tino160
09-14-2013, 06:47 PM
My friend is looking to get rid of his 69' project.(I am still working on mine and have not given up yet, LOL!) Its an original v8 stick car and was on its way to be a good pro touring car. Here is a list of whats been done and the parts that come with it.
1. The shell has been acid dipped and E-coated.
2. New full one piece floor pan installed.(will fit a 6spd or auto od)
3. Firewall has been smoothed.(With DSE wiper motor/willwood mast and porp.)
4. TCI front sub frame with tube arms and Willwood 12" 4 piston discs.
5. Complete new steel front cap W/2" steel cowl hood.
6. Good factory doors and a new trunk lid.
That is how the car sits now on the rolling jig/dolly that it comes with. These are some of the parts that come with it.
1. DSE inner/outter mini-tubs.
2. TCI bolt in 4-link w/9" detroit locker 3.70 gear 12" willwoods w/e-break.
3. Also Watts link rear end kit (same as "BAD PENNY") w/9" housing. (your choice of what to put in, they are both 4" shorter than stock total)
4. Complete trunk pan.
5. New quarter panels. ]
6. Classic auto air complete A/C kit.
7. Ricks stainless gas tank setup for in tank pump.
8. Complete Deluxe stock black interior kit (everything unopened)
9. Also 2004' gto interior black (seats dash and console) (Your choice of what interior to use)
10. EMS billet hood hinges.
11. The orig 350 and 4spd that was in the car when he bought it.
I know there are a lot of other parts that will go with it. We will pull it out the garage tomorrow to get some better pictures and see what other parts will go. He has almost $30k in it now as it sits with all the parts and body work. He will take $14k for everything.(If I was not building one already I would get it) The car is at a point now that its new owner can choose the direction to take it and sell off the parts(rear end/suspension and interior) not used to get a few bucks back.The car is located just outside of New Orleans. Send me a PM if you want to take a look.I will try to get some better pictures up tomorrow afternoon, Thanks.
1. The shell has been acid dipped and E-coated.
2. New full one piece floor pan installed.(will fit a 6spd or auto od)
3. Firewall has been smoothed.(With DSE wiper motor/willwood mast and porp.)
4. TCI front sub frame with tube arms and Willwood 12" 4 piston discs.
5. Complete new steel front cap W/2" steel cowl hood.
6. Good factory doors and a new trunk lid.
That is how the car sits now on the rolling jig/dolly that it comes with. These are some of the parts that come with it.
1. DSE inner/outter mini-tubs.
2. TCI bolt in 4-link w/9" detroit locker 3.70 gear 12" willwoods w/e-break.
3. Also Watts link rear end kit (same as "BAD PENNY") w/9" housing. (your choice of what to put in, they are both 4" shorter than stock total)
4. Complete trunk pan.
5. New quarter panels. ]
6. Classic auto air complete A/C kit.
7. Ricks stainless gas tank setup for in tank pump.
8. Complete Deluxe stock black interior kit (everything unopened)
9. Also 2004' gto interior black (seats dash and console) (Your choice of what interior to use)
10. EMS billet hood hinges.
11. The orig 350 and 4spd that was in the car when he bought it.
I know there are a lot of other parts that will go with it. We will pull it out the garage tomorrow to get some better pictures and see what other parts will go. He has almost $30k in it now as it sits with all the parts and body work. He will take $14k for everything.(If I was not building one already I would get it) The car is at a point now that its new owner can choose the direction to take it and sell off the parts(rear end/suspension and interior) not used to get a few bucks back.The car is located just outside of New Orleans. Send me a PM if you want to take a look.I will try to get some better pictures up tomorrow afternoon, Thanks.