Project "PullingOut" 69 Camaro

[CornHusker4Life]

Where to start…This is my first true build. I bought the car sight unseen from Ebay. The owner did NOT know his wife posted it for sale with a phone number to call and after 30 minutes of convincing him he needed to sell it, it was mine. I bought it within 30 minutes of it being posted for sale with no buy it now. The car was almost rust free except for a small marble size hole in the rear window channel. It was an original vinyl top car as well. All original panels except for the front sheet metal and a small patch panel on the left quarter panel that was done years ago. The car was being worked on by a shop 1,000 miles away from home and NOT to my standards. I pulled my car out of the shop just before any real damage/work could be done hence the project name “Pulling Out.” Pulling Out is always the best option in life if you have any doubts. :lmao: When it was time to pick the shop to take over my build there was no doubt in my mind, I was taking it to American Muscle Restoration in Cleveland,TN. John is very meticulous about his cars and takes the same care with his customers cars. John has been on budget throughout the process and on time as well. I could talk on and on about the work they do but I will let the pictures speak for themselves…
Here is a parts list
AMD Fenders, hood, header panel
Built LS2 from LME
DSE Mini-tubs and DSE 4-Link set-up
DSE built 12 Bolt with 3.73 Gears
DSE Upper and Lower Control Arms with adjustable Coil Overs
DSE Subframe connectors
DSE Electric RS Headlight kit
DSE Selecta-Speed wiper kit
13" 4 piston Wilwood discs for Front and rear (black pistons)
Wilwood cable kit and master cylinder(natural finish)
Rack and pinion
Vintage Air
Boze Tach Satin wheels and BFG KDW tires
Fesler hood latch assembly in brushed aluminum
Fesler door handles in brushed aluminum
Fesler trunk and hood hinges in brushed aluminum
Fesler flush mount tail lights in brushed aluminum
How the car arrived to John at American Muscle Restoration
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Camaroasarrived_zps86848694.jpg

[tubbed69]

Nice car to start with,I like your parts list,great start.

[CornHusker4Life]

John wasted NO time getting to work on the car, after the game plan was established. No crazy body mods just side marker delete and a little massaging here and there. The car was "put together" by the previous shop and it was John and I's decision to take it apart and make sure nothing was overlooked.
Removing the primer placed by the previous owner
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/strippingprimer_zpse331b8e9.jpg
Speaker getting deleted
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/speakerwelded_zpse15927ba.jpg
Once everything was "cleaned up" bodywork began. No Paint Jail
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroonrotfrontside_zps72969d0f.jpg

[CornHusker4Life]

More Work Completed
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroonrotbottomwithbodywork_zps6cc27128.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroonrotrightside_zps72c4179a.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaro_zps67058237.jpg
The tailpan had to be cut out and pulled back 1/4" to make it more smooth/correct and not just filled in with a bunch of filler

[CornHusker4Life]

Nice car to start with,I like your parts list,great start.

Thanks for Compliment! I cannot wait for it to be done. I cannot say enough great things about John Oxford and American Muscle Restoration.

[Rick D]

Nice start and plan Jarrod!! What are the plans for color and interior?

[CornHusker4Life]

Nice start and plan Jarrod!! What are the plans for color and interior?

Thanks Rick!!! The car came complete with a NEW orange houndstooth interior but If budget permits I will go full out custom. The car has already been painted Porsche Black. I will post more progress pics tonite.:thumbsup:

[fleetus macmullitz]

Nice start and plan Jarrod.

X2. :thumbsup:

The world does in fact need more black '69's. :D

[tubbed69]

Thanks Rick!!! The car came complete with a NEW orange houndstooth interior but If budget permits I will go full out custom. The car has already been painted Porsche Black. I will post more progress pics tonite.:thumbsup:

I am sure but I think people have been shot on this site for holding out on pictures,we like to see progress,lol:poke:

[CornHusker4Life]

X2. :thumbsup:

The world does in fact need more black '69's. :D


Yea, my previous 69 was red and I have always wanted to build a black one:thankyou:

[CornHusker4Life]

I am sure but I think people have been shot on this site for holding out on pictures,we like to see progress,lol:poke:

Pics will have to wait until tonight. The old lady wanted me to come to bed last night, so it was be shot by her or you guys:bigun2: .lol

[Ron in SoCal]

I'll help...:)

http://www.lateral-g.net/forums/showthread.php4?p=492041#post492041

[CornHusker4Life]

More progress pics...Ron cheated a little.lol
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Bottomofcaronrot_zps20ba3010.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camarobottominprimer_zps0de38eb8.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroroofinprimer_zps438caf60.jpg

[CornHusker4Life]

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroprimertrunk_zpsa540647b.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroinprimer_zpsdc0d6fdd.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroprimerparts_zps189e170a.jpg

[CornHusker4Life]

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Camaroprimerpaint_zps082e8d37.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/bottomofcarpainted_zpsa2f45da8.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/finalprime_zps11e99a32.jpg

[CornHusker4Life]

Porsche Black Base
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camarobasepaint_zps5b529a02.jpg
After Clear
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaroleavingboothleftside_zps4da47211.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/carleavingbooth_zpsa671395e.jpg

[CornHusker4Life]

This is John checking the time in the paint
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/watchinpaint_zps892f588c.jpg
Parts getting trimmed out
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/partspainted_zpsd5ae9c7d.jpg
That is all the current progress on the car. All of this work has been done in less than 4 months!!!

[tubbed69]

That's very fast,looks great

[CornHusker4Life]

That's very fast,looks great

Thanks!!! Cannot wait to see it as a roller with the wheels/tires on it.

[firstgencam]

Looks great jarrod! I appreciate the feedback, we love to work on Camaros and especially those where the owner wants it to be nice and done right! Won't be long and we will be cruising from Tennessee to nebraska to deliver the car to you!

[waynieZ]

Paint looks awesome! You have a great project. :thumbsup:

[CornHusker4Life]

Paint looks awesome! You have a great project. :thumbsup:

Thanks!!! All the props goes to John and his team.

Looks great jarrod! I appreciate the feedback, we love to work on Camaros and especially those where the owner wants it to be nice and done right! Won't be long and we will be cruising from Tennessee to nebraska to deliver the car to you!

Cannot wait Bro:D

[jeremy30thz]

Car looks great Jarrod mine is pretty close behind yours. I will agree that Johns team does excellent work and they don't waist any time doing it

[CornHusker4Life]

Car looks great Jarrod mine is pretty close behind yours. I will agree that Johns team does excellent work and they don't waist any time doing it

Thanks, Jeremy. Yea I saw the picks of your firebird before it arrived at John's. I am glad you are continuing to build it, it would have been hard not to say screw it:bang: .

[NorCal72]

Oh man, love the color! This thing is going to be nasty. Cant wait to see it with wheels/tires.:gitrdun:

[214Chevy]

Not cool!! :warning: Well, yes the project is very cool. :thumbsup: But, it's not cool that you've been holding out on us. LOL!! Looking really good sir.

[firstgencam]

Car looks great Jarrod mine is pretty close behind yours. I will agree that Johns team does excellent work and they don't waist any time doing it

Thnx for the props fellas! Where is your thread??? Haha

[WSSix]

So if I'm reading this correctly, the car is obviously black and the interior with be orange houndstooth? I like that idea. Glad the car is moving along nicely. Good job guys.

[CornHusker4Life]

So if I'm reading this correctly, the car is obviously black and the interior with be orange houndstooth? I like that idea. Glad the car is moving along nicely. Good job guys.

Thanks. When I bought the car the previous owner had already purchased a complete Orange houndstooth interior, seat covers already installed and everything. I may go custom leather if there is any $ left over but if not the houndstooth is going in.

[Che70velle]

Very cool! :thumbsup:

[Ron in SoCal]

Car looks great. I can now see where John's muscle factory is :D

You guys Rock! :thumbsup:

[aggie91]

Man that black looks good. I think you should stay with the Orange Houndstooth interior. I don't think I have ever seen that combo before and it would look killer!

[CornHusker4Life]

Body Being Westsanded Today
http://i131.photobucket.com/albums/p281/jmcalevy/wetsandrightside2_zps7e19511d.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/wetsandrightside_zps5c60d426.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/wetsandleftside_zps3cc932c2.jpg

[CornHusker4Life]

Parts Painted Today
http://i131.photobucket.com/albums/p281/jmcalevy/partspainted4_zps01a60acf.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/partspainted3_zpsc0c02b4c.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/partspainted2_zps0b3087eb.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/partspainted1_zps7971989d.jpg

[tubbed69]

paint really looks good,hard to beat that black,these guys don't fool around,you will be riding soon.

[Rick D]

Looking good Jarod!! Are you hoping to have it out this year??

[WSSix]

At the very least, I'd put the orange pieces in the car before making the decision. I think it would look good but it may be too much orange once it's in the car. Anyway, carry on. John and his guys obviously aren't fooling around.

[CornHusker4Life]

Looking good Jarod!! Are you hoping to have it out this year??

Rick, the plan is to have it on the road this year as long as we don't get an early snowfall in Nebraska.

[CornHusker4Life]

At the very least, I'd put the orange pieces in the car before making the decision. I think it would look good but it may be too much orange once it's in the car. Anyway, carry on. John and his guys obviously aren't fooling around.

Trey, I worry the orange will be too much as well. I will definitely put the pieces in there and post some pics for opinions. I also do not want the car to feel like it is a Halloween theme with the black/orange.

[FETorino]

Man that black looks good. I think you should stay with the Orange Houndstooth interior. I don't think I have ever seen that combo before and it would look killer!

Trey, I worry the orange will be too much as well. I will definitely put the pieces in there and post some pics for opinions. I also do not want the car to feel like it is a Halloween theme with the black/orange.

The combo sounds bold. I like bold:D

You have to decide for yourself if its love or hate. Don't put to much weight in everyone else's opinion unless you are headed to the auction block.

Killer progress in such a short window.

.:cheers:

[CornHusker4Life]

The combo sounds bold. I like bold:D

You have to decide for yourself if its love or hate. Don't put to much weight in everyone else's opinion unless you are headed to the auction block.

Killer progress in such a short window.

.:cheers:

Rob, I hear ya. I just like to get peoples different views and ideas. This will NOT be going to the auction block

[RECOVERY ROOM]

Trey, I worry the orange will be too much as well. I will definitely put the pieces in there and post some pics for opinions. I also do not want the car to feel like it is a Halloween theme with the black/orange.

I agree...

[CornHusker4Life]

I agree...

I need to get over to your shop and pick your brain a little on the interior. It is only 3 blocks from my house and all...:thumbsup:

[firstgencam]

I need to get over to your shop and pick your brain a little on the interior. It is only 3 blocks from my house and all...:thumbsup:

The last two 55 chevy's recovery room did were from the shop I worked at for 6yrs. They do great work. The ZL55 made the great 8 and the one most recently of Steve Harbison is a really nice car as well...

[firstgencam]

Car looks great. I can now see where John's muscle factory is :D

You guys Rock! :thumbsup:




Thanks Ron, we dont mess around, I dont bring a car in until we can commit to working on it solid if thats what the customer desires.... No paint jail in cleveland, tn!:cheers:

[RECOVERY ROOM]

The last two 55 chevy's recovery room did were from the shop I worked at for 6yrs. They do great work. The ZL55 made the great 8 and the one most recently of Steve Harbison is a really nice car as well...

You worked with David?

[CornHusker4Life]

Jon sent me a teaser pic of my quarter panel wet sanded
http://i131.photobucket.com/albums/p281/jmcalevy/Wetsanded_zps5a6894f5.jpg

[Frankenstine]

WOW looks like Mirrors to me, Outstanding job.. :gitrdun:

[CornHusker4Life]

WOW looks like Mirrors to me, Outstanding job.. :gitrdun:

Thanks Man!! He just sent me another pic..
http://i131.photobucket.com/albums/p281/jmcalevy/Halfwetsanded_zpsa5c908c4.jpg

[tubbed69]

paint really looks good,hard to beat black

[Bozeforged]

Looks great!

[Rick D]

Looks great Jarod, black is beautiful!! :flashie:

[CornHusker4Life]

Thanks for the Great Feedback Guys:thankyou: The subframe is painted and getting put back together.
http://i131.photobucket.com/albums/p281/jmcalevy/subframeassembly_zps325f9202.jpg

[firstgencam]

You worked with David?

Yes sir for 6 yrs!

[waynieZ]

The paint looks gorgeous !

[CornHusker4Life]

The paint looks gorgeous !
THANKS!
More Progress on the subframe assembly.
http://i131.photobucket.com/albums/p281/jmcalevy/subframeassembly2_zps8aff9f9b.jpg

http://i131.photobucket.com/albums/p281/jmcalevy/subframeassembly3_zps3d13f07b.jpg

[CornHusker4Life]

Subframe Fully assembled, Waiting for the Engine/Tranny
http://i131.photobucket.com/albums/p281/jmcalevy/Completesubframe_zpsd28e72b0.jpg

[CornHusker4Life]

DSE Rearend assembled and Ready to go In.
http://i131.photobucket.com/albums/p281/jmcalevy/DSErearend_zps865a6f55.jpg

[waynieZ]

Its looking nice!

[CornHusker4Life]

John and the guys are making great progress
http://i131.photobucket.com/albums/p281/jmcalevy/dynomat_zps457e8f99.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/frontroller_zpsc1c3ee14.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/roller_zps77e98b83.jpg

[tubbed69]

very nice Jarod!!!

[CornHusker4Life]

Well, it has been awhile since an update due to the fact of missing parts. When I pulled my car out of the previous shop I was told that all the parts were packed in the car and they were NOT, I should have pulled the parts out and checked before I took the car, Lesson learned. I have since made two more major purchases through MCB for needed parts before progress could continue. Matt and Kim have been great!!! Here are a couple pics...more to come later in the week.
http://i131.photobucket.com/albums/p281/jmcalevy/feslerdoorhandle_zpsd8cd16fe.jpg
Fesler door handles
http://i131.photobucket.com/albums/p281/jmcalevy/bumper_zpsdb27a492.jpg

And The New Project After the Camaro is done
http://i131.photobucket.com/albums/p281/jmcalevy/1955_zps58b01f6c.jpg

[coolwelder62]

And The New Project After the Camaro is done[/B]
http://i131.photobucket.com/albums/p281/jmcalevy/1955_zps58b01f6c.jpg[/QUOTE]the 55 is way cool!!!!!!!May I suggest an Ironwork's Tri-5 chassis for that thing.

[LS7 Z/28]

Man that looks clean, you can't beat black. I'm sure you're very happy with it.

[CornHusker4Life]

http://i131.photobucket.com/albums/p281/jmcalevy/1955_zps58b01f6c.jpg[/QUOTE]the 55 is way cool!!!!!!!May I suggest an Ironwork's Tri-5 chassis for that thing.[/QUOTE]

Scott, I am pretty excited about this 55. Coming up with a plan will be half the fun. I think an aftermarket chassis will be out of the budget but would be sweet if I could afford it. The 55 is a 1 family owned car that has been in Texas its entire life. Been stored inside since 1969 when the elderly owner lost her license. Original everything. Will need trunk and floor pans but that is it for rust.

[redefined]

Looks good so far, any updates! :popcorn2:

[CornHusker4Life]

Looks good so far, any updates! :popcorn2:

Sorry for the delay
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Innerfenderssatinblack_zps0ec89d31.jpg
Inner Fenders painted Satin Black. I like the contrast between the Gloss Black.
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/DSEwipermotor_zps62eedae8.jpg
A/C Bulkhead and DSE wiper motor
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Gaugesindashpainted_zps686bc52c.jpg
NVU Gauges in the DSE dash
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/ls2enginebay_zpse19e66a7.jpg
LS2 in place with a Holley A/C bracket. The power steering pump will be replaced with a DSE pump and remote reservoir.

[tubbed69]

looking good Jarod,progress is good.:thumbsup:

[CornHusker4Life]

looking good Jarod,progress is good.:thumbsup:

Thanks Man! Getting excited about the progress. Something to look forward to when it is -15 here.

[pitts12driver]

Great work! Looks amazing and coming along well.

[Roe]

Looking good Jarod!

[brownz]

Please leave the outside of the 55 as is!!!

[CornHusker4Life]

My car has been coming along nicely but taking time due to parts missing/needed. MCB has been great at getting the parts I need fast and cheap. Now we are waiting for more parts. Going with the DSE battery relocation kit and there master cylinder/booster combo.

http://i131.photobucket.com/albums/p281/jmcalevy/1969radiator_zpsbe94b626.jpg

http://i131.photobucket.com/albums/p281/jmcalevy/1969camarowindshield_zpsd469848c.jpg

http://i131.photobucket.com/albums/p281/jmcalevy/1969camarorearwindow_zpse72d27d1.jpg

[Jay Hilliard]

Car looks great. Paint really pops for sure. I think Nebraska Cornhusker red sounds good for interior. Red interior in a black car always looks great IMO.

[sleepertime]

:thumbsup:

Wow you guys are making some serious progress. No messing around there.

The car is looking great.

:flag2:

[waynieZ]

Looking Sweet!

[CornHusker4Life]

Thanks Fellas! The glass is from Auto City Classic and is their smoked glass. The shop could not be happier with the glass and the aftermarket trim actually fit good Not great but what can you expect.

[Spiffav8]

Looks great! You gotta be stoked about the progress!

:thumbsup: :thumbsup:

[CornHusker4Life]

Looks great! You gotta be stoked about the progress!

:thumbsup: :thumbsup:

Thanks Curtis! I am getting more pumped as it gets closer and closer to getting finsihed

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969DSEboosterandMastercyclinder_zpsccf89864.jpg

Chris German used the DSE Master/Booster combo on his track car "Delirious" and said it was awesome so I went with the same setup

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969stainlessworksheaders_zpsdc511b48.jpg

I went with stainless works headers

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969brakelines2_zpsc9daae68.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969brakelines3_zps5929fffb.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969brakelines_zps41b998ea.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969brakelines5_zpse757dc73.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969brakelines6_zps35d62f93.jpg

Brake lines being plumbed and line brackets being fabricated

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969rearonlift_zpscf019dfb.jpg

The car is completely wired and the Fesler brushed aluminum taillights are in

[tubbed69]

great work Jarod:thumbsup: :thumbsup:

[Rick D]

Looks great Jarod!! :thumbsup:

[Spiffav8]

Yeah Buddy!! You're doing it right and it shows.

:thumbsup: :thumbsup:

[CornHusker4Life]

The shop has been kicking A$$ on my car. All the fuel and brake lines are ran and the fenders are on. It will be ready to fire shortly after the install of some sensors.
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969sideview_zpsd4a0bea2.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Fenderandtire_zps7e51c64e.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Fenderandradiator_zps5cfab42e.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969camarodoorgap_zps6186f8ae.jpg

[tubbed69]

Glad to see some progress pics,I am sure you are excited to be getting close,especially hearing it run:thumbsup: :thumbsup:

[waynieZ]

Looking good.

[Spiffav8]

Oh man... That's awesome! Love the color choice.

:thumbsup: :thumbsup:

[CornHusker4Life]

Glad to see some progress pics,I am sure you are excited to be getting close,especially hearing it run:thumbsup: :thumbsup:

It is going to be like Christmas Day:D

Looking good.

Oh man... That's awesome! Love the color choice.

:thumbsup: :thumbsup:

Thanks Fellas! More progress pics

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969fenderbraces_zps6d1ece10.jpg

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969camarogrill_zps973ac3c8.jpg

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969grill_zps2723b85a.jpg

http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969camaroheadlighbucket_zps765a0778.jpg

[CornHusker4Life]

Front end Complete
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/1969camarogrillcomplete_zps8cb3327b.jpg

[CornHusker4Life]

The Fesler Taillights are all wired up. All the wiring is soldered and in a wire loom so it is nice and neat
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/taillightwiring_zps2b9d4601.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/taillightwiring2_zps2cf7cd2e.jpg
I went with Redline Lumtronix for my headlights and the DSE battery relocation kit
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/Haloheadlights_zps67377262.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/DSEbatteryrelocation_zpsb1a6cc64.jpg

[tubbed69]

Looking good buddy,very close:thumbsup: :thumbsup: :thumbsup:

[ModernDay67SS]

Wow... Car is looking good!

[CornHusker4Life]

Looking good buddy,very close:thumbsup: :thumbsup: :thumbsup:

Wow... Car is looking good!

Thanks Fellas! I am getting excited!

[jeremy30thz]

Looking good man

[jonjon]

Very impressive. Any update to your build?

[CornHusker4Life]

Very impressive. Any update to your build?

Thanks! No real updates(Pictures). My car is at the interior shop and they are fabricating the console, door panels, package tray, trunk panels and modifying the seats this week. Should have some pictures by the end of next week of some interior fabrication....stay tuned.:popcorn2:

[jonjon]

Thanks! No real updates(Pictures). My car is at the interior shop and they are fabricating the console, door panels, package tray, trunk panels and modifying the seats this week. Should have some pictures by the end of next week of some interior fabrication....stay tuned.:popcorn2:

Awesome. Looking forward to checking out the progress!

[CornHusker4Life]

The interior shop has almost completed the fab work for the trunk.
http://i131.photobucket.com/albums/p281/jmcalevy/1969camarotrunkfab_zpsd1f81dad.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/1969camarotrunkfab2_zps1f40c161.jpg

[Spiffav8]

:confused59: Well...that doesn't suck!

Nicely done! :captain:

[CornHusker4Life]

:confused59: Well...that doesn't suck!

Nicely done! :captain:

Thanks Curtis, The interior shop has been kicking butt on the fab work

I had the interior shop put a Clayton Machine works dome light in the trunk
http://i131.photobucket.com/albums/p281/jmcalevy/1969camarotrunkwithdomelight_zpsc6a514ef.jpg

Headliner fabbed with Clayton Dome light
http://i131.photobucket.com/albums/p281/jmcalevy/1969camaroheadlinerfab_zpsa73e1579.jpg

Sail panels and Package tray fabbed
http://i131.photobucket.com/albums/p281/jmcalevy/1969camaropackagetray_zpsf7594172.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/1969sailpanels_zpsefac8280.jpg

TMI foam on the Seats
http://i131.photobucket.com/albums/p281/jmcalevy/1969camaroseatswithTMIfoam_zps65243990.jpg

[Justin@EntropyRad]

Love the way the wood looks in the interior..even if just base boards...bet it would look good left in there and stained or varnished

[waynieZ]

Looking good! Those seat foams look like they will be comfortable.

[CornHusker4Life]

Love the way the wood looks in the interior..even if just base boards...bet it would look good left in there and stained or varnished
Yea, they are just boards that are getting covered. Staining them is a cool idea thou Justin.

Looking good! Those seat foams look like they will be comfortable.

Thanks Wayne! I am going to move the drivers seat back 3 inches to accommodate for my height.

[randy]

nice build name.

My problem is my car is a project because i didn't pull out lol.

Nice build

[MCB Matt]

The Build looks great, obviously we love black F Body's too!! Great taste and high quality work!

We need to get some pics for the new website :thumbsup:

Proud to be a supplier for your project and thank you much for the biz!

Matt

[CornHusker4Life]

Interior just got finished and the color is hard to see in the crappy cell phone pics. The color is Husker Red leather with red houndstooth
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaro%20door%20panel_zps5h5unpaj.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaro%20trunk_zpsz24kuw4k.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaro%20headliner_zpsbkurvcly.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaro%20seats_zpsnlycksld.jpg
http://i131.photobucket.com/albums/p281/jmcalevy/camaro%20build%20thread/camaro%20console_zpsf0ynxr7q.jpg

[WSSix]

Looks great to me. It's really hard to beat a red interior on a black car.

[MCB Matt]

Almost there! The interior turned out great!! Can't beat Black/Red combo.

Keep us posted. We are excited to be providing products for your build.

Matt

[CornHusker4Life]

Well life got in the way and delayed my car a little bit but it is getting close

ApPDdRMsbMc&feature
Getting the idle dialed in

zNmk1QR0ihs&feature
Final Pull

Mike at Vengeance racing did the tune on the PCM dyno. We went with a very drivable conservative tune and achieved 402 RWHP and 373 Tq. I am very happy.:lol:

[Spiffav8]

Nice! Now...get it outside on a sunny day and take lots of pictures for us.

:thumbsup: :thumbsup:

[tmadden]

Car is looking fabulous. That interior is sweet

[chichirone]

Looks great and sounds awesome.