4mm
10-07-2013, 12:20 AM
Brand spanking new Katech LS7 torquer cam kit. This is the kit which includes valve springs and retainers from Katech.
$700 shipped within the CONUS. Paypal ok, been verified for over 9 years.
Info from Katechs website:
"This camshaft was developed by the same engineers that contribute to the factory GM race programs. It was validated on our Optron valvetrain dynamics test cell for superior valve control and durability. You can be confident that when installed in your vehicle, you have a margin of safety far beyond normal operating range."
First, this camshaft was developed by the same engineers that contribute to the factory GM race programs. It was validated on our Optron valvetrain dynamics test cell for superior valve control and durability. You can be confident that when installed in your vehicle, you have a margin of safety far beyond normal operating range.
Second, this camshaft has produced many satisfied customers. It may not be the highest peak horsepower producing camshaft on the market, but it's gobs of torque pin you to the seat and the comfortable drivabilty offers a great balance. After all, if you don't enjoy driving the car it doesn't matter how much horsepower you make.
Third, it's ease of installation. All you need is the cam, springs and titanium retainers and you have a proven package.
This camshaft has satisfied the horsepower needs of other tuners such as:
Halltech
Breathless Performance
Extreme Motorsports
Guldstrand Motorsports
SPECS & PRICING:
Camshaft:
Duration @ .050 - 220/244
Lift - .615/.648
LSA - 110
ICL - 106 (installed straight up)
Price: $500
Springs:
Single beehive
65g
Install height: 1.850
Price: $256/set
Retainers:
Titanium
5.5g
Uses production locks and lash caps
Price: $256/set
Power (STP) Engine Dyno:
600hp 570lb-ft of torque
Sound clips:
http://www.katechengines.com/street_...e_packages.php
FAQ:
What kind of gas mileage will I get?
Near-stock gas mileage...if you can keep your foot out of it
Do you have anything that makes more power than this one?
This is our best street cam for power, torque and drivability. We have tested others, but you make sacrifices in torque and drivability.
How much rwhp will this make?
Depending on whose chassis dyno, we have seen 508-557rwhp
Can I run this without headers?
You could, but you would make less power (-15hp).
Do I need to modify the heads or port?
We have done some ported head combos for customers who use this cam and want every last bit of power possible, but it's not absolutely necessary.
$700 shipped within the CONUS. Paypal ok, been verified for over 9 years.
Info from Katechs website:
"This camshaft was developed by the same engineers that contribute to the factory GM race programs. It was validated on our Optron valvetrain dynamics test cell for superior valve control and durability. You can be confident that when installed in your vehicle, you have a margin of safety far beyond normal operating range."
First, this camshaft was developed by the same engineers that contribute to the factory GM race programs. It was validated on our Optron valvetrain dynamics test cell for superior valve control and durability. You can be confident that when installed in your vehicle, you have a margin of safety far beyond normal operating range.
Second, this camshaft has produced many satisfied customers. It may not be the highest peak horsepower producing camshaft on the market, but it's gobs of torque pin you to the seat and the comfortable drivabilty offers a great balance. After all, if you don't enjoy driving the car it doesn't matter how much horsepower you make.
Third, it's ease of installation. All you need is the cam, springs and titanium retainers and you have a proven package.
This camshaft has satisfied the horsepower needs of other tuners such as:
Halltech
Breathless Performance
Extreme Motorsports
Guldstrand Motorsports
SPECS & PRICING:
Camshaft:
Duration @ .050 - 220/244
Lift - .615/.648
LSA - 110
ICL - 106 (installed straight up)
Price: $500
Springs:
Single beehive
65g
Install height: 1.850
Price: $256/set
Retainers:
Titanium
5.5g
Uses production locks and lash caps
Price: $256/set
Power (STP) Engine Dyno:
600hp 570lb-ft of torque
Sound clips:
http://www.katechengines.com/street_...e_packages.php
FAQ:
What kind of gas mileage will I get?
Near-stock gas mileage...if you can keep your foot out of it
Do you have anything that makes more power than this one?
This is our best street cam for power, torque and drivability. We have tested others, but you make sacrifices in torque and drivability.
How much rwhp will this make?
Depending on whose chassis dyno, we have seen 508-557rwhp
Can I run this without headers?
You could, but you would make less power (-15hp).
Do I need to modify the heads or port?
We have done some ported head combos for customers who use this cam and want every last bit of power possible, but it's not absolutely necessary.