View Full Version : front backspace
usa-69z
05-15-2013, 07:04 PM
New rims are here ! Im curious to what backspace guys are running up front.. The back space i ordered are virtually flat ,, I did use same measurements from my last set of rims ,, they work fine but the look is mmmmmmm:shakehead:
I ordered my fronts with 4.75 b/s 245/40/18 and there virtually flat (no dish),, not diggin the look to much. I have speedtech front upper and lower A arms with coilovers..
could i have gotten more dish up front?
what are others running?
RENN SCHNELL
05-15-2013, 08:17 PM
I assume you have an 8.0" wide wheel?
What brake package and hubs are you using?
usa-69z
05-15-2013, 09:07 PM
I assume you have an 8.0" wide wheel?
What brake package and hubs are you using?
8 inch rim with standard disc/calipers,,
MarkM66
05-16-2013, 03:31 AM
What wheels?
Sounds like they made them with a thick pad. To clear the calipers.
How much room is there between the wheel and the caliper?
I agree, I'm not a fan of that look.
usa-69z
05-16-2013, 04:46 AM
Mark , i havnt fitted the fronts up yet as im working on a 4 link rite now..
after some research im seeing that the 'tru turn' system from ride tech seems to offer an alternative,,..the only thing im not a fan of is the 2 inch drop spindles you must run,,, dosnt that move the lower A arm much closer to the road? i really need to get some dish up front... What wheels?
Sounds like they made them with a thick pad. To clear the calipers.
How much room is there between the wheel and the caliper?
I agree, I'm not a fan of that look.
craig510
05-17-2013, 07:47 AM
I guess I'm out numbered here but I don't like deep dish rims. It puts a bunch of extra load on the lip of the rim for no good reason. Depending on the offset it will force a compromise on scrub radius and puts additional bending stress on the bearings.
Rybar
05-17-2013, 03:20 PM
Yeah your front Fikse wheels with those specs will not have a big lip on them. It's just the way they are. Look at mine they are the same.
usa-69z
05-17-2013, 08:08 PM
yep Ryan , we are in the same boat with this,,the tru turn system sounds interesting , but as mine is right hand drive im not sure about fitment..and drop spindles im not a fan of..
Yeah your front Fikse wheels with those specs will not have a big lip on them. It's just the way they are. Look at mine they are the same.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.