2013 Shelby Brembo brakes

[1Bad68Cat]

Hi. I will be installing 2013 Shelby Brembo brakes on my 67 Cougar, but need a couple of dimensions. Does anyone have the dimensions in the picture below for the s197 generation mustang? I need the bolt circle dimension (front view) and the offset from the hub (right view). Thanks in advanced.


Robert

[1Bad68Cat]

Bump. Hopefully someone might have these dimensions. Trying not to purchase a spindle/hub assembly.

[1Bad68Cat]

Just a little update of the bracket I came up with.

[Revved]

Have you tried contacting Brembo to see if they already have a bracket for your setup?

I've done several Baer/Shelby setups on 67 Mustangs and your bracket looks awfully familiar.... really just going to be a few .001 here and there depending on the caliper mounting. Let me know if you need any measurements against parts I have sitting here.

[1Bad68Cat]

Have you tried contacting Brembo to see if they already have a bracket for your setup?

I've done several Baer/Shelby setups on 67 Mustangs and your bracket looks awfully familiar.... really just going to be a few .001 here and there depending on the caliper mounting. Let me know if you need any measurements against parts I have sitting here.

I have not contacted brembo, but when I had looked at there website, they did not list any disc brake kits for fords older than 1994. I also didn't think they would offer a bracket to bolt the Shelby 6 pot calipers to the wilwood pro spindle I am using since there are so many different variations/setups.

As for the measurements, do you have the ones I asked in the initial post? I plan on purchasing a s197 mustang spindle to confirm the dimensions I got when I mocked the brake setup at home.

[1Bad68Cat]

For anyone still interested. Now to the next problem, WHEELS!:D

[4mm]

Very nice, would the brackets also work on a 70 Mustang?

[1Bad68Cat]

Very nice, would the brackets also work on a 70 Mustang?

If the 70 mustang is using Wilwood Pro-Spindles. If using stock drum brake spindles, Mustang Steve has brackets for them

[70 tt rustang]

I was also interested in doing the same setup on my 70. Is there a bracket also available for my ssbc setup?

[1Bad68Cat]

I was also interested in doing the same setup on my 70. Is there a bracket also available for my ssbc setup?

What setup are you referring to? Wilwood pro-spindle with SSBC brakes or 2013 shelby brembos with a stock 70 mustang spindle?

[70 tt rustang]

What setup are you referring to? Wilwood pro-spindle with SSBC brakes or 2013 shelby brembos with a stock 70 mustang spindle?

Sorry, would 2013 Shelby brembos fit a stock 70 mustang spindle?

[1Bad68Cat]

Mustang Steve has brackets that would work with drum brake spindles. They are at the bottom of the page in the link.
http://www.mustangsteve.com/cobrabrakes.html