PDA

View Full Version : PSI Conversions LS Harness


ItDoRun
09-27-2013, 10:09 AM
Does anyone have any photos of a first gen Camaro with the PSI harness? I'm curious how the harness lays in the engine compartment and how clean it looks. I need to get my harness ordered next week.

Thanks,

Ron in SoCal
09-27-2013, 10:23 AM
Chris I used PSI and would again. Take a look in my thread (tail end) and you'll see some pics. We did re-wrap it in the engine comaprtment, but no other mods.

Swain
09-27-2013, 01:21 PM
I have the same deal also. I would love to see some pictures.

rickpaw
09-27-2013, 02:15 PM
Here's a picture of PSI harness I used in my swap. I put the ECU behind the pass head lights and ran the main harness from the ECU inside the fender.

http://i616.photobucket.com/albums/tt250/rickpaw/67%20Firebird%20LS%20swap/P1030111_zps4c512046.jpg (http://s616.photobucket.com/user/rickpaw/media/67%20Firebird%20LS%20swap/P1030111_zps4c512046.jpg.html)

ItDoRun
09-27-2013, 02:34 PM
No picture

Here's a picture of PSI harness I used in my swap. I put the ECU behind the pass head lights and ran the main harness from the ECU inside the fender.

http://i616.photobucket.com/albums/tt250/rickpaw/67%20Firebird%20LS%20swap/P1030111_zps4c512046.jpg (http://s616.photobucket.com/user/rickpaw/media/67%20Firebird%20LS%20swap/P1030111_zps4c512046.jpg.html)

Bsinclair
09-27-2013, 08:16 PM
i used a harness made by modern vintage and i'm really happy with how its made.. I mounted my ecu inside the car using a ironworks mount..

hud697
10-07-2013, 09:24 AM
I used the harness from SSP on my dad's '55, i really liked the look of it better than my PSI. It had braided loom on the entire harness

jeremy30thz
10-12-2013, 05:26 PM
i used a harness made by modern vintage and i'm really happy with how its made.. I mounted my ecu inside the car using a ironworks mount..

Looks good man, I will have a very similar setup if I can ever get started on it

mikeextrafast
10-17-2013, 07:44 PM
what location are you guys installing the ecu ?