

Hey Jim, before I bought my current car I was looking for a C10 and signed up over there. I've lurked a lot but have not posted, I keep looking for a C10 but I want a short bed with a nice patina :whistling: I know just like everyone else does!!! Lol

[SWAPMEETCRAZY]

Hey Jim, before I bought my current car I was looking for a C10 and signed up over there. I've lurked a lot but have not posted, I keep looking for a C10 but I want a short bed with a nice patina :whistling: I know just like everyone else does!!! Lol

While were givin Brycen the weekend to recover Rick, I'll let u get the fever with this one ......slammed, Camaro handles ....and fixin to have some of Brycen's cowl panel work and maybe that rear cab roof panel....but i'll have to do the labor here!!.....I'm with the other guys on the pics Brycen....we are inspired!!................jim

[FaBrycation]

While were givin Brycen the weekend to recover Rick, I'll let u get the fever with this one ......slammed, Camaro handles ....and fixin to have some of Brycen's cowl panel work and maybe that rear cab roof panel....but i'll have to do the labor here!!.....I'm with the other guys on the pics Brycen....we are inspired!!................jim

Thanks guys, we take a lot of pride in our work and are happy to share it with those who appreciate it.

Just glad we have the means to do what we love.

[tech@scotts]

Tad bit of a delay because of the holidays, but here's a few more shots.

The back is all finished, and now we are getting around to the firewall. Not a whole lot left on the cab.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131210_115455_zps574157b4.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131210_115455_zps574157b4.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131210_115607_zpsbda815aa.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131210_115607_zpsbda815aa.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131210_115534_zps6c3edb05.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131210_115534_zps6c3edb05.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131210_115506_zps4f392ca5.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131210_115506_zps4f392ca5.jpg.html)

[aggie91]

Tuning in to see more. I am with JIm, I bounce between here and the truck site too.

This site is making me want to do a car of some type, just not sure what to build since I have too many that I like.

I really want a 67-72 C10 to complete my "set" of the C10 body styles.

[tech@scotts]

few more for today..

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131211_131542_zps47be011e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131211_131542_zps47be011e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131212_080909_zpse10fe6bb.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131212_080909_zpse10fe6bb.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131212_120622_zpsa40e5aaf.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131212_120622_zpsa40e5aaf.jpg.html)

Justin decided he wanted a cool detail to run the perimeter of the engine bay, so he came up with this belt-line. It will run along the inner fender wells as well as the core support cover.

[syborg tt]

Most people want to win the lottery not me I just want to win this truck.

ps - Great work guys and Brycen it was good talking to you at Sema. What size shirt are you so I can get you one.

[tech@scotts]

Here you can see where the kick panel is moved forward 5 inches. This really makes a difference with leg room.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131213_100157_zpsac19397d.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131213_100157_zpsac19397d.jpg.html)


http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131213_131827_zps85d38edb.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131213_131827_zps85d38edb.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131213_131846_zps258a9c82.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131213_131846_zps258a9c82.jpg.html)

Only thing left now on the firewall is a whole lot of grinding...

[tech@scotts]

Chassis was finished up this week. Finally got around to setting it on.

The Goodguys trailer mandated that the overall height on the truck be no taller than 57". Right now we are sitting at 57.5" Once we chop the truck it will put us right where it needs to be.

Here it is sitting on a set of mock up rims. Enjoy the pics.


http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_070420_zps66564a10.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_070420_zps66564a10.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_070405_zpsedf7cb1e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_070405_zpsedf7cb1e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_070613_zpsff6a723f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_070613_zpsff6a723f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_070635_zps7fa579ad.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_070635_zps7fa579ad.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_070651_zps0dfa4997.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_070651_zps0dfa4997.jpg.html)

[fleetus macmullitz]

Awesome build...look forward to seeing more of the great work from your very talented team there. :thumbsup:

[tech@scotts]

Motor went in today. Although this wheel and tire combo is about an inch shorter than what will be used, this still gives us an idea of how close to the final ride height we are. Right now, 57" to the roof.

We're going to be trimming and redoing the rockers and bed lowers for ground clearance. It'll look great when it's done.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_084517_zps285ec25d.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_084517_zps285ec25d.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_121701_zpse9a7070a.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_121701_zpse9a7070a.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_084452_zpsae2dc394.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_084452_zpsae2dc394.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_104805_zpse2885d11.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_104805_zpse2885d11.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_121451_zpsc66d98b4.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_121451_zpsc66d98b4.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_121503_zpse1403beb.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_121503_zpse1403beb.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_121549_zps20933e22.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_121549_zps20933e22.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20131224_121538_zps0c1d7e8b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20131224_121538_zps0c1d7e8b.jpg.html)

[tech@scotts]

Really like the truck from this angle.

http://i353.photobucket.com/albums/r385/scottshotrods/20131226_135110_RichtoneHDR_zps7337c229.jpg (http://s353.photobucket.com/user/scottshotrods/media/20131226_135110_RichtoneHDR_zps7337c229.jpg.html)

[ccracin]

It's looking really good guys. One question, have you checked the turning radius with the foot area extended? My guess is you have really limited yourself unless you moved the cab on the chassis or moved the spindles forward on your chassis. I would really like to know if this works since I'm taller than average! :D

Again, looks awesome! :thumbsup:

[214Chevy]

......
1.Scotts tube chassis

Looking good! I thought you guys were gonna do a tube chassis? Looks good either way though. :thumbsup:

[Scotts Hotrods]

It's looking really good guys. One question, have you checked the turning radius with the foot area extended? My guess is you have really limited yourself unless you moved the cab on the chassis or moved the spindles forward on your chassis. I would really like to know if this works since I'm taller than average! :D

Again, looks awesome! :thumbsup:

The front wheels at full compression have plenty of room.When the front wheels are turned lock to lock there is plenty of room.The front centerline
of the wheels are moved forward 1 inch from stock.We do this on our c-10
chassis and our c-10 ifs kits.This will center the front wheel into the fender.

[ccracin]

The front wheels at full compression have plenty of room.When the front wheels are turned lock to lock there is plenty of room.The front centerline
of the wheels are moved forward 1 inch from stock.We do this on our c-10
chassis and our c-10 ifs kits.This will center the front wheel into the fender.

Awesome, I figured you guys were on it! Can't wait to see more. Thanks for the reply!

[tech@scotts]

It's looking really good guys. One question, have you checked the turning radius with the foot area extended? My guess is you have really limited yourself unless you moved the cab on the chassis or moved the spindles forward on your chassis. I would really like to know if this works since I'm taller than average! :D

Again, looks awesome! :thumbsup:

I'll shoot a few pictures so you guys can see the frame and firewall clearance. We set them up with the wheels set forward 1". As it sits right now, there is a ton of room between the firewall and wheels. I think the mock ups are about 3" shorter than the actual wheels/tires being used, but even with that, there's plenty of room.

[tech@scotts]

Looking good! I thought you guys were gonna do a tube chassis? Looks good either way though. :thumbsup:

I guess it just depends on what the definition of tube chassis is. We build some chassis's with round tubing, and build some with square tubing. We wanted our typical "off the shelf" chassis under this one to represent what would be typical if someone were to call an order one. I have a few round chassis cars I'll take a few pics of for you guys. They do look pretty cool.

[tech@scotts]

Right now the guys are setting up the ground clearance. The rockers are being trimmed and remade, ad the rear of the cab is being redone too.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1380_zpsc7586179.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1380_zpsc7586179.jpg.html)

You can see just how much we are taking out of the rocker. Seems like a lot, but it'll really not be noticeable when it's all finished.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1382_zpsa9e217f1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1382_zpsa9e217f1.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1383_zps0e5927f5.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1383_zps0e5927f5.jpg.html)

[tech@scotts]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140102_131513_RichtoneHDR_zps7dcb404f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140102_131513_RichtoneHDR_zps7dcb404f.jpg.html)

The body will sit level with the frame when it's finished. All said and done, it will give us our 4" of ground clearance that we need.

Here's a better view of the rocker. It'll be finished with a sheet metal cap and shaped correctly.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1394_zps2ddb2581.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1394_zps2ddb2581.jpg.html)

[syborg tt]

I can't wait to see this one finished.

[tech@scotts]

Not the best of pics cause the cars pretty low on the ground, but here's a pretty much finished rocker.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140103_153813_zps6bf19c71.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140103_153813_zps6bf19c71.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140103_153804_zps509cf0f1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140103_153804_zps509cf0f1.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140103_1524491_zps83d409b4.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140103_1524491_zps83d409b4.jpg.html)

[tech@scotts]

Well, the roof's off :)

http://i353.photobucket.com/albums/r385/scottshotrods/20140106_100056_zps76985bf8.jpg (http://s353.photobucket.com/user/scottshotrods/media/20140106_100056_zps76985bf8.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/20140106_100130_zps3f868e77.jpg (http://s353.photobucket.com/user/scottshotrods/media/20140106_100130_zps3f868e77.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/20140106_100144_zpsda4ab56b.jpg (http://s353.photobucket.com/user/scottshotrods/media/20140106_100144_zpsda4ab56b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/20140106_100212_zpsb87e836a.jpg (http://s353.photobucket.com/user/scottshotrods/media/20140106_100212_zpsb87e836a.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/20140106_124041_zps1c123c80.jpg (http://s353.photobucket.com/user/scottshotrods/media/20140106_124041_zps1c123c80.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/20140106_124041_zps1c123c80.jpg (http://s353.photobucket.com/user/scottshotrods/media/20140106_124041_zps1c123c80.jpg.html)

[Z06Joe]

Absolutely love this style truck!!!! This is gonna be a bad ass build for sure!!! Gotta keep my eye out to win this!!!!

[tech@scotts]

Here's a quick look at it before it's finished. You can see how the rear window stays full size, and how the windshield is leaned back. The dash isn't affected so long as the pillars are relieved correctly. Getting close...

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140107_083216_zpsd8af2b55.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140107_083216_zpsd8af2b55.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140107_083150_zps2ca41ab1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140107_083150_zps2ca41ab1.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140107_083131_zpse7f14ac6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140107_083131_zpse7f14ac6.jpg.html)

[syborg tt]

Man I hope I win this truck !!!

:king:

[GrabberGT]

Man I hope I win this truck !!!

:king:

Not gonna happen. This one is mine! :bigun2:

Killer work you guys are doing on this.

[fleetus macmullitz]

Awesome. :thumbsup:

[tech@scotts]

In total, the windshield is laid back 2-3/4" and the total chop is 1-3/4". In the earlier pictures the windshield wasn't fully laid back yet. Here's the final height.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140108_083143_zps050c37c0.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140108_083143_zps050c37c0.jpg.html)

Once the welding and cutting started to happen, it was apparent that some more rust repair needed to be done. Since that was happening anyhow, Justin decided to take out the hard edge and smooth it out a bit.

Here's some more pictures.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140108_083222_zpsff42db1e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140108_083222_zpsff42db1e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140108_132838_zps2146a77f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140108_132838_zps2146a77f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140108_132925_zpse26cf9a3.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140108_132925_zpse26cf9a3.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140108_132934_zpsdc01674e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140108_132934_zpsdc01674e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140108_132911_zpsaf00da8f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140108_132911_zpsaf00da8f.jpg.html)

[tech@scotts]

Here's a few good shots of the improved transition. The corners will be reshaped along with the doors to follow the new body line.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140109_091940_zps8258feae.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140109_091940_zps8258feae.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140109_091951_zpsb16b33ed.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140109_091951_zpsb16b33ed.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140109_112914_zps262ec0db.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140109_112914_zps262ec0db.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140109_113013_zps03b5bb28.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140109_113013_zps03b5bb28.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140109_135500_zps24015e7b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140109_135500_zps24015e7b.jpg.html)

[streetbird]

very nice work, this truck will be very nice

[tech@scotts]

Here's a few more for today.

The doors are being fitted as well as a quick mock up of the front sheet metal. The metal work on the fenders placed the core support a little too far back, so we'll fix that and it should be good to start raising the wheel wells a bit.

I really like the core support. It mocked up really nice and will give the truck a clean look.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1486_zps1e1ef894.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1486_zps1e1ef894.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1479_zps1c0604e7.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1479_zps1c0604e7.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_083721_zps750a8228.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_083721_zps750a8228.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140110_114548_zps210b5ec5.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140110_114548_zps210b5ec5.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140110_114633_zpsde314b9e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140110_114633_zpsde314b9e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1478_zps9f1971e8.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1478_zps9f1971e8.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1475_zps5e625d56.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1475_zps5e625d56.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_095148_zpsbb15fc6c.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_095148_zpsbb15fc6c.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_095140_zps76b47858.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_095140_zps76b47858.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_103001_zpsbb4e66ce.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_103001_zpsbb4e66ce.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_103012_zps1e3e66c9.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_103012_zps1e3e66c9.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_111824_zpsa416ee6b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_111824_zpsa416ee6b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_111723_zps89388dd2.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_111723_zps89388dd2.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140113_112148_zpsfe0d0f10.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140113_112148_zpsfe0d0f10.jpg.html)

[RodZZilla]

Nice core support. It is all cool.

[tech@scotts]

Doors are moving along nicely...

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140114_141101_zps414fef97.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140114_141101_zps414fef97.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140114_141129_zpsefb3723d.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140114_141129_zpsefb3723d.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140114_140844_zpsf7d46e26.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140114_140844_zpsf7d46e26.jpg.html)

[Scotts Hotrods]

You can see in the pic that the top corner on the door is rounded off from the factory square corner that comes on these doors stock.This adds a nice look when the drip rail is removed

Justin

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140114_140844_zpsf7d46e26.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140114_140844_zpsf7d46e26.jpg.html)


for those of you that are thinking it. It is the shadow of the lip on the pillar that make the gap look uneven although it is the same.

[preston]

When you do the final TIG welding on something like that windshield header, how long is your average pull ? Judging by the HAZ it looks like you only go about 1-2" at a time. Is that about right ? Just fill in between a tack or two ?

[Royalworks]

Oh man. I have my truck sitting outside my shop and wanna build it so bad now. This truck is sick

[GAP Industries]

Awesome build guys

[FaBrycation]

When you do the final TIG welding on something like that windshield header, how long is your average pull ? Judging by the HAZ it looks like you only go about 1-2" at a time. Is that about right ? Just fill in between a tack or two ?

On a piece like that, I actually get it tacked about every 1/2 - 5/8 of an inch. This helps it retain is shape through the welding process. And then when I weld it I try to count out the number of times I add rod to the weld then stop and cool it. I typically count to 6 on detailed piece like this one which equals about a 1/2 - 5/8.
With that being said I don't necessarily stick to going tack to tack as sometimes that is to long of a pass. I mainly try to have short and very consistent heat affect zones, as this keeps the warping and pulling to a minimum and makes for a easier time metal finishing.
Also, if the piece is cut in correctly and you have near zero gap as I do that drastically reduces warping along with my welding process.

OK I'll stop

[tech@scotts]

The drivers side is coming along nicely..

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140115_143027_zps5aa9a8ef.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140115_143027_zps5aa9a8ef.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140115_143107_zps9444add6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140115_143107_zps9444add6.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140115_150824_zpse9acdfdc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140115_150824_zpse9acdfdc.jpg.html)

The rear peak is being removed and our roof kit is being installed.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140116_094441_zps875ef536.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140116_094441_zps875ef536.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140116_104036_zps14f0b0f6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140116_104036_zps14f0b0f6.jpg.html)

[tech@scotts]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140116_125015_zps390c9858.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140116_125015_zps390c9858.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140116_125024_zps2b1c27c0.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140116_125024_zps2b1c27c0.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140116_125043_zps6f84e069.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140116_125043_zps6f84e069.jpg.html)

The last picture gives you a good idea of just how much peak get's removed.

[Hotrod1]

DO you just spot every inch, grind, and then good to go or do you spot the entire seem? Thanks

[tech@scotts]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140117_103941_zps23da3eff.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140117_103941_zps23da3eff.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140117_103945_zpsb36033da.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140117_103945_zpsb36033da.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140117_104027_zps22b44ab6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140117_104027_zps22b44ab6.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140117_104038_zpsbcee2e30.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140117_104038_zpsbcee2e30.jpg.html)

[tech@scotts]

A few more pics for today. You can see how the inside of the door jamb is now finished with the channel being flushed out and smooth now. Gives it a much cleaner look.
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1656_zpsae9164ac.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1656_zpsae9164ac.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1653_zpsf79d92b1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1653_zpsf79d92b1.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1652_zpsed246b20.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1652_zpsed246b20.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1650_zpsd3e2950f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1650_zpsd3e2950f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1649_zps2969fdae.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1649_zps2969fdae.jpg.html)

[Bakaruda]

Can't wait to see it, man you guys do great work.

[tech@scotts]

The truck is in between a few other projects so getting a decent side shot is tough until I can roll it forward. Here's a couple shots of the bed on though.

It's still in pieces. We had to take at all apart in order to raise the floor up and still preserve the stock wheel wells. Rather than make new ones, we'll widen the stock ones so it has a somewhat factory look.

Just for reference, the wheels that are on there are just for mock up. The new ones will have the correct backspacing and width so they sit a lot further out. THe ones on there now look silly...

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140124_084324_zps529859f5.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140124_084324_zps529859f5.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140124_084259_zps454aeb7b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140124_084259_zps454aeb7b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140124_084350_zps56da6d50.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140124_084350_zps56da6d50.jpg.html)

[214Chevy]

Looking good! Are y'all shaving the stake pockets too?

[Scotts Hotrods]

The stake pockets will be shaved on the bed

Justin

[tech@scotts]

Working on the bed now. I'll shoot a few pics of the modded factory tubs as soon as they're finished.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140128_144725_zps5ba32b6b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140128_144725_zps5ba32b6b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00610_zpsd961ea50.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00610_zpsd961ea50.jpg.html)

[tech@scotts]

There was a lot of work in fitting and assembling the bed, so rather than bore you all with mundane pictures of that, I figured 'd wait until some cool work was done.

Here's a few shots of the wheel tubs that were widened and a few of how we raised the wheel opening on the bed. IMHO raising the lip makes the biggest difference when the trucks are this low. It really gives it the right proportions when contrasted with the rear wheels.

Anyhow, enjoy the pics.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00635_zpsb0f8bfbd.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00635_zpsb0f8bfbd.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00643_zpsc73ccf3f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00643_zpsc73ccf3f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00675_zpsab646740.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00675_zpsab646740.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1852_zps7b22cefc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1852_zps7b22cefc.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1853_zps2df150ba.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1853_zps2df150ba.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1856_zps8c38ffd2.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1856_zps8c38ffd2.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1857_zps43a324b2.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1857_zps43a324b2.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1858_zps268f1213.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1858_zps268f1213.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_1861_zps69fa8675.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_1861_zps69fa8675.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00701_zps5df4b09c.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00701_zps5df4b09c.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00702_zpsa5280f12.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00702_zpsa5280f12.jpg.html)

[fleetus macmullitz]

Amazing work. :cool:

[tech@scotts]

Man, this flu has kicked my butt. I come back, and all the wheel well openings are a lot higher that they were when I left, LOL..

Here's a few pics.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140220_142637_zps185594fc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140220_142637_zps185594fc.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140220_142616_zps31ed1ecf.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140220_142616_zps31ed1ecf.jpg.html)

[tech@scotts]

Here's a good view that show's the profile a little better now.
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140221_070917_zps841a50b2.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140221_070917_zps841a50b2.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00788_zps8cd55ec4.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00788_zps8cd55ec4.jpg.html)

[Ed.Capen]

You guys are doing a killer job on this truck, can't wait to Columbus when it will be seen for the first time.

Goodguys is also doing a tour to TX the end so September and it looks like I will be driving this very truck on that tour! Come join the fun of driving your ride along with me and 50 other cool rides. :mock:

Goodguy Ed.

[tech@scotts]

Starting to look more like a truck now. I really like the headlight choice.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140224_082020_zpsb38bad4b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140224_082020_zpsb38bad4b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140224_082009_zps08fb1290.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140224_082009_zps08fb1290.jpg.html)

[tech@scotts]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00794_zps3d6a2215.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00794_zps3d6a2215.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00793_zps26a0305b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00793_zps26a0305b.jpg.html)

[tech@scotts]

Here's a bit better view of the wheel tucked. Mind you, the back is up off the ground, but this is pretty close to the correct tuck.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00816_zps05644d9b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00816_zps05644d9b.jpg.html)

Here's Wilwood's new caliper. This ( I believe) is the style that will replace the W4A and W6A calipers. I love the grey...

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00812_zps94a0ea9a.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00812_zps94a0ea9a.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00814_zps477f4554.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00814_zps477f4554.jpg.html)

[214Chevy]

Looking good....love the salt flat style wheels.

[tech@scotts]

Looking good....love the salt flat style wheels.

Me too. It's a great wheel choice. They'll really look nice once a little paint is on the truck.

[tech@scotts]

Bed floor is coming along nice.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00853_zps4ff0b288.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00853_zps4ff0b288.jpg.html)

[Ketzer]

Just so I'm clear... this is a giveaway truck ?!?

Incredible build.:bow: :bow:


Jeff-

[tech@scotts]

Just so I'm clear... this is a giveaway truck ?!?

Incredible build.:bow: :bow:


Jeff-

Sure is! Just wish I could enter to win it, LOL!

[tech@scotts]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00881_zpsfc7aaddc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00881_zpsfc7aaddc.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00882_zpscdd07afc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00882_zpscdd07afc.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00883_zpsc0f26a90.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00883_zpsc0f26a90.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00866_zpse159beab.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00866_zpse159beab.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00864_zps0395e1d9.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00864_zps0395e1d9.jpg.html)

[tech@scotts]

Still working on the details for the rear bumper, but so far the roll pan is on and looks great. It's hard to get a good shot of it, but you know what they look like. LOL

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00908_zps04f0ef17.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00908_zps04f0ef17.jpg.html)

[waynieZ]

Jeff its looking great!

[fleetus macmullitz]

Jeff its looking great!

X2. :thumbsup:

[FaBrycation]

It's coming along nicely, the bed will be ready for paint prep next week. It's getting close.

[tech@scotts]

Here's an update for today.

Been doing a lot of work on the bed, so I figured I'd wait till it was mostly done. I have a bunch more I'll upload in the a.m.

Enjoy

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2446_zps9cceca2e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2446_zps9cceca2e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2448_zps5f5d7c5b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2448_zps5f5d7c5b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2449_zps16238709.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2449_zps16238709.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2450_zps8b9adc6d.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2450_zps8b9adc6d.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2451_zpsced7d55f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2451_zpsced7d55f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2452_zps04c6592a.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2452_zps04c6592a.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2453_zpsbee4764e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2453_zpsbee4764e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2454_zpsa91a1958.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2454_zpsa91a1958.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2455_zps1bb1fc13.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2455_zps1bb1fc13.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2457_zpsfd3899ee.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2457_zpsfd3899ee.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2458_zps5c4a799e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2458_zps5c4a799e.jpg.html)

[syborg tt]

That looks very nice

[E.rodz]

Wow I just love what you guys have done with all the metal work! can't wait to see some paint on it You guys do some great work keep inspiring us!:D

[tech@scotts]

Since the rockers and the bed bottoms were all moved, there was a lot of work on all the bed details. Here's a few pics.

Here is before:
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00935_zps3ea20e3e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00935_zps3ea20e3e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00932_zps75e735c4.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00932_zps75e735c4.jpg.html)

and after:
http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140314_162811_zpscae2724b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140314_162811_zpscae2724b.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140314_162825_zpsf840a8b1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140314_162825_zpsf840a8b1.jpg.html)

[syborg tt]

This last group of pictures brings back memories of my old truck.

ps I am still planning on winning this truck

[Stovebolter]

This last group of pictures brings back memories of my old truck.

ps I am still planning on winning this truck

Same here Marty! Looks great guys. 👍

David

[tech@scotts]

The taillights from Marquez showed up on Friday and we were anxious to get them in. They look great, just took a bit of work to get them in. It was easier to make a filler panel and then re-cut the opening to get the gaps right. In the end though, they're a sweet taillight bezel. The led's aren't here yet, but I'll post some pics when they get in.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2725_zps3c64593f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2725_zps3c64593f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_2726_zps9c0c6f57.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_2726_zps9c0c6f57.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140325_074131_zpsf22f650b.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140325_074131_zpsf22f650b.jpg.html)

We also made a filler panel to take up the gap in the bed and tailgate. The panel unbolts so the tailgate can be removed. It's a little detail that won't really be seen, but it creates a nice look, so it's worth doing.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140325_074146_zps921e8016.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140325_074146_zps921e8016.jpg.html)

[fleetus macmullitz]

The winner will be thrilled for sure. :thumbsup:

[Z06Joe]

BAD ASS for sure!!! Did I miss on how to enter to win it???

[tech@scotts]

BAD ASS for sure!!! Did I miss on how to enter to win it???

IIRC, You have to either be a member of Goodguys, or you have to enter a car in at one of their events.

[tech@scotts]

The interior is starting to be put back together.

We removed all of the inner sheet metal part sin order to make sure there was zero rust hiding. Good thing we did too, because there was a ton. Now it's time for it to all be put back in, as well as a new trans and driveshaft tunnel.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140331_105515_zps8eedebf5.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140331_105515_zps8eedebf5.jpg.html)

Because the corner pillars were pied, there's going to be just a tab bit of massaging to get the inner panel to line back up. Not much though.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140331_105436_zpsec408ca1.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140331_105436_zpsec408ca1.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140331_105355_zpsa7acb2db.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140331_105355_zpsa7acb2db.jpg.html)

Since this truck sits so low, the trans and driveshaft tunnel are going to be more car like, than truck like.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00974_zpsc87ebfc5.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00974_zpsc87ebfc5.jpg.html)

We also wanted to make sure there was plenty of room around the trans to work on it. We all assume the winner of this truck is going to drive it likes it's meant to be, so at some point, it'll need some kind of service. Nothing worse that trying work on a show vehicle that's not built to be worked on. There's ample hand room in there.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140331_105456_zpsba50bc47.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140331_105456_zpsba50bc47.jpg.html)

[garickman]

Amazing fabrication! You've taken C10's to a whole new level. With the roof modifications, I guess you have to have the door glass custom made?

[tech@scotts]

Amazing fabrication! You've taken C10's to a whole new level. With the roof modifications, I guess you have to have the door glass custom made?

Not so much custom glass, as much as just a little shaving and polishing. With this chop, all the factory glass can be used. Makes it much easier.

[tech@scotts]

Since the truck is getting pulled apart at this stage for paint and what not, The guys rolled it outside. This was the last time for me to see the truck or take any pics of it in bare metal.
The final ride height is still not set, but it's pretty close at this point. Just a little bit of leveling and setting the stance now.

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00982_zps551b3891.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00982_zps551b3891.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00984_zps64cb8b59.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00984_zps64cb8b59.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00986_zpsec183455.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00986_zpsec183455.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00987_zps186a0f93.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00987_zps186a0f93.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00989_zps8ebc6779.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00989_zps8ebc6779.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00991_zpsac606843.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00991_zpsac606843.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/DSC00999_zps5eccc127.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/DSC00999_zps5eccc127.jpg.html)

[jy211]

tight work! :thumbsup:

[syborg tt]

Very nice. I love the stance

[Jr]

WOW! Fantastic stance. Truck looks sweet.

Any more info on that tonnue cover? Looks good.

[Evan Iroc-Z]

What a beautiful truck! I cannot wait to see it finished.

[Ed.Capen]

What a beautiful truck! I cannot wait to see it finished.

Evan, Come to the Goodguys event in Columbus OH to see it as it will debut there on Saturday night. This will also be the truck used to lead the tour from Pleasanton CA to Fort Worth TX on September 25th. Come along on the tour if you like.
Goodguy Ed

[Evan Iroc-Z]

I may just have to try and plan a mini vacation. This truck alone would make it worthwhile.

[FaBrycation]

Just a few recent upgrades. http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140415_150316_zpsuczev9o_edit_1398256384211_ zpsuodpzliu.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140415_150316_zpsuczev9o_edit_1398256384211_ zpsuodpzliu.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140415_150234_zpsjqivimu6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140415_150234_zpsjqivimu6.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173223_zpswmvwdyx7.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173223_zpswmvwdyx7.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173231_zpstm72zq3i.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173231_zpstm72zq3i.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173255_zpsicwryfut.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173255_zpsicwryfut.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173347_zpskumjk5ip.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173347_zpskumjk5ip.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173424_zpsq3ifcazw.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173424_zpsq3ifcazw.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173118_zpsppavxuwa.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140418_173118_zpsppavxuwa.jpg.html)

[syborg tt]

Very Very Nice

[FaBrycation]

Thanks Marty, glad to see that someone appreciates it!

[syborg tt]

Thanks Marty, glad to see that someone appreciates it!

I really think there are a lot of people that like it but they are just being quiet because they are in awe !!!

[65 347]

I really think there are a lot of people that like it but they are just being quiet because they are in awe !!!
:snapout:
The work on the truck is awesome! Can't wait to see what you come up with next.

Mike

[ccracin]

Thanks Marty, glad to see that someone appreciates it!

Don't worry, you definitely have some fans! Great work. Can't wait to see it in Columbus!

[FaBrycation]

Looking forward to Columbus a lot! Enjoy these! http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140421_150610_zps9n1jgedm.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140421_150610_zps9n1jgedm.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140421_184441_zpssmldysnk.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140421_184441_zpssmldysnk.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140422_100229_zpswyzxqfek.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140422_100229_zpswyzxqfek.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_125201_zpsd5tpbqlu.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_125201_zpsd5tpbqlu.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_183202_zpsycgshmz7.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_183202_zpsycgshmz7.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_183220_zps5frchcli.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_183220_zps5frchcli.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_183230_zpsq40ni3gl.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_183230_zpsq40ni3gl.jpg.html)

[FaBrycation]

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_125150_zpsr8h52ill.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_125150_zpsr8h52ill.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_125120_zps9c62csou.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_125120_zps9c62csou.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/IMG_20140422_125042_zpsnksldqc9.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/IMG_20140422_125042_zpsnksldqc9.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140422_180324_zpssolrdon2.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140422_180324_zpssolrdon2.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140423_184624_zps5hxo5lsh.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140423_184624_zps5hxo5lsh.jpg.html)

[Evan Iroc-Z]

Thanks Marty, glad to see that someone appreciates it!

It's alright, I guess. You know, if you are into that type of thing. :lol:

[revmopar]

Looks great, awesome work

[rjsjea]

Nice fab for sure....

[Ron in SoCal]

Looks fantastic! Where are you plnning on putting the coils?

[FaBrycation]

Here is the last pictures before it left for paint at Palmer's Customs on friday morning. http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_183034_zpsmaqsdxmc.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_183034_zpsmaqsdxmc.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_183042_zpszw4twlqh.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_183042_zpszw4twlqh.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_183051_zpsib7gsycb.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_183051_zpsib7gsycb.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_185756_zpslhnleg4l.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_185756_zpslhnleg4l.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_185807_zpsfmn9oirb.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_185807_zpsfmn9oirb.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_185815_zpsm66b3quv.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_185815_zpsm66b3quv.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140424_200244_zpskowmd0fl.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140424_200244_zpskowmd0fl.jpg.html)

[FaBrycation]

More... http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140425_062020_zpsgqoxqpaq.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140425_062020_zpsgqoxqpaq.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140425_062026_zpsj9zvf6s6.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140425_062026_zpsj9zvf6s6.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140425_093705_zpsphqoflky.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140425_093705_zpsphqoflky.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140425_093714_zpsnprkstuv.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140425_093714_zpsnprkstuv.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140425_093721_zpsxjpg1zev.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140425_093721_zpsxjpg1zev.jpg.html) http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140425_095245_zpsqpgxykfm.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140425_095245_zpsqpgxykfm.jpg.html)

[67zo6Camaro]

Love your sheet metal work Brycen.

[WSSix]

Looks great, Brycen. Very clean and smooth engine bay. Good job!

[aggie91]

Awsome sheetmetal work on the inner fenders. Overall I realy dig this truck.

The only thing I have seen so far that looks wrong/odd/out of place is the hood hinges. To me they look like an after thought mounted so far from the fenders on that smooth firewall. I know that Porterbuilt is a "competing" shop in the industry, but their hood hinges would have been a cleaner looking solution for this truck. Again, not trying to take anything away from this awsome build, it just does not look right IMHO...

[FaBrycation]

Awsome sheetmetal work on the inner fenders. Overall I realy dig this truck.

The only thing I have seen so far that looks wrong/odd/out of place is the hood hinges. To me they look like an after thought mounted so far from the fenders on that smooth firewall. I know that Porterbuilt is a "competing" shop in the industry, but their hood hinges would have been a cleaner looking solution for this truck. Again, not trying to take anything away from this awsome build, it just does not look right IMHO...

Glad you like most of it. We have used the porterbuilt hinges before. They are alright but when it was time to do the hood hinges we decided on a set of 55-56 chevy car hinges as they are smaller than the C10 hinges but still allow good functional movement for the hood without interrupting or cutting into the firewall. the firewall mount that you see in these pictures is not 100% finished and will get some more style before it's all said and done. We are happy with the way they turned out and if you get to see it in person we think that you will agree. If you don't then that's OK too. That's what makes every build unique. :goodguys: :lateral:

[FaBrycation]

Love your sheet metal work Brycen.

Looks great, Brycen. Very clean and smooth engine bay. Good job!

Thanks guys, I don't get all of the credit though. My friend Kody has his hand in it as well as some design ideas from Justin. And I'm blessed to work in a shop with the tools and the means to build this truck.

[tech@scotts]

Here's a few updates:

Frame made its way back from powder coat last week. We got the exhaust finished and had it coated at Jet-Hot. Turned out great and the coating really makes the clamps stand out. We got the motor and drive shaft installed and pretty much anything else that we could before sticking the cab on it.
Palmers Custom's finished up the cab in record time and it turned out bitchin. It's hard to get a true picture of the color, but the blue on this cab is awesome.
Here's a few pics..

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/4_zpsab4c6682.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/4_zpsab4c6682.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/3_zps141c317c.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/3_zps141c317c.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/1_zpsba0daeef.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/1_zpsba0daeef.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/2_zps14e542ae.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/2_zps14e542ae.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140523_100559_RichtoneHDR_zps05a6768f.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140523_100559_RichtoneHDR_zps05a6768f.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140523_100623_RichtoneHDR_zpsf618cc42.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140523_100623_RichtoneHDR_zpsf618cc42.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140523_100633_RichtoneHDR_zps3822b725.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140523_100633_RichtoneHDR_zps3822b725.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140523_100655_RichtoneHDR_zps86705b2e.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140523_100655_RichtoneHDR_zps86705b2e.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140523_100707_RichtoneHDR_zpsda6e5099.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140523_100707_RichtoneHDR_zpsda6e5099.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/20140523_141617_RichtoneHDR_zps194b4f36.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/20140523_141617_RichtoneHDR_zps194b4f36.jpg.html)

[syborg tt]

Incredible !!!

[tech@scotts]

The color is completely different outside...

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/29_zps25490ff9.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/29_zps25490ff9.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/30_zps4070e8ee.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/30_zps4070e8ee.jpg.html)

http://i353.photobucket.com/albums/r385/scottshotrods/Build%20Ups/GoodGuys%20C-10/31_zps5a4612fd.jpg (http://s353.photobucket.com/user/scottshotrods/media/Build%20Ups/GoodGuys%20C-10/31_zps5a4612fd.jpg.html)

[Ron in SoCal]

You guys nailed it Jeff :thumbsup:

[CamaroMike]

The only thing that could make this truck better is me in the drivers seat :)

[jy211]

color reminds me of indigo blue chevy had used

[214Chevy]

Yes....that blue is awesome.:flashie: :flashie:

[65 347]

WOW, the color is perfect!

[WSSix]

Looking great, guys!

[Ed.Capen]

Here at Goodguys we are very excited to see this truck in person at the Debut in Columbus on July 12th. To make this event huge for Scotts Hot Rods, Palmers Customs and Ron Mangus we are not going to show any more up dates.

We hope that you can join us for the unveiling of the Goodguy G-10 at Columbus OH.

If not we will post more pictures when it is finished.

The plans for the truck is to drive it on the tour from Pleasanton CA to Fort Worth TX the end of September. If you would like to join the tour please go to the Goodguys web site for more information.

Thanks Goodguy Ed

[DBasher]

That blue looks great out in the sun light! Any completed pictures from this weekend?

Dan

[FaBrycation]

Getting ready to board a plane to LA now. But I assure you that there will be plenty of pictures post on here by myself and Scott's Hotrods tomorrow.

Ps. And mountain dew.

[FaBrycation]

Here is one for the night. Enjoy!
http://i205.photobucket.com/albums/bb198/1sick4dr/20140712_2039100.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140712_2039100.jpg.html)

[FaBrycation]

Ok a few more.
http://i205.photobucket.com/albums/bb198/1sick4dr/IMG_20140712_192753.jpg (http://s205.photobucket.com/user/1sick4dr/media/IMG_20140712_192753.jpg.html)

http://i205.photobucket.com/albums/bb198/1sick4dr/IMG_20140712_192840.jpg (http://s205.photobucket.com/user/1sick4dr/media/IMG_20140712_192840.jpg.html)

[syborg tt]

Simply Awesome Looking !!!!

[Vince@Meanstreets]

incredible....im not a truck fan but that one came out great.

[Gas Huffer]

excellent fab work! Truck came out top notch for sure!:yes:

[WSSix]

Looks great! Love the dark blue with the gold line tires. Good job, guys!

[FaBrycation]

Well here are some more shots for every. It was great to meet some of you guys out there this weekend! Goodguys has made this project fun and we hope you all enjoy it as much as they do.
http://i205.photobucket.com/albums/bb198/1sick4dr/20140713_141400.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140713_141400.jpg.html)http://i205.photobucket.com/albums/bb198/1sick4dr/20140713_141144.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140713_141144.jpg.html) http://i205.photobucket.com/albums/bb198/1sick4dr/20140713_140935.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140713_140935.jpg.html) http://i205.photobucket.com/albums/bb198/1sick4dr/20140713_153315_5.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140713_153315_5.jpg.html) http://i205.photobucket.com/albums/bb198/1sick4dr/20140712_184153.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140712_184153.jpg.html) http://i205.photobucket.com/albums/bb198/1sick4dr/20140712_184638_4.jpg (http://s205.photobucket.com/user/1sick4dr/media/20140712_184638_4.jpg.html)

[ccracin]

Brycen,

It was Great BS'ing with you in Columbus. The truck turned out fantastic. Great work. Thanks for taking time to answer all the questions.

It was also a pleasure meeting Justin for the first time. You can certainly tell he is passionate about the work you guys are doing at the shop. Please forward my thanks to him for taking the time to talk as well.

Keep up the great work!

[syborg tt]

Truck turned out incredible. Sorry I didn't get to see it in person just ran out of time and had to be home. But the good news is I did meet your Dad or a man claiming to be your dad and he was pretty darn proud of you. As all of us are I am sure.

ps not do some back posting and show us the assmebly pics I know you took a bunch.

[FaBrycation]

Brycen,

It was Great BS'ing with you in Columbus. The truck turned out fantastic. Great work. Thanks for taking time to answer all the questions.

It was also a pleasure meeting Justin for the first time. You can certainly tell he is passionate about the work you guys are doing at the shop. Please forward my thanks to him for taking the time to talk as well.

Keep up the great work!


thanks! I enjoyed meeting you and sharing all of the details of this truck. it is great to work here at Scott's and for Justin, makes it a lot better when the boss shares equal passion for quality and craftsmanship. glad you liked the truck.




Truck turned out incredible. Sorry I didn't get to see it in person just ran out of time and had to be home. But the good news is I did meet your Dad or a man claiming to be your dad and he was pretty darn proud of you. As all of us are I am sure.

ps not do some back posting and show us the assmebly pics I know you took a bunch.


yeah that is my dad. this truck involved everyone in the shop from top to bottom including him, so be proud of the crew as a whole. I will get some build pics on here in the coming days.

thanks Marty