Tony G's 1970 Chevelle on Forgeline DS3 Wheels

[Forgeline Wheel]

Tony G's 1970 Chevelle stands apart from the crowd, thanks to its original gold patina and 18 inch Forgeline DS3 wheels finished with Satin Gunmetal centers and Brushed outers. See more at: http://www.forgeline.com/customer_gallery_view.php?cvk=877


http://i.imgur.com/Gu9tfNk.jpg
http://i.imgur.com/A5xqsd6.jpg
http://i.imgur.com/hK8mSdY.jpg
http://i.imgur.com/v6fiuug.jpg
http://i.imgur.com/j4kxjSO.jpg

[tigerchevelle]

mark,whats the width of the wheels,bs and tire size on tonys chevelle? thank you.

[Forgeline Wheel]

mark,whats the width of the wheels,bs and tire size on tonys chevelle? thank you.

Tony G's car is running 18x9.5 front, 5.5"BS and 18x11 rear, 6"BS. Tires are 275/35/18 in the front and 315/30/18 in the rear.

[E.rodz]

looks like a great fit are the wheel wells rolled and mini tubbed?.watts link? any rubbing on hard cornering?

[gnx7]

Is there any Mini Tubbing etc involved to run this tire combo?

What about up front for mods? This tire combo would be perfect on my ride.

Looks great!

[Forgeline Wheel]

Here is what I know. Beyond, this, you'll need to ask Tony G.

The chassis features ABC Performance front upper & lower control arms and splined swaybars with Viking Performance coilovers. The rear features ABC Performance complete bolt-on coilover kit with trailing arms and DTS 9 inch axle and Eaton Tru-Trac.

[Apogee]

Tony did a nice job nailing the stance on that car. Great wheels. I'm sure he babies it...:mock:

[Forgeline Wheels]

If you haven't seen it lately, Tony G's Chevelle looks a little different these days. Here it is from his appearance in Super Chevy magazine. Tony G's 1970 Chevelle is the test and development mule for his company, ABC Performance. It's powered by 585HP small block 380ci stroker and Tremec T-56 Magnum 6-speed transmission. The chassis features a boxed frame, ABC crossmember, ABC front upper & lower control arms, splined swaybars, and Viking Performance coilovers. The rear features an ABC 4-link, ABC complete bolt-on coilover conversion, and full floater rear end from Strange Engineering. Wheel corners consist of Wilwood disc brakes (6 piston front calipers, 4 piston rear calipers, and 14 inch rotors) and 315/30ZR18 BFGoodrich g-force Rival tires on 18x10.5 & 18x11.0 Forgeline DS3 wheels. See more at: http://www.forgeline.com/customer_gallery_view.php?cvk=1615

http://i.imgur.com/FVKJvaJ.jpg
http://i.imgur.com/zK9Lc4N.jpg
http://i.imgur.com/ZzNsPeW.jpg
http://i.imgur.com/afrkwq0.jpg

[214Chevy]

I've seen this car on Chevellefactory Instagram page. I love the flat red paint job.

[Forgeline Wheels]

I love the flat red paint job.

I think it might actually be a wrap.

[214Chevy]

I think it might actually be a wrap.

Looks damn good...