srh3trinity
04-13-2013, 03:01 PM
Here are some more parts that I have amassed that I won't be using.
I have a set of LS3 lifters in good shape. They are used and I got them with a pullout cam I bought. $65 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130205_205855_zps2634e6ab.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130205_205855_zps2634e6ab.jpg.html)
LSx pushrods that I got with some rocker arms I bought. They are in good shape, but there are ONLY 14 $20 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130205_205453_zps5c4c1326.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130205_205453_zps5c4c1326.jpg.html)
Dynatech LS1 67-69 Camaro swap headers. These were bought off of the board here from a member who had them on the car for about a year. No dents, they do have a few scratches and minimal surface rust, but the coating is in good shape. They will not work on my second gen car with an AFTERMARKET subframe, but several folks have used them on stock subframe 1st and 2nd gen swaps. I am just trying to get my money back out of them and will take a little bit of the shipping hit at $275.00 shipped.
http://i838.photobucket.com/albums/zz302/srh3trinity/20130307_154956_zpse6fce626.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130307_154956_zpse6fce626.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20130307_155004_zps89475f45.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130307_155004_zps89475f45.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20130307_155049_zps1fdf4505.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130307_155049_zps1fdf4505.jpg.html)
2004 GTO PS pump. The spacing will work with GTO and F-body accessory brackets. You will need an 04 GTO bracket for this pump as the bracket is different than the 05-06 GTO and the F-body $65.00 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130219_152453_zps1b97c189.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130219_152453_zps1b97c189.jpg.html)
Brand new Sanden 508 AC Compressor with 7 rib pulley. This will work if you are going to mount the AC Compressor up high on an LS swap. It won't work if you use a low-mount F-body bracket as the hose hookups come off the back and interfere with the motor mount. Again, perfect for a Kwik bracket or a high mount bracket. $125.00 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130205_210038_zpse58e74ba.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130205_210038_zpse58e74ba.jpg.html)
I am going to have to look at home, but I am pretty sure I have most of an LS1 F-body or GTO accessory bracket setup that I will list up on Monday.
I work out of town every other week and I am coming up on my off week, so if you want to buy and me get things shipped out, let me know this week. Otherwise, there may be some delay in getting stuff out.
I have a set of LS3 lifters in good shape. They are used and I got them with a pullout cam I bought. $65 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130205_205855_zps2634e6ab.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130205_205855_zps2634e6ab.jpg.html)
LSx pushrods that I got with some rocker arms I bought. They are in good shape, but there are ONLY 14 $20 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130205_205453_zps5c4c1326.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130205_205453_zps5c4c1326.jpg.html)
Dynatech LS1 67-69 Camaro swap headers. These were bought off of the board here from a member who had them on the car for about a year. No dents, they do have a few scratches and minimal surface rust, but the coating is in good shape. They will not work on my second gen car with an AFTERMARKET subframe, but several folks have used them on stock subframe 1st and 2nd gen swaps. I am just trying to get my money back out of them and will take a little bit of the shipping hit at $275.00 shipped.
http://i838.photobucket.com/albums/zz302/srh3trinity/20130307_154956_zpse6fce626.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130307_154956_zpse6fce626.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20130307_155004_zps89475f45.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130307_155004_zps89475f45.jpg.html)
http://i838.photobucket.com/albums/zz302/srh3trinity/20130307_155049_zps1fdf4505.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130307_155049_zps1fdf4505.jpg.html)
2004 GTO PS pump. The spacing will work with GTO and F-body accessory brackets. You will need an 04 GTO bracket for this pump as the bracket is different than the 05-06 GTO and the F-body $65.00 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130219_152453_zps1b97c189.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130219_152453_zps1b97c189.jpg.html)
Brand new Sanden 508 AC Compressor with 7 rib pulley. This will work if you are going to mount the AC Compressor up high on an LS swap. It won't work if you use a low-mount F-body bracket as the hose hookups come off the back and interfere with the motor mount. Again, perfect for a Kwik bracket or a high mount bracket. $125.00 shipped
http://i838.photobucket.com/albums/zz302/srh3trinity/20130205_210038_zpse58e74ba.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130205_210038_zpse58e74ba.jpg.html)
I am going to have to look at home, but I am pretty sure I have most of an LS1 F-body or GTO accessory bracket setup that I will list up on Monday.
I work out of town every other week and I am coming up on my off week, so if you want to buy and me get things shipped out, let me know this week. Otherwise, there may be some delay in getting stuff out.