Streetbird 69 rust bucket firebird [Archive]

streetbird

06-29-2013, 07:48 AM

After searching a musclecar for about 1 year, I finaly found a compromise.
I was looking for a camaro but I found a 69 firebird.
I want some subtile change but I need a fun car to drive.
Keep in mind that is my first complete restoration and its my first muscle car

Ps sorry for my english, im french

So this is how I imaginate it.

http://i9.photobucket.com/albums/a56/clown73/059_zps307e6556.jpg (http://s9.photobucket.com/user/clown73/media/059_zps307e6556.jpg.html)

214Chevy

06-29-2013, 08:03 AM

Nice rendering Streetbird and welcome!! What are your plans for the car? Such as motor, trans, wheels, brakes, etc? Post pics of the car when you can. :welcome3:

WSSix

06-29-2013, 08:30 AM

Looks good to me! Welcome to the site.

streetbird

06-29-2013, 09:06 AM

plan for the car is
95% new body panel due to the amount of rust
dse deep tubs
dse subframe connector
dse or ridetech 4 link
coil over in front
rack and pinion
tubular a arm
and some minor change to the body, grill, rear bumper, spoiler

http://i9.photobucket.com/albums/a56/clown73/001-12_zps52cb353a.jpg (http://s9.photobucket.com/user/clown73/media/001-12_zps52cb353a.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/062_zps7446d1fb.jpg (http://s9.photobucket.com/user/clown73/media/062_zps7446d1fb.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/063_zps8e5fa407.jpg (http://s9.photobucket.com/user/clown73/media/063_zps8e5fa407.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/064_zps04b4cc4f.jpg (http://s9.photobucket.com/user/clown73/media/064_zps04b4cc4f.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/066_zps39952759.jpg (http://s9.photobucket.com/user/clown73/media/066_zps39952759.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/070_zps13d3a738.jpg (http://s9.photobucket.com/user/clown73/media/070_zps13d3a738.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/208_zps9c56477a.jpg (http://s9.photobucket.com/user/clown73/media/208_zps9c56477a.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/209_zps0fc821ca.jpg (http://s9.photobucket.com/user/clown73/media/209_zps0fc821ca.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/220_zps95416ce0.jpg (http://s9.photobucket.com/user/clown73/media/220_zps95416ce0.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/221_zpsbbae3b1a.jpg (http://s9.photobucket.com/user/clown73/media/221_zpsbbae3b1a.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/022_zpsbef02f4a.jpg (http://s9.photobucket.com/user/clown73/media/022_zpsbef02f4a.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/025_zps99ebf231.jpg (http://s9.photobucket.com/user/clown73/media/025_zps99ebf231.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/026_zpsee4d7de1.jpg (http://s9.photobucket.com/user/clown73/media/026_zpsee4d7de1.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/157_zpse0c7d2bf.jpg (http://s9.photobucket.com/user/clown73/media/157_zpse0c7d2bf.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/158_zps02c42401.jpg (http://s9.photobucket.com/user/clown73/media/158_zps02c42401.jpg.html)

I will start with the floor
first panel order
floor pan
trunk pan
fraime rail
firewall
firewall to floor panels
eye brakets
dse subframe connectors
dse deep tub

garickman

06-29-2013, 09:29 AM

Welcome! Looks like you're off to a good start. Don't know how long you have been on this site lurking but if you have not seen it, perhaps this will give you some inspiration.

Probably the baddest 1969 firebird ever built!

http://www.lateral-g.net/forums/showthread.php4?t=29637&highlight=encore

FETorino

06-29-2013, 09:35 AM

After searching a musclecar for about 1 year, I finaly found an upgrade.
I was looking for a camaro but I found a 69 firebird.
I want some subtile change but I need a fun car to drive.
Keep in mind that is my first complete restoration and its my first muscle car

Ps sorry for my english, im french

So this is how I imaginate it.

Welcome I have to disagree with you on the compromise statement. I think you got the more refined and stylish GM first gen. My suggested edit is above.:D

It looks like you've jumped right in.

What about the drivetrain? Are you keeping the Poncho power? 4,5 or 6 speed or auto?

:cheers:

214Chevy

06-29-2013, 11:55 AM

Take it easy on him Rob. He's a :newbie: . Break him in slowly now. LOL!!

Vince@Meanstreets

06-29-2013, 03:38 PM

love them birds, looking good so far

streetbird

07-10-2013, 01:59 PM

Its christmas in summer
Got my first order

Floor pan
Trunk pan
Frame rails
Firewall to floor braces
Eyes brakets
Firewall heater delete
Trunk cover
Trunk gutters
DSE deep tubs
DSE subframe connectors

http://i9.photobucket.com/albums/a56/clown73/063_zps38ceaba5.jpg (http://s9.photobucket.com/user/clown73/media/063_zps38ceaba5.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/065_zpsb082fc14.jpg (http://s9.photobucket.com/user/clown73/media/065_zpsb082fc14.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/066_zpsfde7e7d1.jpg (http://s9.photobucket.com/user/clown73/media/066_zpsfde7e7d1.jpg.html)

Timberline

07-10-2013, 03:22 PM

Looking forward to following your Firebird build. Too many Camaro's need more birds in the mix. :)

214Chevy

07-10-2013, 04:22 PM

Sweet!! :ups: Nothing like getting new parts in. Now get to :superhack: and :weld: . And post pics too. :popcorn2:

ma73z

07-10-2013, 06:56 PM

Welcome to "THE SITE"! Keep the pics coming, love seeing the firebird projects.:thumbsup: :thumbsup:

streetbird

08-03-2013, 11:30 AM

2.0 jig done
http://i9.photobucket.com/albums/a56/clown73/005_zps7ef371a4.jpg (http://s9.photobucket.com/user/clown73/media/005_zps7ef371a4.jpg.html)
I little bit of precision (fisher measurements 1/8 tolerance)
I got less than 1/16
http://i9.photobucket.com/albums/a56/clown73/006_zps723ab598.jpg (http://s9.photobucket.com/user/clown73/media/006_zps723ab598.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/072_zps0be9b4b9.jpg (http://s9.photobucket.com/user/clown73/media/072_zps0be9b4b9.jpg.html)
Start to assemble the floor but no more gas for the welder so thats it for this week
http://i9.photobucket.com/albums/a56/clown73/140_zps8746cf98.jpg (http://s9.photobucket.com/user/clown73/media/140_zps8746cf98.jpg.html)

waynieZ

08-03-2013, 11:34 AM

Nice project, and nice job on the jig.

streetbird

08-04-2013, 06:52 AM

Nice project, and nice job on the jig.

Thx, as you know, its not simple as it look

WSSix

08-04-2013, 11:28 AM

Nice work on getting the jig precise. Good luck with getting the car back together!

streetbird

09-04-2013, 04:42 PM

Floor is now assembled, not welded yet because I want more body panel to verify alignement. Bolted with metal screw because the cleco cant hold the stress of the differents arch of the trunk floor and frame rail(taiwan quality).

I will order structure panel next week, thank for support.

jr2226

09-04-2013, 04:59 PM

Nice work. Hey you may think of a bigger gas bottle. That bottle won't last for this size job.

Tuske427

09-05-2013, 06:43 PM

Cool project and it looks like you're off to a great start! Keep the momentum going and you'll be driving it very soon

streetbird

09-28-2013, 07:22 PM

receive new body panel today.
http://i9.photobucket.com/albums/a56/clown73/120_zpsb8698dfe.jpg (http://s9.photobucket.com/user/clown73/media/120_zpsb8698dfe.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/119_zps23ba88fc.jpg (http://s9.photobucket.com/user/clown73/media/119_zps23ba88fc.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/129_zps17224d5b.jpg (http://s9.photobucket.com/user/clown73/media/129_zps17224d5b.jpg.html)

Boostable

09-28-2013, 07:26 PM

Looking good, really love the Jig! I want one...:thumbsup:

WSSix

09-29-2013, 08:26 AM

Wow! Is there any panel from the original car that you'll reuse?

67goatman455

09-29-2013, 09:25 AM

yea no kidding.....i dont think you even needed to buy a car in the first place

Twoblackmarks...

09-29-2013, 10:01 AM

Why buy a car, when you can make one from scratch yourself! :D He..He.. Really cool! :)

streetbird

09-29-2013, 10:42 AM

I will probably not reuse any part of the car but I need a car to take some measurements and to troubleshoot when something dont fit.

streetbird

09-29-2013, 02:37 PM

Make some progress today.
Little mockup jig for the cowl panel to structure
http://i9.photobucket.com/albums/a56/clown73/001_zps6a0fad77.jpg (http://s9.photobucket.com/user/clown73/media/001_zps6a0fad77.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/093_zpsc191f130.jpg (http://s9.photobucket.com/user/clown73/media/093_zpsc191f130.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/094_zpsa3f8a797.jpg (http://s9.photobucket.com/user/clown73/media/094_zpsa3f8a797.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/095_zps374f61d0.jpg (http://s9.photobucket.com/user/clown73/media/095_zps374f61d0.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/096_zps3fcc571a.jpg (http://s9.photobucket.com/user/clown73/media/096_zps3fcc571a.jpg.html)

Thx to follow my built:thankyou:

Leadfoot1

10-07-2013, 09:45 AM

And you say its your first time messing with cars????!!!!!!!!

Jee...

My first tought was, "you know...you could easily have had that 69 Camaro finally", since you we're going to buld it from scratch lol!! And eh.....at that, its not even too late you know!

No but....seriously, i'm completely knocked out! From the beginning, reading your tread, i wasnt expecting anything close to this..at all!!! I mean, the original car looked kinda solid too so i got the impression you were going to build it.... WRONG!!!! Lol!!!!

I was also very glad to find out that we're very close neighbours! I dont know too many guys that share the same level of passion for that kind of work, let alone close to me and i dont even mention as much as i do so its pretty cool, hope we get to meet each other sometime.

Hey, beeing so close, next time you run out of gas or just need a hand, let me know, i'd gladly help out! (... As it'd get me to seeing that beast in person lol!!!) And im only like 10 minutes from you sooooo.... Sometimes we need another set of hands...

Post some more when you progress...i'm watching this one come alive!

Congrats on jumping into this with both feet! It takes some serious courage to do what you are doing, times 100 in a situation where you have no experience!!!

Woohoooo!!!!!:wow:

Lead.

streetbird

10-08-2013, 03:50 PM

streetbird

11-16-2013, 09:36 AM

The firewall fit like s*** but after hammering I was able to have reasonable gap.
http://i9.photobucket.com/albums/a56/clown73/285_zps426ba0c4.jpg (http://s9.photobucket.com/user/clown73/media/285_zps426ba0c4.jpg.html)
Test fitting the tulip panel.
Not too bad but I had to cut and do some hammer and dolly work to have if fit nice.
http://i9.photobucket.com/albums/a56/clown73/286_zpscda326da.jpg (http://s9.photobucket.com/user/clown73/media/286_zpscda326da.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/289_zps5a707374.jpg (http://s9.photobucket.com/user/clown73/media/289_zps5a707374.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/290_zps47b0cb32.jpg (http://s9.photobucket.com/user/clown73/media/290_zps47b0cb32.jpg.html)
Driver side need more work
http://i9.photobucket.com/albums/a56/clown73/288_zps8a2b8733.jpg (http://s9.photobucket.com/user/clown73/media/288_zps8a2b8733.jpg.html)
Here is the wrong spot on the firewall
http://i9.photobucket.com/albums/a56/clown73/292_zps762010af.jpg (http://s9.photobucket.com/user/clown73/media/292_zps762010af.jpg.html)
Better gap now
http://i9.photobucket.com/albums/a56/clown73/291_zps0edcc15b.jpg (http://s9.photobucket.com/user/clown73/media/291_zps0edcc15b.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/287_zpseb41e967.jpg (http://s9.photobucket.com/user/clown73/media/287_zpseb41e967.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/294_zps60b4f557.jpg (http://s9.photobucket.com/user/clown73/media/294_zps60b4f557.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/293_zps644f191b.jpg (http://s9.photobucket.com/user/clown73/media/293_zps644f191b.jpg.html)

214Chevy

11-16-2013, 11:31 AM

The firewall fit like s***

Doesn't 75% of the stuff out there? Anyway, you're making waves on the car. Keep up the good work and keep the pics coming.:thumbsup:

Bakaruda

11-18-2013, 08:14 AM

I admire the time and work it takes to do this, good luck with it.

streetbird

11-30-2013, 11:38 AM

Beebe

11-30-2013, 01:59 PM

Looking Great, I would be intimidated for sure!! :confused59:

Keep up with the updates , im hooked.

Leadfoot1

12-01-2013, 11:01 AM

Not a big update but...
Starting to fit the driver side tub.
Need a little bit off trimming but it fit good
http://i9.photobucket.com/albums/a56/clown73/IMAG0240_zps230ba381.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0240_zps230ba381.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0241_zps00eaf486.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0241_zps00eaf486.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0235_zpsefbb35dd.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0235_zpsefbb35dd.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0236_zpse6d86189.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0236_zpse6d86189.jpg.html)

T'est un malade!!!!

Hey, j'tai pas oublier...la vie me tombe dessus.... Un tas de brique a la fois, jai barrer du dos qqs semaines pis cette semaine un matin J'ai eu un esti d'OS (paralisie faciale) ca ma foutu a terre.... Je reprends un peu. Mais decourager...

J'aimerais ca passer si ca tiens toujours qqs temps. Refile moi ton tel en pm.

Keep the good work up! Coming along VERY nicely!! :superhack:

:gitrdun:

Lead.

Vince@Meanstreets

12-01-2013, 11:16 AM

T'est un malade!!!!

Hey, j'tai pas oublier...la vie me tombe dessus.... Un tas de brique a la fois, jai barrer du dos qqs semaines pis cette semaine un matin J'ai eu un esti d'OS (paralisie faciale) ca ma foutu a terre.... Je reprends un peu. Mais decourager...

J'aimerais ca passer si ca tiens toujours qqs temps. Refile moi ton tel en pm.

Keep the good work up! Coming along VERY nicely!! :superhack:

:gitrdun:

Lead.

sick indeed, nice work. what are you doing with the old body? twin in full race trim?

tubbed69

12-01-2013, 11:39 AM

You are doing a great job on this one for sure,those aftermarket parts do need a lot of adjustments to make them fit,but your work looks great:gitrdun:

streetbird

12-07-2013, 09:57 AM

Passenger side tub
http://i9.photobucket.com/albums/a56/clown73/IMAG0254_zpseb86b02c.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0254_zpseb86b02c.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0255_zps44acfb31.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0255_zps44acfb31.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0256_zpsf864758d.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0256_zpsf864758d.jpg.html)

streetbird

12-13-2013, 01:57 PM

Receive right quarter, top, rear panel.
Time to weld all the car very soon
http://i9.photobucket.com/albums/a56/clown73/IMAG0261_zpsd3575bb4.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0261_zpsd3575bb4.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0259_zpsff406a63.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0259_zpsff406a63.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0260_zps2421bbd9.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0260_zps2421bbd9.jpg.html)

Leadfoot1

12-14-2013, 06:54 AM

Man....

Looking carefully at your pics, it makes me think twice about the way i should attack my 67. It needs a full floor and i was going to just patch the rear section but was also thinking about replacing the rear floor with a one piece unit as its almost easier, but the way i was thinking was to do one at a time to keep the structure straight and just remove and replace one piece at a time like i always do.... But it almost looks easier and FASTER. To just cut the whole ass end out (full 1/4 s, cabin floor, rear floor, the top, as i need a top panel too and the tail section) and just build a new one!!! You deal with all new steel, just need to fit them and voila!!! Well....thats what you make it look like anyway!!!

Vince, i like your style... An Evil Race Twin.... Thats my style!!!!!

Are you workin on the car this week end StreetBird?

:thumbsup: :popcorn2:

Lead.

streetbird

12-14-2013, 08:25 AM

to cold to work on the car -30celcius, I heat the garage with a 4800 and I use the same plug to run the compressor and the welder, this summer I will change the electrical panel to an appropriate one.

Vince@Meanstreets

12-14-2013, 08:35 AM

Geeze, and I was complaining of 8 degrees cel here.

Stay warm and work on that thing when it warms up a bit. Don't let the cold affect the build.

Looking great so far.

streetbird

12-23-2013, 02:51 PM

Start to weld some part. I suck in welding = hours of grinding
http://i9.photobucket.com/albums/a56/clown73/IMAG0263_zps4d4f7310.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0263_zps4d4f7310.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0264_zpscaef6684.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0264_zpscaef6684.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0271_zps50377160.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0271_zps50377160.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0269_zpsad96df87.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0269_zpsad96df87.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0265_zps3f087721.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0265_zps3f087721.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0273_zpsa04af241.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0273_zpsa04af241.jpg.html)

streetbird

12-31-2013, 09:43 AM

Sit back the jig to ground but its warped.
So I screwed it to the garage floor to make it straith.
I reinstalled the structure and quarter to realign.
I didnt receive driver side quarter so I did it on pass side only and the structure is ready to weld on the floor pan.

http://i9.photobucket.com/albums/a56/clown73/IMAG0276_zps744703b8.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0276_zps744703b8.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0274_zpsddefd510.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0274_zpsddefd510.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0278_zps298bba1a.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0278_zps298bba1a.jpg.html)

streetbird

01-17-2014, 12:59 PM

http://i9.photobucket.com/albums/a56/clown73/IMAG0284_zpsfc74a344.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0284_zpsfc74a344.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0286_zpsa3532082.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0286_zpsa3532082.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0290_zpsc93ce459.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0290_zpsc93ce459.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0289_zps4cbd7905.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0289_zps4cbd7905.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0287_zps05248d50.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0287_zps05248d50.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0288_zpse1065953.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0288_zpse1065953.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0297_zps4262fb41.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0297_zps4262fb41.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0296_zpsb1e1ce3a.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0296_zpsb1e1ce3a.jpg.html)
Test fit the roof panel
http://i9.photobucket.com/albums/a56/clown73/IMAG0291_zps391758ca.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0291_zps391758ca.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0294_zps653a24e7.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0294_zps653a24e7.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0292_zpsce549efb.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0292_zpsce549efb.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0293_zps469ce7c5.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0293_zps469ce7c5.jpg.html)
Inner roof brace
http://i9.photobucket.com/albums/a56/clown73/IMAG0298_zps590ebb58.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0298_zps590ebb58.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0303_zps2905a0d8.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0303_zps2905a0d8.jpg.html)

makoshark

01-17-2014, 11:04 PM

streetbird

01-17-2014, 11:09 PM

Your welds look pretty darn good to me:thumbsup:

You are doing an amazing job on your build. Keep it up:thumbsup:

I noticed something though. One of the reasons why DSE leaves the end of their subframe connectors open for you to weld, is you may have to cut the length of them to properly fit to the subframe itself. I was wondering if you had fitted the subframe to make sure there's no interference between the connector and the subframe?

thanks for the advice. I didnt test fit my subframe but with the connectors already welded, if it dont fit I will chop the end of the subframe. Ive got 2 inch between the center of the bolt and the connectors end

makoshark

01-17-2014, 11:28 PM

thanks for the advice. I didnt test fit my subframe but with the connectors already welded, if it dont fit I will chop the end of the subframe. Ive got 2 inch between the center of the bolt and the connectors end

Measuring from the center hole of the rear mount on the subframe is an aspect I never considered:sieg:

tom091074

01-18-2014, 04:36 AM

You are like a mad scientist! Nice work!

waynieZ

01-18-2014, 03:43 PM

You are like a mad scientist! Nice work!

I agree nice work!

streetbird

01-22-2014, 12:28 PM

You are like a mad scientist! Nice work!

haha, don't know why a mad scientist but I like it

streetbird

01-25-2014, 07:58 PM

tulip and cowl welded
http://i9.photobucket.com/albums/a56/clown73/IMAG0313_zps9c490865.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0313_zps9c490865.jpg.html)

streetbird

02-05-2014, 10:48 AM

driver side framerail prep
http://i9.photobucket.com/albums/a56/clown73/IMAG0336_zpsb33b9d14.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0336_zpsb33b9d14.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0337_zps672362fe.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0337_zps672362fe.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0338_zps4534e7b1.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0338_zps4534e7b1.jpg.html)

makoshark

02-05-2014, 02:28 PM

Very good job on the tubs. I like how clean your closeouts transition into the existing structure.

ZMAN1969

02-06-2014, 05:45 AM

http://i9.photobucket.com/albums/a56/clown73/063_zps8e5fa407.jpg
this is almost exactly how my bird looked when I started and its still not back together-my body man bailed in the home stretch. You are a brave man! going that deep into a car, it makes me glad I live in the south (a lot less rot) I am also thinking I need to see more of these builds to motivate me further. Good luck with your build and keep us posted

:y0!:

zingercustoms

02-06-2014, 06:49 AM

streetbird

02-08-2014, 05:13 PM

Really good work...lots of people would get into this half way thru the tear down and run. Good to see someone tenacious enough to stare that much rust in the face and not even see it as an issue because they see the finished product. It looks like you definitely can do it. Got to love the birds. Hope you go with pontiac drive train....I regret not doing that.

I definitely not go with the poncho drivetrain, to expensive to make the power I want and way too heavy.
On a other side I saw your bird tread and I love the rear bumper, I will probably do the same on mine if it not bother you but my skill with fabrication is not good as yours so im not sure about the result

streetbird

02-13-2014, 05:53 PM

I like this picture but its not an update haha
http://i9.photobucket.com/albums/a56/clown73/IMAG0326_zps95e3f59e.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0326_zps95e3f59e.jpg.html)

zingercustoms

02-13-2014, 08:54 PM

You can see how I did it in early posts..not too hard. Won't bother me...looks cool. IMHO :superhack:

streetbird

05-14-2014, 11:04 AM

the car is for sale for some personnal reasons but I will update it till I sold it.

So this is my doors gaps after some hamering and positionning but without cutting. Pretty happy with the result

http://i9.photobucket.com/albums/a56/clown73/IMAG0381_zps6c750a50.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0381_zps6c750a50.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0382_zps0cdd678e.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0382_zps0cdd678e.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMAG0386_zpsbe523a31.jpg (http://s9.photobucket.com/user/clown73/media/IMAG0386_zpsbe523a31.jpg.html)

zingercustoms

05-14-2014, 01:21 PM

Lookin good...sorry to hear its for sale. I have had to do that with a car or two...

Leadfoot1

05-15-2014, 06:00 AM

Yeah....sorry to hear that too. It was coming along nicely!

Any parts you have for sale seperate? Got a price in mind? I can spread the word around locally. I suppose you are selling with the donor paperwork and tags?

Let me know if i can help, :y0!:

Lead.

WSSix

05-15-2014, 06:22 AM

Oh man, that sucks! You've done some really great work so far. I'm sorry you're having to sale the car but I wish you luck.

1transam

05-15-2014, 11:10 AM

I've sold a few cars i didnt really want too, you will be back!

streetbird

05-15-2014, 03:41 PM

I'm waiting a kid in the next days, I will sale my house but I need to fix alot of things, I'll buy a new land to construct a new house.

So I didnt have the choice to sell it.

streetbird

05-24-2014, 11:05 AM

Passenger side closeout was made today, it turned out great
http://i9.photobucket.com/albums/a56/clown73/photo1_zps734c1def.jpg (http://s9.photobucket.com/user/clown73/media/photo1_zps734c1def.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo2_zpsd46d74be.jpg (http://s9.photobucket.com/user/clown73/media/photo2_zpsd46d74be.jpg.html)

streetbird

06-09-2014, 02:44 PM

passenger tub welded
http://i9.photobucket.com/albums/a56/clown73/photo_zps8a1e46ba.jpg (http://s9.photobucket.com/user/clown73/media/photo_zps8a1e46ba.jpg.html)

streetbird

07-04-2014, 02:09 PM

just want too see how it look with z06 wheel.
My friend pass me his spare set

http://i9.photobucket.com/albums/a56/clown73/photo31_zpsd1479d3f.jpg (http://s9.photobucket.com/user/clown73/media/photo31_zpsd1479d3f.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo22_zpsdf5efcc4.jpg (http://s9.photobucket.com/user/clown73/media/photo22_zpsdf5efcc4.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo12_zps679b8121.jpg (http://s9.photobucket.com/user/clown73/media/photo12_zps679b8121.jpg.html)

I read they fit with 1/2 spacers but im not sure about the front 9.5 inch on stock subframe

WSSix

07-04-2014, 03:58 PM

Definitely not a bad look. Are you going to be able to keep the bird now or is it still for sale?

streetbird

07-05-2014, 08:10 AM

Definitely not a bad look. Are you going to be able to keep the bird now or is it still for sale?

Didnt have any serious offers so I remove the add.
I dont need money but I dont have to put on the car for now so I will sell if I got a reasonnable offer but I dont think it will happen.
It just will be longer to finish it, but I have a lot to do before spend big money.
I want to finish the squeleton this summer and epoxy prime it, so the panels wont rust by the time.

By the way, thanks for your interest to the car

streetbird

07-20-2014, 12:33 PM

Does anybody have experience with tig spot weld. I am tired of doing plug welds and my spotwelder is a piece of crap. Does the tig spotweld cup work? Does i need gas to tig spotweld and are they strong? Ive got a 180 amp tig but i never use it

streetbird

07-27-2014, 06:12 PM

Got help from friends this week end and i'm happy with the work done.
We have intalled seats platform, rear cross rail and trunk extention, roof structure, speaker panel, add some weld to the sub connector(I want them solid rock) and I started to work on the trunk hinges but I think I will need a big day to place them correctly

http://i9.photobucket.com/albums/a56/clown73/photo14_zps4c3d8d29.jpg (http://s9.photobucket.com/user/clown73/media/photo14_zps4c3d8d29.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo24_zps66d65738.jpg (http://s9.photobucket.com/user/clown73/media/photo24_zps66d65738.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo32_zpsb19d2b4d.jpg (http://s9.photobucket.com/user/clown73/media/photo32_zpsb19d2b4d.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo52_zps7b5ca85e.jpg (http://s9.photobucket.com/user/clown73/media/photo52_zps7b5ca85e.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo2_zps98420166.jpg (http://s9.photobucket.com/user/clown73/media/photo2_zps98420166.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/photo42_zps4155500b.jpg (http://s9.photobucket.com/user/clown73/media/photo42_zps4155500b.jpg.html)

WSSix

07-27-2014, 08:29 PM

Every time I look at your build thread, I'm blown away with just how much you've had to replace. You're doing great. Keep up the good work.

GMTILT

07-28-2014, 01:10 PM

I have been watching your work and it looks killer !

streetbird

09-26-2014, 08:13 AM

I receive a gift of two LED 7'' headlight.
Dont know for the moment if I like the look due of the size
http://i9.photobucket.com/albums/a56/clown73/IMG_20140926_104949_zps26bc5377.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20140926_104949_zps26bc5377.jpg.html)

Leadfoot1

09-26-2014, 10:06 AM

I had stopped watching a bit since you had it for sale. MAN! Its taking shape!!

If you dont have to sell it and its really the car of your dream, dont sell it cause you dont have the money 'now' as much as youd like. Life is like that for everyone unless your a Millionnaire, the only difference will be when you are done with the project, then, life will still be the same for everyone as it we're before, with its better and lesser moments..... Except you will have your. Bad Ass ride by yourself to keep company and change your mind on spirited driving outings to remember you that you hung it out till the end!

Seriously, i regret a few flips i did for money, if i can give you one bit of advice its to keep working till its done. You are too far into it to quit now. KEEP the wheel under the car if it motivates you as it sure looks killer like that! I could almost hear it run lol!!!!

Those are tight gaps on the doors man,

Nice job!

Lead.

BTW, i bought a 20k miles 6.0L for my turbo build this week, already apart to check it out ( like new inside literally!) paid just 200$ lol!!! Planning a little cam, LS9 or MLS gaskets, roller trunions or an L92 head swap if i get a good deal and stuff like that + Cx racing turbo kit, Woohoo!!!!

streetbird

04-05-2015, 08:44 AM

Ive got a question, I dont have the windshield drip rail anymore. How the roof drip rail lined up. Are they flush with the A pillar bevel?

streetbird

04-13-2015, 08:08 AM

Updates coming soon

WSSix

04-13-2015, 02:45 PM

Sweet!

windycitychev

04-15-2015, 06:46 AM

Updates coming soon

You have one awesome project and even though this is the 1st me seeing the post. I must say I was blown away by your skills even though you said you had none. Again awesome job and glad to hear you didn't sell because no money can compensate for what you have accomplished especially the blood and sweat.

streetbird

04-19-2015, 03:54 PM

Quarter stucture sanded to bare metal and inside the quarter to prime with epoxy.
After removing about 40 times each, I've got the left quarter welded in place, finaly.
****ty dynacorn panel.....

http://i9.photobucket.com/albums/a56/clown73/IMG_20150411_162722_zps46xnxgeu.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150411_162722_zps46xnxgeu.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150411_162733_zps8v0yjeum.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150411_162733_zps8v0yjeum.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150411_181822_zps0pxiazyh.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150411_181822_zps0pxiazyh.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150411_181831_zpswabbqolv.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150411_181831_zpswabbqolv.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150415_093243_zpseprlvj3g.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150415_093243_zpseprlvj3g.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150415_105908_zpsuiclktfp.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150415_105908_zpsuiclktfp.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150417_194438_zpsedqoevkm.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150417_194438_zpsedqoevkm.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150417_205202_zpsvc1ycbj5.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150417_205202_zpsvc1ycbj5.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/IMG_20150419_141552_zpswdv1wi9y.jpg (http://s9.photobucket.com/user/clown73/media/IMG_20150419_141552_zpswdv1wi9y.jpg.html)

WSSix

04-19-2015, 07:17 PM

Very nice, and the fact you did all that sanding by hand instead of sandblasting it impressive. I never would have been that patient and persistent. Good job!

streetbird

04-20-2015, 10:04 AM

Thx for the encouragements.
Second quarter is now welded to.
I cant now remove it to the jig and deplace it where I want

DKz Garage

04-22-2015, 08:03 PM

Coming along nicely....... Great job on all the metal work!

streetbird

04-26-2015, 02:38 PM

Wow, I can move the car out of the garage and clean this messy floor
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150426_170231_zpsvxlop89k.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150426_170231_zpsvxlop89k.jpg.html)

Sonar Chief

04-26-2015, 04:24 PM

Looking good ... looks like a car now :relax: I'm hoping to get my quarters on here after school is out ... mid May? I can't wait, my passenger quarter should be here Wednesday :ups:

I'm right behind you :popcorn2:

Chicken Louie

04-28-2015, 06:28 AM

Great progress!! Lots of good work.

streetbird

04-28-2015, 01:27 PM

And now the roof is welded

http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150428_162342_zpsnwiymlbp.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150428_162342_zpsnwiymlbp.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150429_095406_zpsntfiwbvm.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150429_095406_zpsntfiwbvm.jpg.html)

streetbird

05-03-2015, 06:32 PM

Driver side trunk gape. I need to rework the corner but not that bad
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150503_212642_zpsgraj5kyv.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150503_212642_zpsgraj5kyv.jpg.html)

Ive got a question, I want to fill the roof sail with lead but Im afraid with paint and plastic filler adhesion. Anyone did this ?

streetbird

05-04-2015, 08:15 AM

With the corner reshapedhttp://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150504_111249_zpsv3qx18eu.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150504_111249_zpsv3qx18eu.jpg.html)

Sonar Chief

05-04-2015, 08:18 AM

Looks great .... keep at it and you'll be done :thumbsup:

DKz Garage

05-04-2015, 12:25 PM

Excellent job on the deck lid....better than stock fitment!

Che70velle

05-04-2015, 03:13 PM

Very nice!

Ummgawa

05-05-2015, 12:38 PM

Totally dig a 69 bird.

streetbird

05-15-2015, 06:41 AM

and now the backpanel welded. its now time to work on gaps and try my tig to silicone braze the seam*.
Realy happy

http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150514_142600_zpst3prcl60.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150514_142600_zpst3prcl60.jpg.html)

WSSix

05-15-2015, 11:16 AM

You should be! The car is coming together really well. Keep up the great work and good luck!

streetbird

05-31-2015, 09:43 AM

An other rendering
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150531_123951_zpsw1crkwa9.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150531_123951_zpsw1crkwa9.jpg.html)

WSSix

06-02-2015, 05:44 AM

The slanted eyes are a nice take. I'm glad you're still working on this one.

streetbird

06-03-2015, 10:15 AM

The slanted eyes are a nice take. I'm glad you're still working on this one.

Thanks Trey,
Im happy that someone follow my built :)

streetbird

06-20-2015, 10:46 AM

Mustang bumper
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150620_104648_zpsqrwzx9r4.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150620_104648_zpsqrwzx9r4.jpg.html)
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150620_103045_zpsbtfpatef.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150620_103045_zpsbtfpatef.jpg.html)
I keep the idee from roadster shop project the thruth. I dont have the skills to built a custom bumper so I will mod a similar design bumper. Oh, and i didnt notice that we see two time consumers

WSSix

06-20-2015, 06:56 PM

That's going to look good on there. Are you planning to weld the bolts to the inside so you have a smooth bumper?

streetbird

06-20-2015, 07:59 PM

That's going to look good on there. Are you planning to weld the bolts to the inside so you have a smooth bumper?

Yes, and it will be flush mount and color match

Vince@Meanstreets

06-21-2015, 10:55 PM

I like it....I m glad you didn't sell this car.

streetbird

06-23-2015, 11:27 PM

Thx Vince.
But a little change on the plan again.
Sorry for the Firebird lovers, it will have a camaro front end

Vince@Meanstreets

06-23-2015, 11:38 PM

WSSix

06-24-2015, 12:52 PM

Oh! My heart! You're killing me. How could this happen?

In all seriousness, its your car and you should do what you want. I did like your ideas with the Firebird front end.

Tuske427

06-25-2015, 11:44 AM

Thx Vince.
But a little change on the plan again.
Sorry for the Firebird lovers, it will have a camaro front end

Well, it's your car.... Just remember that by converting to a more common camaro front end your car will become less unique. Styling preferences aside a Firebird is much less common than a camaro and that alone will help it stand out at an event, and then there is all the custom modifications you're doing.

And then there's the cost associated with it (the sheet metal, brackets, fasteners, light fixtures, etc) and time. It'll add to your project and be that much longer before you drive it. there is some wisdom with sticking to the plan.

1transam

06-25-2015, 12:25 PM

Do what you love, it's your money!!! You have to be happy and live with the end results.

streetbird

06-30-2015, 02:36 PM

Thanks guys.
Got my driver side door from dynacorn. Wow my first panel with an almost perfect fit. I think I did a nice job on m'y quarter fitment too.

http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150630_172006_zpskk144cbr.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150630_172006_zpskk144cbr.jpg.html)

streetbird

08-09-2015, 07:34 AM

Front rs conversion
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150718_102055_zpslv4y5siz.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150718_102055_zpslv4y5siz.jpg.html)
Pick up an lq4
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150724_152047_zpsy2rdic5z.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150724_152047_zpsy2rdic5z.jpg.html)

CamaroJesse

08-31-2015, 07:42 PM

I just ran across your build. Very nice work so far. I feel you on changing the front end to a camaro. I too was looking for a camaro but ended up with a 67 firebird. I'm going to modify my front end to be a cross between camaro and firebird. I can't wait to see your car continue to come together!

Leadfoot1

09-01-2015, 03:30 AM

Woah there buddy!!!!!

How did i miss out on this story about the front end swap!!?? I didnt get the updates until the last post before mine!!

And i see its already bought and on!!!??

Are you seriously going to HALF ASS IT!!??? Like the others... I get it, but if your just going to drop a front end on it, not do the dash, the tail panel, and correct the 1/4's.... Im not with you on this one. Sorry.

Just think about what YOU do when at a show and you see a car like your about to build.... You do a double take, shake your head and move on thinking.... "That guy didnt have the money to build a Camaro so he built a Firebird...."

Im sorry, but you know im right. And im also with the others.... You CHOSE a Firebird for its Uniqueness, and now your bastardizing it!!

I mean, yeah its your car.... Just, dont you like it??

Sorry man, i just think this is a "think it throughly" thing. I like the fact Vince put YOUR drawing back in your face. ... 'Say's a lot.

Funny i hear from you too, i got your number out Sunday and wanted to call but we went to the hospital instead.... Long story.

Anyway, keep it up and do what you feel is right!! (Of course!) And also, sure i understand the other side too.... Beeing a Camaro guy this is the easy part!! But the value (project spirit wise and financially) of all youve done trumps the "want" factor for me in this case. I could not understand having done all this and doing it only to half its worth. Your not going to have a Camaro... Nor a Firebird!!!

At least if you decide to do it all the way .... We could get it licenced as a Camaro...

Ok.... :topic: But....:bitchslap: Im not convinced.

Just so you know!!

Take care buddy,

AND I WILL DROP BY (are you free some time this w-e?... Im pulling the body off the 55 on friday but good sat and sun, let me know!!) but NOT with the Camaro... I know youll want to compare measurements LOL!!!!!! ...kidding....

Let me know,

M.

streetbird

09-01-2015, 11:54 PM

I understand your point Mario but I like the Firebird tail light and to me its the same car. People in quebec already piss on pro touring car so they will hate anyway.
Im not a show guy, im more horrified to see ugly gaps on cars in the expos than a mixed car and this is what we see here.

Sonar Chief

09-02-2015, 08:37 AM

You are doing a great job on YOUR car!!! Customizing is a tricky thing ... just remember if you want to sell it down the road is must appeal to the senses!

Michael

streetbird

09-02-2015, 09:37 AM

Im sorry

http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150821_143045_zps3mbh6ung.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150821_143045_zps3mbh6ung.jpg.html)

streetbird

10-05-2015, 10:29 AM

No updates for the moment but I bought my son's first car mouhahah
http://i9.photobucket.com/albums/a56/clown73/Mobile%20Uploads/IMG_20150821_081016_zps0edav1hd.jpg (http://s9.photobucket.com/user/clown73/media/Mobile%20Uploads/IMG_20150821_081016_zps0edav1hd.jpg.html)

WSSix

10-07-2015, 11:08 AM

Awesome!

waynieZ

10-07-2015, 03:31 PM

Brake him in right!

Leadfoot1

05-16-2016, 07:36 PM

Hey everyone,

As sad as this is gonna sound. The project is now officially on ice...for good.

A lot of parts have made their way onto it since last updates tough....(it now is a almost complete, 100% new panel car) with the whole front end and latch system, rad support etc. ----No GM panels on this car lol!!----

Its beeing put together as a performance "roller" with great suspension parts and to be offered for sale by end of week.

I also have a LOT of parts available and also a multitude of ways it could be sold. (From a empty shell to complete driving)

Car is now shelled as a COMPLETE '69 Camaro now but, beeing 100% new has no title, (yes, bill of sale will be offered and also about an inch and a half thick of EVERY bill that went into this build...) so at this point, its to be considered as a Dynacorn body, altough, a much tighter one, and one thats ALREADY DSE mini tubbed, DSE Frame connectored, and also frame notched and metal finished.

A LOT of work was put to make this car as nice as possible and you can see it from looking at the past pages.

Im good friends with Streetbird and will sadly be taking care of the sale. Im making this public and official as to make sure there are no questionning or missunderstandings. Any and all questions should as such, be directed to me. I am putting all the extra parts and time in the project to help finish the car to a selleable point and will make sure if it sell's that everything goes well and is done in a timely manner.

I will put an official add in the for sale section but wanted to let you guys know, also so it would pull a bit of traffic for the sale.

A lot of you may know me already from past projects, altough i have not been on here a lot lately (been drag racing!) but i also have sold quite a bit of hard core parts and have solid references.

This is a GREAT and EXTREMELY solid project for the perfect start Camaro your envisionning!!! Dont miss out on your chance to get an screaming deal!!

Ad to come by end of week with up to date pictures.

Meanwhile, please pm me for any details.

Thanks guy's,

Lead.
(Mario)