Ring Brothers New C10 Handle....well Sort Of!

[SWAPMEETCRAZY]

Was a real pain but in the end I like it.....As u can see these are RB"S 1st gen Camaro handles ......had to cut up 2 new 69 panels to get the geometry right....and do to the extreme angles from buttons to bear claw release i chose to use handles to electrically open door....started with early 70's repop alarm sws which are identical on outside to the stock lock cylinders...batt to them then to h.d. limit sw...push button..batt to h.d. door popper....pulls bear claw

Turn key sw 90*...no batt...effectively locked from outside...inside car..will have a mechanical door handle to release...and a cutoff sw for outside battery mounted in console....Sounds technical...but really simple and effective......jim

[SWAPMEETCRAZY]

more.......

[SWAPMEETCRAZY]

And yes handle was moved 1 1/4" down....also totally clears one-piece windows.....jim

[ccracin]

Awesome Jim! Glad to have you back! Lol :gitrdun:

[SWAPMEETCRAZY]

Awesome Jim! Glad to have you back! Lol :gitrdun:

Workin on hangin the accuair this weekend....see Mr Porters' belly mounts on the floor.....they are simple and sweet...holds air tank,compressor...one on each side behind cab..........more later...........jim

[tazzz2_ca]

Not sure what year specific C-10 you're building, but I just finished the molds for 67-68 Carbon hoods if they are of any interest to you....

[SWAPMEETCRAZY]

Not sure what year specific C-10 you're building, but I just finished the molds for 67-68 Carbon hoods if they are of any interest to you....

68 and yes i am!! Sure Chad is too!! Wondering if it would work with Mr Porter's hinge setup I am running??

[ccracin]

I would love a Carbon hood, but can't go that route on this project. First and foremost i would get fired if I even suggested it. My Dad would flip after he has already bought 2 steel hoods and we have cut one completely apart to make it fit. Second, he wants a cowl induction hood which Albert not making at this point. The second point is what makes it ok. :D Can't have what doesn't exist! :) But Jim on the other hand, you really should have one! :poke:

[tazzz2_ca]

68 and yes i am!! Sure Chad is too!! Wondering if it would work with Mr Porter's hinge setup I am running??

As long as you provided the fasteners you plan to use,, and a measurement for where they need to be placed on the hood it shouldn't be a problem at all... Think of these hoods like steel for the most part with the exception of mounting surfaces.... We have to place a steel plate within the hood to receive the the bolts as you can't thread to composites alone...

With the custom mod's you're making, a nice flat finished Carbon Ram Air Hood would look sinister and very cool on the build I'd think.....

[V8TV]

Albert, do you have the website up or a catalog of all your parts somewhere?

[SWAPMEETCRAZY]

As long as you provided the fasteners you plan to use,, and a measurement for where they need to be placed on the hood it shouldn't be a problem at all... Think of these hoods like steel for the most part with the exception of mounting surfaces.... We have to place a steel plate within the hood to receive the the bolts as you can't thread to composites alone...

With the custom mod's you're making, a nice flat finished Carbon Ram Air Hood would look sinister and very cool on the build I'd think.....

The porterbuilt hinges come with a nutserted plate u weld in....should not be a problem....Pm me when u have a price and a possible delivery date....here's the interior mockup......

[tazzz2_ca]

Very nice indeed.... Congrats

[Code510]

Lots of work into this truck! But all those little details is whats taking it over the top.

Good job! :hapdance:

[WSSix]

Those door handles are trick, Jim. Good job!

[SWAPMEETCRAZY]

Those door handles are trick, Jim. Good job!

thanx...Albert here's a shot of that hinge plate on my stock hood..Let me know when the spy shots of the hood are available!!

another one of my motivational pics..........jim