Forgeline's New One Piece Forged Monoblock Split 5-Spoke SC1 Wheel

[Forgeline Wheel]

Forgeline Motorsports is proud to introduce our latest one piece forged monoblock wheel, the SC1. Shown here in our Transparent Smoke finish, the SC1 is machined from a single 6061-T6 aluminum forging with a concave split 5-spoke design that looks great and delivers the usual performance benefits of a 1pc forged monoblock wheel (i.e., high deflection stiffness, excellent fatigue strength, relatively low mass).

Being a one piece wheel, offsets and backspacing are not quite as flexible as they are with a 3 piece wheel (since we can't just mix and match rim shells). But we have a pretty large offset range available, so with the right axle configuration, we should be able to accommodate most potential pro-touring fitments. It is currently available in 18, 19, and 20-inch diameters with a range of widths and offsets. (Please Note: Depending on size, the SC1 may be available in deep, medium, or shallow concave profiles. See sizing chart for details.) Learn more (including sizes and pricing) at: http://www.forgeline.com/products/one-piece-monoblock/sc1.html

http://i.imgur.com/8PmNlBo.jpg
http://i.imgur.com/bJUeoiU.jpg
http://i.imgur.com/GCWSiGQ.jpg
http://i.imgur.com/OV1Ls33.jpg

[Ron in SoCal]

That's a home run Mark. See you guys at SEMA!

[Rick D]

That's a home run Mark. See you guys at SEMA!

For what another set of wheels?? :poke: sorry I had to :thumbsup:

[Rick D]

Oh and Mark sweet wheels!!! :thumbsup:

[coolwelder62]

Those are Awesome.I hope I can sell a set of those to a customer soon:thumbsup: .

[Forgeline Wheel]

I hope I can sell a set of those to a customer soon:thumbsup: .

Me too!

[Forgeline Wheel]

A few more shots in Satin Black this time.

http://i.imgur.com/Ko8tFN5.jpg
http://i.imgur.com/fUpMM7z.jpg
http://i.imgur.com/nPw0Mtn.jpg
http://i.imgur.com/qjSgQKX.jpg
http://i.imgur.com/HvdwPVf.jpg

[coolwelder62]

Would like to stay Forgeline customer service is 1st.class. I ordered a set of GA3R's For a sub frame customer on wed.Oct.2 got an email today they will be here wed Oct.16Th.Now that's some quick service.:thumbsup: :thumbsup:

[Forgeline Wheel]

Would like to stay Forgeline customer service is 1st.class. I ordered a set of GA3R's For a sub frame customer on wed.Oct.2 got an email today they will be here wed Oct.16Th.Now that's some quick service.:thumbsup: :thumbsup:

Thanks Scott! Of course, it is October. We tend to be a bit quicker in October than we are in June. :)

[syborg tt]

Hi Mark,

It's official. I will be ordering a set of Forgeline's winter for the 2010 Camaro and these may be the wheels.

A few more shots in Satin Black this time.

http://i.imgur.com/Ko8tFN5.jpg
http://i.imgur.com/fUpMM7z.jpg
http://i.imgur.com/nPw0Mtn.jpg
http://i.imgur.com/qjSgQKX.jpg
http://i.imgur.com/HvdwPVf.jpg

[Forgeline Wheel]

Hi Mark,
It's official. I will be ordering a set of Forgeline's winter for the 2010 Camaro and these may be the wheels.

That sound great! Thanks! The SC1 is a beautiful wheel. These photos don't even do it justice. If you order them from Scott at Vintage Racing and Performance in KS, then this thread will have come full circle. :)

[Forgeline Wheel]

Some shots of the one piece forged monoblock SC1 with the Brushed and Cleared finish. FYI, I mentioned a while back that we were expecting some new monoblock forgings to allow us to make some new sizes. Well, some of those forgings are now in stock, so as of this moment, we can now make the 19x8.5 and 20x8.5 sizes in all of the One Piece Forged Monoblock Series wheels.

As always, you can find sizes and pricing at our website. The One Piece Forged Monoblock wheels can be found at: http://www.forgeline.com/products/one-piece-monoblock/

http://i.imgur.com/610oShp.jpg
http://i.imgur.com/knzKH0i.jpg
http://i.imgur.com/KPkyZDL.jpg
http://i.imgur.com/hVI6tbu.jpg