Jack Maurer's Camaro "Darkside"

[GregWeld]

I'm starting this thread for Jack.... so I can post pics of his newly created '69 Camaro. Jack built the '65 Mustang Track car that I bought from Charlie - after Charlie bought it from Jack...

I'll let Jack post up his descriptions etc == I'm just getting this started for him is all.






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-14.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-15.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-16.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-18.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-17.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-19.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-20.jpg

[Jack Maurer]

Thanks Greg for posting the pics

[intocarss]

Damn that's nice :thumbsup: :thumbsup: :thumbsup: :thumbsup:

[GregWeld]

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/Jacksposter.jpg

[Jack Maurer]

LS7 built by Brian Thomson; 612hp on the motor, 541hp at the rear wheels. Decided to go with a 950 cfm carburator for the "old school" look, but if I had to do it over again I would have stayed with fuel injection. Stainless headers by Lemons; Burns Stainless collectors with 3" exhaust thru Magnum mufflers. Trans is a Tremec Magnum 6 speed behind a McLeod dual disk clutch. Inland aluminun drive shaft to a Strange 9" with 3.70 gears. Suspension and brake info to follow

[cantcatchmitch]

Awesome build!

[Swain]

Very nice, love the interior..

[214Chevy]

Thanks for sharing Greg. Jack's car is beautiful. Not too wild or over board...simple and classy.

[GregWeld]

Thanks for sharing Greg. Jack's car is beautiful. Not too wild or over board...simple and classy.



That's what drew me to it at the GNRS.... it was a "hey -- look at that sweet '69"... and I like Jacks description of "less is more". Bad ass without the look at me.

If you see Jacks builds in person -- you'd understand his attention to detail and quality. It's why I bought his race car --- one look --- you're hooked! :lol: Well -- that and Charlie was giving it away. :bitchslap:

[Flash68]

Jack, great car! :thumbsup:

[camcojb]

Yes, you can be assured if you buy a car from Jack that it's going to be NICE!!!!!!!!! :hail:

[GregWeld]

More pics of the build.........






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-1.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file.jpg





http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-2.jpg





http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-3.jpg





http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-5.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-4.jpg

[GregWeld]

Jack --- Is the color of the firewall etc "hot rod black"???

[Ns RS]

post count most count looks like a great project keep em coming

[DaleTx]

Incredible car all around… the interior is one of the nicest designs I’ve seen in a 69… The dash is perfection… so nice.

The engine looks great also.

:thumbsup:

[Jack Maurer]

Interior was done by Pete Engle of Wesminister Interiors, Anaheim, CA; pretty much left it up to Pete for the design and selection of materials.

[Sieg]

WOW! Definitely adds clout to the "less is more" theory.

Nice work Jack.

EFI would be too easy and besides everybody has it now.......the carb looks awesome on that motor. :thumbsup:

[Jack Maurer]

Color is just a semi-gloss black.....same black as you see in all the pics; very durable; you can wipe it down with brake parts cleaner.....almost as durable as powdercoat. The same semi- black as used on Greg Weld's 65 Mustang. Painter is Quigley's Auto body, Lake Forest, CA.

[coolwelder62]

Wow!!! Aweosme build.Everything is perfect.

[Rybar]

Wow!!! Aweosme build.Everything is perfect.

I agree. Looks fantastic. Of couse I love the wheels. :D

[bentfab]

Yeah that car was bitchen! It caught my eye at the show. Got a couple pics on my cell phone of the engine bay. Super clean and simple! I have a 69 in the shop write now that is pretty much a mirror image of this car except it will have an LSA in it.

Mark

[Ron in SoCal]

Interior was done by Pete Engle of Wesminister Interiors, Anaheim, CA; pretty much left it up to Pete for the design and selection of materials.

When I saw the car in person I wrote down the name of the interior shop. Looks so clean! Nice job Jack! :thumbsup:

[tones2SS]

Wow, great looking car. As the others, I love the interior.
Great job Jack.

[ChuckDriver]

Has to be the nicest Camaro I've ever seen!

[Jack Maurer]

Thank you all for the kind comments, much appreciated. With the project done, time to have some fun showing and driving Darkside.

[Matt@BOS]

Jack, Gregg (owns the almost black, extremely dark blue Camaro built at Best of Show) told me how cool this car was after he ran into you at Cars and Coffee. I've been hoping to see it ever since. Great attention to detail. Everything looks immaculately placed and detailed!

Hope to see it on the road soon,

Matt

[Jr]

I love the less is more theme. This is a very clean 69. What media blaster did you use?

[Jack Maurer]

Car was stripped via walnut shell blasting, but ultimately ended up replacing a lot of the sheet metal with NOS or original sheet metal; doors, fenders, hood and trunk lid are all original GM. Dispite using the best sheet metal available, considerable time was expended getting the best possible fit.....this was the most challenging project to date and pretty sure it will be the last.

[Jr]

Jack,
Did you use a media blaster in Southern California?

[Jack Maurer]

Yes, I used a media blaster in Orange, CA...Orange County Sandblasting 714 453-4633.

[Jr]

Sir,
Thank you. Again, beautiful car.

[WSSix]

Fantastic looking car. :thumbsup:

[tmadden]

I'm starting this thread for Jack.... so I can post pics of his newly created '69 Camaro. Jack built the '65 Mustang Track car that I bought from Charlie - after Charlie bought it from Jack...

I'll let Jack post up his descriptions etc == I'm just getting this started for him is all.






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-14.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-15.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-16.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-18.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-17.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-19.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-20.jpg



Outstanding. Simple elegance!!!!

[tmadden]

WOW! Definitely adds clout to the "less is more" theory.

Nice work Jack.

EFI would be too easy and besides everybody has it now.......the carb looks awesome on that motor. :thumbsup:

So true!

[Stuart Adams]

Awesome car. Love it.

[snappytravis]

I love the looks of the classic muscle car, then you look closely, suspension, brakes, engine, trans, wheels, Enjoy the Darkside!
:thumbsup:

[GregWeld]

Okay -- got some more detail pics from Jack to post so here goes....






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-6.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-7.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-9.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-10.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-8.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-13.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-12.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-11.jpg

[GregWeld]

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-2.jpg

[fleetus macmullitz]

V-e-r-y nice...wow! :thumbsup:

[James OLC]

Brilliant!

[Lenie]

She's a real beaut! Nice work.

[Tom.A]

Awesome and I would not want to change a thing:bow:
Not to get off topic but how high is your garage? I am guessing it is 9 or 10'.
I am thinking about a lift at my new house for car storage but I only have 9'

Thanks

[FathomGreen69]

Verry classy, simple yet beautiful, pure in form and function. Reminds one of the mule. :thumbsup:

[Al Moreno]

I saw the it at GNRS with two of my boys and told them "this is how I would build a 69", Beautiful car!

[coolwelder62]

:G-Dub: Perfect PT build.

[Jack Maurer]

Verry classy, simple yet beautiful, pure in form and function. Reminds one of the mule. :thumbsup:

Yep, it was Charlie and his Mule that made me do it.....Charlie was actually a big help. In addition, Mark Steilow had a huge influence on how Darkside was built.

[Frankenstine]

Very Nice Build, Very Clean, Just perfectly done, Question For you Jack,
What product was used on the underside, I like the clean look, doesn't look like an under coater with a texture from the pictures, Thank you for the insperation. :thankyou: Keith

[Jack Maurer]

Very Nice Build, Very Clean, Just perfectly done, Question For you Jack,
What product was used on the underside, I like the clean look, doesn't look like an under coater with a texture from the pictures, Thank you for the insperation. :thankyou: Keith

The entire underside, including wheels wells are just painted semi-black; thinking about shooting the wheel wells with lizardskin.

[mdprovee]

Gorgeous car Jack, amazing work. Would love to see it in person someday.

[Richio1]

Awesome! Very well done sir. :thumbsup:

[Jack Maurer]

Gorgeous car Jack, amazing work. Would love to see it in person someday.

You are welcome to come over and see the car anytime.

[GregWeld]

This is some aero work on Jacks race car....







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-24.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-27.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-25.jpg







And some whoa power to go with the go power.......







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-23.jpg

[Sieg]

Nice stuff Jack. :thumbsup:

What are your favorite tracks for that pony?

[tubbed69]

That is one nice clean Camaro,great job.

[GregWeld]

BTW --- Jacks late model Mustang runs circles around Charlie and my "old vintage iron"... his tires are twice as wide -- the car is all aero -- big down force wing - more horsey power... :G-Dub:

It sounds and looks awesome on the track.

[waynieZ]

Beautiful Car!

[randy]

tell me more about the brake booster and master cylinder please. I love the clean factory look. How well would it work with a c6 z06 front and rear caliper and rotor setup?

Any details would be great. Performance, part #s, work involved, opinion, and would u use it again or go a different route?

[aany001]

Whos gauges are those? This thing is beautifully done !!!!!!!!!!!
Love everything about it and would'nt change a thing!!!:cheers:

[RandyM]

Awesome looking car. Beautifully executed. Everything a pro-touring car should be.

May I ask what the arming switches are used for on the lower left dash panel next to the lights and wiper switch? Thanks.

[Jack Maurer]

tell me more about the brake booster and master cylinder please. I love the clean factory look. How well would it work with a c6 z06 front and rear caliper and rotor setup?

Any details would be great. Performance, part #s, work involved, opinion, and would u use it again or go a different route?

The brake booster is from Detroit Speed and should work fine with the ZO6 brake setup.

[Jack Maurer]

Whos gauges are those? This thing is beautifully done !!!!!!!!!!!
Love everything about it and would'nt change a thing!!!:cheers:

I found a source for the gauges that allows you to design the face of the guages just about anyway you want. In addition, you can select the style of the guage bezel. The guage internals are autometer.

[Jack Maurer]

Awesome looking car. Beautifully executed. Everything a pro-touring car should be.

May I ask what the arming switches are used for on the lower left dash panel next to the lights and wiper switch? Thanks.

One of the switches is for the fuel pump and the other switch is for the cooling fans.

[aany001]

I found a source for the gauges that allows you to design the face of the guages just about anyway you want. In addition, you can select the style of the guage bezel. The guage internals are autometer.

How do I get in touch with them? What is their web site? Thanks and I love the car!!!

[Jack Maurer]

How do I get in touch with them? What is their web site? Thanks and I love the car!!!

Contact Mark Surel at New Vintage USA. 248 259-4964. Website: www.newvintageusa.com

[aany001]

Thanks for the link Jack

[Jack Maurer]

Nice stuff Jack. :thumbsup:

What are your favorite tracks for that pony?

Has to be Sonoma (Sears Point). Considered a "technical" track, but I like the variety of turns and elevation changes; plus the location in the wine country is perfect. Laguna Seca is a close second, but my car can not make the very restrictive sound limitations. Thunderhill is the most user friendly and best for new drivers; minimal concrete barriers and plenty of runoff area. Autoclub speedway incorporates a road course that includes about 2/3 of the high speed oval. Running the high speed oval is a lot of fun. Willow Springs, called the fastest tract in the West is challenging and you can really mess up your car if you get off track; plus the wind and sand blows a lot.

[bentfab]

Hey Jack,

Wanted to ask if you had to clearance the trans tunnel for the 6 speed?

Mark

[Jack Maurer]

Hey Jack,

Wanted to ask if you had to clearance the trans tunnel for the 6 speed?

Mark

Yes, the entire top of the tunnel was raised from the firewall to just behind the shifter

[bentfab]

That's what I thought. Thanks

I stood and stared at your car for a while at the show. Just my style simple, effective and bad A$$!

one more thing. Is the radiator core support stock and cleaned up or aftermarket?

Mark

[Sales@Dutchboys]

Very nice car! great work. Do you remember what valve covers/coil mounts you used? I like those, would look great on a project I have in mind.

[Jack Maurer]

That's what I thought. Thanks

I stood and stared at your car for a while at the show. Just my style simple, effective and bad A$$!

one more thing. Is the radiator core support stock and cleaned up or aftermarket?

Mark

The support is after market; aluminum painted to resemble stock

[Jack Maurer]

Very nice car! great work. Do you remember what valve covers/coil mounts you used? I like those, would look great on a project I have in mind.

Valve covers and coil mounts and plug wires are from Katech www.katechengines.com
586-791-4120; located in Michigan

[GregWeld]

And a few more details....






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-31.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-28.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-29.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-30.jpg

[GregWeld]

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-32.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-33.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-34.jpg

[ChuckDriver]

More pic's PLEASE!

[GregWeld]

A nice spindle shot of Jacks '07 Mustang track car....






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-35.jpg

[GregWeld]

You find that title yet?? :bitchslap: :lol:

[Jack Maurer]

You find that title yet?? :bitchslap: :lol:

Still looking....I know I have it. I WILL find it

[intocarss]

This thread is pure SEXY!!:D

[Stuart Adams]

Jack, perfect name for your car. Kick asp car. Great parts also. Congrats.

[Jack Maurer]

Jack, perfect name for your car. Kick asp car. Great parts also. Congrats.

Thank you Stuart

[GregWeld]

And an interior shot of Jacks '07 Mustang track car....






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-36.jpg

[Stuart Adams]

Badd.

[nicks67ca]

Great stuff. Thanks for sharing.

Which came first the Ford or the Chevy:)

[coolwelder62]

Mustang is WAY COOL.:G-Dub: :G-Dub:

[clill]

Still looking....I know I have it. I WILL find it

LOL...He has been saying that for years. That's why I unloaded that POS.:lmao:

[Jack Maurer]

Great stuff. Thanks for sharing.

Which came first the Ford or the Chevy:)

The 07 Mustang came first. Darkside was started in May 2009 and completed in October 2012 and is the fifth build I have done over the past 20 years.

[Sieg]

Am I the only Chevy guy wanting to see engine compartment pics of that Mustang? :sieg:

[mdprovee]

Am I the only Chevy guy wanting to see engine compartment pics of that Mustang? :sieg:

Nope, me too. I had the pleasure of meeting Jack at a track day at Thunderhill, with Greg and Charley. He builds great cars.

[GregWeld]

Am I the only Chevy guy wanting to see engine compartment pics of that Mustang? :sieg:




FINE........





http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-37.jpg









But this one is waaaaaayyyyyy mo' pretty!!! (IMHO):hello:








http://i919.photobucket.com/albums/ad33/gregweld/65%20Mustang%20Track%20car/016.jpg

[Jay Hilliard]

Congrats Jack on a super clean 69, that is superbly detailed. So well done as others have stated. I love the console.

Thanks Greg for sharing the pics.

[Jr]

FINE........





http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-37.jpg









But this one is waaaaaayyyyyy mo' pretty!!! (IMHO):hello:










Is the rubber hose on the end of the air intake brake ducting? Where can I buy that hose?

[Jack Maurer]

Is the rubber hose on the end of the air intake brake ducting? Where can I buy that hose?

The hose connects to a K&N air filter. Kenny Belll strongly believes locating the source of intake air out of the hot engine bay area. There are brake cooling ducts, but you can not seem them in this pic.

[DaleTx]

Jack... on the Camaro, I noticed that you built a custom cold air intake for the single plane carb set up. It looks like it draws cold air in from the back of the cowl induction hood rather than from above. Does that work pretty well?... it looks very clean. I have not seen one set up that way before. I was wondering if you made modifications to the underside of the hood or left it stock.

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-16.jpg

[Jack Maurer]

Jack... on the Camaro, I noticed that you built a custom cold air intake for the single plane carb set up. It looks like it draws cold air in from the back of the cowl induction hood rather than from above. Does that work pretty well?... it looks very clean. I have not seen one set up that way before. I was wondering if you made modifications to the underside of the hood or left it stock.

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-16.jpg

Yes the underside of the hood was modified to accommodate the the air cleaner assembly. All the air for the intake comes from the back cowl area; I wanted it work like a true cowl induction intake.

[David Pozzi]

Beautiful work Jack. I hope to meet up with you some day. Who makes he instruments on the 69?

[GregWeld]

Well Jack is managing to add to my post count -- but HE is the new post whore on Lat G.... I'm just doing the dirty work. :thankyou:




http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-42.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-40.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-39.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-38.jpg

[Jack Maurer]

Beautiful work Jack. I hope to meet up with you some day. Who makes he instruments on the 69?

Thank you Dave; I have great admiration for you and Mary for all you have contributed to protourong. For the instruments please Contact Mark Surel at New Vintage USA. 248 259-4964. Website: www.newvintageusa.com. This source allows you to design the gauge faces just about any way you want them. All the gauge internals are autometer.

[Sieg]

FINE........

But this one is waaaaaayyyyyy mo' pretty!!! (IMHO):hello:

FINALLY! Prettiest girlfriend I had was similar fun to lapping Laguna Seca in a peddle car. :sieg:

[GregWeld]

Jack has a tough life....


Not sure if he's dating the girl in the middle.... or whether or not Beth approves??? Or exactly what the "relationship" is???


MAYBE THIS IS THE REAL DEFINITION OF "SPEED DATING"??:D :popcorn2:






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-43.jpg

[KPC67]

Yeah i'd say pretty tough all right.
That looks like Courtney Hansen off of the old overhaulin' shows.:angel:

[GregWeld]

Yeah i'd say pretty tough all right.
That looks like Courtney Hansen off of the old overhaulin' shows.:angel:




WE'VE GOT A WINNER!!! <ding ding ding ding>






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-44.jpg

[Jack Maurer]

Yeah i'd say pretty tough all right.
That looks like Courtney Hansen off of the old overhaulin' shows.:angel:

Correct. Courtney Hnsen is hosting a new car show titled Private Concourse Challenge and Darkside will be in the first episode

[snappytravis]

I looked at this car two days ago, just had to look at it again, ya I dig it!

[JohnC]

Correct. Courtney Hnsen is hosting a new car show titled Private Concourse Challenge and Darkside will be in the first episode

Very cool, Jack. What channel will it be on? Any air date yet? Congratulations on being the first episode...:popcorn2:

John

[Jack Maurer]

Very cool, Jack. What channel will it be on? Any air date yet? Congratulations on being the first episode...:popcorn2:

John

Don't know yet; still putting together the advertisers.

[GregWeld]

The production crew.....




Or is it Motley Crew?? :lol: :lol:






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-45.jpg

[KPC67]

WE'VE GOT A WINNER!!! <ding ding ding ding>






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-44.jpg

What can I say!
I do have an eye for... talent.

[GregWeld]

Let's take a poll ---


1) Was Jack just being socially polite?



2) Was Jack trying to loosen her up??



Which pics do we want to see more of?


A) Jacks Mustang?

B) Jacks Camaro?

C) Courtney?







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-47.jpg

[Ron in SoCal]

2 and C

[GregWeld]

2 and C





:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-48.jpg

[GregWeld]

Overwhelming votes are in -- MORE COURTNEY!!






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-49.jpg

[Jack Maurer]

We mutually agreed that Darkside was too much for her and there was no way I could handle her, so we went back to or respective rides.

[Jack Maurer]

[SIZE="4"]Overwhelming votes are in -- MORE



http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-49.jpg

you gotta luv those driver shoes

[GregWeld]

Okay.... this IS (was??) a car forum.... so here's some obligatory Camaro stuff.







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-51.jpg

[Sieg]

What? No pics of the not so ordinary Ford Blue Hair with Heals Hoots and Tats...... :censored: ?

[Jack Maurer]

What? No pics of the not so ordinary Ford Blue Hair with Heals Hoots and Tats...... :censored: ?

Stay tuned for more pics

[GregWeld]

What? No pics of the not so ordinary Ford Blue Hair with Heals Hoots and Tats...... :censored: ?



Son of a Beach...... you guys think all I have to do is be Jacks pic posting beach??






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-52.jpg

[Sieg]

Stay tuned for more pics
:cheering:

She might be naughty.........or is it just me. :sieg:

[Sieg]

Son of a Beach...... you guys think all I have to do is be Jacks pic posting beach??


Considering it sharing in a mutually beneficial way. :thankyou:

[Jack Maurer]

Son of a Beach...... you guys think all I have to do is be Jacks pic posting beach??






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-52.jpg

Okay, Greg I won't ask you post anymore pics......I have very much appreciated all your help.....it has been a lot fun.

[GregWeld]

Okay, Greg I won't ask you post anymore pics......I have very much appreciated all your help.....it has been a lot fun.




Send all ya got Jack -- I have nothing else to do..... in case you couldn't tell by my post count. :D

[Sieg]

Send all ya got Jack -- I have nothing else to do..... in case you couldn't tell by my post count. :D
Jack, he's just kidding. Just give him one of these :bitchslap: and send him some more photo's please! :thumbsup:

[GregWeld]

Jack, he's just kidding. Just give him one of these :bitchslap: and send him some more photo's please! :thumbsup:



Don't you have some sore balls to tend to???

[snappytravis]

Okay.... this IS (was??) a car forum.... so here's some obligatory Camaro stuff.







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-51.jpg

Nice, hot chick, then a dyno sheet!!

[GregWeld]

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-56.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-58.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-57.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-55.jpg

[Sieg]

There are so many tastefully done details in this Camaro that make it quite unique. It looks like a real comfy distance runner too. :thumbsup:

Jack - With the 3.89 rear ratio, are you running a close or wide ratio T56?

[GregWeld]

Nice, hot chick, then a dyno sheet!!






Which one turns your crank more??


At my age -- it could be a toss up....:action-smiley-027: :D

[Jack Maurer]

There are so many tastefully done details in this Camaro that make it quite unique. It looks like a real comfy distance runner too. :thumbsup:

Jack - With the 3.89 rear ratio, are you running a close or wide ratio T56?

I miss stated the gear ratio; it is actually 3.70. Basically, I rarely get into fifth and sixth gear. Trans was built by D & D Transmissions

[intocarss]

Let's take a poll ---


1) Was Jack just being socially polite?



2) Was Jack trying to loosen her up??



Which pics do we want to see more of?


A) Jacks Mustang?

B) Jacks Camaro?

C) Courtney?








1

2

B

C


:popcorn2:

[Jack Maurer]

There are so many tastefully done details in this Camaro that make it quite unique. It looks like a real comfy distance runner too. :thumbsup:

Jack - With the 3.89 rear ratio, are you running a close or wide ratio T56?

Seats and frames were modified in order to get the seat as low as possible; yes they are comfortable and offer pretty good support. I used to run the same seats in what is now Greg Weld's 65 Mustang for track events, but later changed over to a Sparco seat.

[KPC67]

Are they a procar seat?
They look nice..

[Jack Maurer]

Are they a procar seat?
They look nice..


Yes they are procar seats

[Jack Maurer]

Yes they are procar seats

The selection of seats was another decision that took awhile. Recaros are very nice, expensive and the shape of the Recaros just did not work with the look I wanted. The Procar seats have been reshaped a bit along with cutting down the height of the headrest. The rear seat is the original stock frame, but built up to have a similar look and shape to the front seats. The interior complete was $7,500.

[camcojb]

so, here's the big question. Are you going to take this on Power Tour this year with Charley? :peepwall:

[Jack Maurer]

so, here's the big question. Are you going to take this on Power Tour this year with Charley? :peepwall:

The power tour was one of the reasons the car was built, but Charley has not shown any interest in doing the power tour with me. I think he is still mad about not getting the title for the 65 Mustang I sold him back in 2007 that is now owned by Greg Weld. Now that I found the vin tag and mailed it to Greg, maybe Charley, once he gets more $$$ from Greg will want to renew the friendship.

[camcojb]

The power tour was one of the reasons the car was built, but Charley has not shown any interest in doing the power tour with me. I think he is still mad about not getting the title for the 65 Mustang I sold him back in 2007 that is now owned by Greg Weld. Now that I found the vin tag and mailed it to Greg, maybe Charley, once he gets more $$$ from Greg will want to renew the friendship.
:lol: You will have a blast if you go. I remember you wiping down the Mustang top and bottom after each session on the track. You may have to let the underneath go until you get home from the Tour. :thumbsup:

[GregWeld]

The power tour was one of the reasons the car was built, but Charley has not shown any interest in doing the power tour with me. I think he is still mad about not getting the title for the 65 Mustang I sold him back in 2007 that is now owned by Greg Weld. Now that I found the vin tag and mailed it to Greg, maybe Charley, once he gets more $$$ from Greg will want to renew the friendship.



That's not likely to happen Jack. The first night at dinner at Casa Ramos... you were out and I was in.


On the '65 Mustang -- I figure HE owes me a motor... and a transmission... and a set of tires... and a toter home... as well as a title.


He's never invited me on Power Tour either... because I can only be taken in small doses and the thought of me hanging around for 9 days gives him shrinkage. :warning: :D
Just wait til I have a driver follow me on the PT with "the rig" and I have comfy quarters to sleep in every night - my bbq fired up - and the big screen on... car comfortably parked in the garage every night... HA!

[CrossRamRich]

That's not likely to happen Jack. The first night at dinner at Casa Ramos... you were out and I was in.


On the '65 Mustang -- I figure HE owes me a motor... and a transmission... and a set of tires... and a toter home... as well as a title.


He's never invited me on Power Tour either... because I can only be taken in small doses and the thought of me hanging around for 9 days gives him shrinkage. :warning: :D
Just wait til I have a driver follow me on the PT with "the rig" and I have comfy quarters to sleep in every night - my bbq fired up - and the big screen on... car comfortably parked in the garage every night... HA!

Greg, I have a Class A DL, I'm a grillin' Guru, and I never hog the remote for the big screen. Just need room for my cooler!:idea: I think Melissa can do without me for nine days. :idea:

[Ron in SoCal]

^ I can vouch for the cooler part...:D

Ok, I'll admit he's a pretty good dude too :thumbsup:

[GregWeld]

Greg, I have a Class A DL, I'm a grillin' Guru, and I never hog the remote for the big screen. Just need room for my cooler!:idea: I think Melissa can do without me for nine days. :idea:




:lol: :lol: :lol: :lol: :lol:



Okay -- You do know that I've been a member of AA for like 28 years now.... Just sayin' -- we could have a meeting each morning... and again in the afternoon... by the end of nine days you won't be needin' that cooler anymore.
You good with that?? :warning: :thumbsup:

[CrossRamRich]

:lol: :lol: :lol: :lol: :lol:



Okay -- You do know that I've been a member of AA for like 28 years now.... Just sayin' -- we could have a meeting each morning... and again in the afternoon... by the end of nine days you won't be needin' that cooler anymore.
You good with that?? :warning: :thumbsup:

:brix: :tiptoe: :whistling: :confused59: :eek: :goofy: :thmbsdwn:

[clill]

You guys suck

[GregWeld]

Greg, I have a Class A DL, I'm a grillin' Guru, and I never hog the remote for the big screen. Just need room for my cooler!:idea: I think Melissa can do without me for nine days. :idea:




So I'm rethinking your offer.... even hammered you'd be more fun than a couple other guys I know. How are ya on makin breakfast?

[GregWeld]

You guys suck





It'll suck to be YOU.... when Jack and I are sitting under the awning watchin' the big screen wolfin' down a couple of Rich's awesome bbq'd prime New York steaks and bakers with beer cheese sauce... and our cars are parked safely inside out of the rain and hail storm.

[Jack Maurer]

You guys suck

Are you having a good time in Honduras?

[clill]

Ahhhh

[clill]

.......

[Jack Maurer]

.......

Wow, that looks like so much fun.....Charlie, you live a great life......wish Beth and I could join you.

[WSSix]

I'm CDL A as well and I hold the lovely X endorsement which means I am legally allowed to be the most dangerous vehicle on the road. :hello: I can do it all and I need a good reason to quit. Driving a rig for PT sounds like a good reason to me!


Congrats on having the car filmed for a show, Jack. Let us know when and where it might air so we can check it out.

[GregWeld]

Wow, that looks like so much fun.....Charlie, you live a great life......wish Beth and I could join you.



When you become famous, like Stielow -- THEN he might invite you.....

[clill]

Wow, that looks like so much fun.....Charlie, you live a great life......wish Beth and I could join you.

NO. :bitchslap:

[GregWeld]

Greg, I have a Class A DL, I'm a grillin' Guru, and I never hog the remote for the big screen. Just need room for my cooler!:idea: I think Melissa can do without me for nine days. :idea:




Hey Rich!! You better raise your offer dude! You got competition for that driv'n' spot!!


http://www.lateral-g.net/forums/showthread.php4?p=465653#post465653

[Sieg]

I am legally allowed to be the most dangerous vehicle on the road. You drive an Oldsmobile Eighty Eight? :sieg:

[Sieg]

Hey Rich!! You better raise your offer dude! You got competition for that driv'n' spot!!

http://www.lateral-g.net/forums/showthread.php4?p=465653#post465653
https://sphotos-a.xx.fbcdn.net/hphotos-snc6/168612_1435862111374_7632840_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash4/184609_3855114431170_868731369_n.jpg

https://sphotos-a.xx.fbcdn.net/hphotos-ash3/560255_4002927046393_1681057711_n.jpg

:rules: :D

(Sorry Jack, welcome to the Lat-g thread jack) :thumbsup:

[CrossRamRich]

No wonder Charley goes to Honduras, he's the only skinny guy in the pool!! Makes him look like Lance Armstrong next to those dudes!:lmao:

[Vince@Meanstreets]

Hey Rich!! You better raise your offer dude! You got competition for that driv'n' spot!!


http://www.lateral-g.net/forums/showthread.php4?p=465653#post465653

dance off!! dance off!!! dance off!!! :hapdance:

[GregWeld]

No wonder Charley goes to Honduras, he's the only skinny guy in the pool!! Makes him look like Lance Armstrong next to those dudes!:lmao:



OUCH....




Okay - now back to Jack's killer Camaro... :lol:

[CrossRamRich]

OUCH....




Okay - now back to Jack's killer Camaro... :lol:

MORE COURTNEY !!!!!!!!!!:drool:

[RussMurco]

I was drawn to this car at the GNRS too!
http://i1339.photobucket.com/albums/o713/Ravenworks-PorterMuffler/Darkside_zps0d895eca.jpg
It is, indeed, a stunner!!!

[GregWeld]

MORE COURTNEY !!!!!!!!!!:drool:






Oh grow up!!! :bitchslap: :D








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-46.jpg

[GregWeld]

Jack was obviously trying for a home run..... :lol: :lol:







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-47.jpg

[Royalworks]

--> that guy probably thought he was gonna be in the picture holding his shot...

[GregWeld]

Okay -- this is now known as the official Bassackwards build thread.... since we're posting up pics of the finished product first --- and now we're going to post up some pics of it being built. Actually... I kind of like this way. I get to see what the car looks like and then I'm going to look at the pics to see how it got there!!:thumbsup: :D



I'm doing a lot of work for a guy with no title.... :rolleyes:




http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-63.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-62.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-61.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-64.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-65.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-66.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-67.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-60.jpg

[clill]

Show a pic of the cream puff he first bought.

[Jack Maurer]

Show a pic of the cream puff he first bought.

Pics of this cream puff before taking is apart are on the way....classic example of beauty is only skin deep.

[GregWeld]

Show a pic of the cream puff he first bought.




Oh..... we've all owned "those". :lol:

[GregWeld]

Okay ----- RE: Charlie's smart azz quip about Jacks "cream puff".... here's the beauty that Jack had... which turned into Darkside...





http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-71.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-68.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-70.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-69.jpg

[GregWeld]

She drops her robe.... and it's Oh My!!









http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-72.jpg

[96z28ss]

She drops her robe.... and it's Oh My!!


http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-72.jpg

OMG :brix: :faint:

Isn't it amazing what bondo and paint can hide.

[GregWeld]

Oh yeah..... kinda like a silicone implant??:lol: :lol: :lol:

[tones2SS]

She drops her robe.... and it's Oh My!!


http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-72.jpg

WOW! That is scary. You can never tell what is underneath a paint job till you stripped her down.

[Jack Maurer]

WOW! That is scary. You can never tell what is underneath a paint job till you stripped her down.

Actually came close to throwing the whole thing away; definitely made an impact on the budget in getting the body right.

[XLexusTech]

Who makes that steering column mount and bearing firewall plate?

[tmadden]

I'm amazed what was underneath. I had no idea anyone could work bondo magic like that!!

[Jack Maurer]

Who makes that steering column mount and bearing firewall plate?

Flaming River

[waynieZ]

That must have been some whack. I never would have guessed that was there.

[glassman]

Oh yeah..... kinda like a silicone implant??:lol: :lol: :lol:

And during the "morning after" with teeth missing and banana cigarette breath saying "come here and gimme a kiss". .....ewe

[sds machining]

WOW! That is scary. You can never tell what is underneath a paint job till you stripped her down.

Sounds like a scene from "The Crying Game"...

[GregWeld]

Sadly that scar is right where you wouldn't see it from the inside of the trunk...


The good news... Jack had the ole girl all fixededed up nice!

[GregWeld]

Jack is saying......Okay, Courtney you can drive Darkside, but what is in it for me?







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-73.jpg

[aany001]

Were the seats and dash restitched in leather or are they stock procar seats and a stock repop dash? Love the way they look!!!

[Jack Maurer]

Were the seats and dash restitched in leather or are they stock procar seats and a stock repop dash? Love the way they look!!!

The dash and seats have both been redone in leather with a French stitch. The dash is the better of the two repop dashs available. The seats have also been reshaped a bit.

[aany001]

Who's dash did you go with?

[Jack Maurer]

Who's dash did you go with?

I think I got the dash from Rick's Camaro, but not sure. I do remember, the better of the availabl repop dashs was difficult to find. I had to settle for a non air dash and modified it to fit the center air outlet. The modification was pretty simple. Let me know if I can be of further help.

[Jack Maurer]

Jack is saying......Okay, Courtney you can drive Darkside, but what is in it for me?







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-73.jpg

There is supposed to be more going on with the new TV show this Friday morning in Huntington Beach. Don't know if it includes Courtney or exacting where in Huntington Beach. I was just told to have Darkside available at an address to follow at 8 am. Anyone in the area is welcome; good chance to meet everyone and perhaps get your car in the show for one of the episodes. I will post the address as soon as I get it; would very much like to meet any of you that have been following this thread.

[Sieg]

Jack is saying......Okay, Courtney you can drive Darkside, but what is in it for me?

It's looking like Courtney kinda likes Jack and his Darkside. :_paranoid

[Frankenstine]

Dang already back to the 2nd page??? NO way, To the top .. more picks???? please:popcorn2:
:D :thumbsup:

[GregWeld]

Jack asked me to post this video for him....






8YP5lzZPqos&feature

[camcojb]

I really should do a feature on that car. I know some people are tired of Camaros, but that is an incredible car.

[Jack Maurer]

Jack asked me to post this video for him....






8YP5lzZPqos&feature

Thank you Greg for all your help. This was a short video from today on the filming of the first episode of a new TV car show titled Private Concourse Challenge. This very short segment was shot at Rich Evans shop in Huntington Beach, CA. Rich is the judge for the first show and has a long history of building some pretty radical custom cars. All and all a pretty fun day.

[GregWeld]

Okay -- just because nobody is reading this thread for info on another '69 Camaro.... we'll post up some more of something that readers ARE interested in!! :lol:









http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-74.jpg











Sorry Jack -- but that's about as close as she's going to get to you....












http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-75.jpg













Well okay.... this is a car site.... so here's the obligatory car shot. We don't want to get into trouble with Jody.












http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-76.jpg

[Formula43 Wheel]

Killer 69'...well done! Call me old school, but I love the look of a nicely built carb. motor and the Nascar style air cleaner, Thomson builds awesome motors!

:thumbsup:

[Jack Maurer]

Killer 69'...well done! Call me old school, but I love the look of a nicely built carb. motor and the Nascar style air cleaner, Thomson builds awesome motors!

:thumbsup:

Thanks Travis. I am looking for your recommendation for an alternative set of wheels for Darkside.

[Sieg]

Jack - Hope it's OK to give an opinion........?

Maybe this wheel:
http://www.formula43.com/Album%20Domestic/album/medium/0007.jpg

In this finish:
http://www.formula43.com/Album%20Domestic/album/medium/0020.jpg


:tiptoe:

[Jack Maurer]

Jack - Hope it's OK to give an opinion........?

Maybe this wheel:
http://www.formula43.com/Album%20Domestic/album/medium/0007.jpg

In this finish:
http://www.formula43.com/Album%20Domestic/album/medium/0020.jpg


:tiptoe:

Sure, opinions are what I am looking for.

[Roberts68]

Jack, forgive me if I missed it but could you or have you described anything about the firewall treatment where the master cylinder and clutch master are mounted? Is that a product available in the aftermarket or a one-off fabrication piece?


http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-62.jpg

[Jack Maurer]

Jack, forgive me if I missed it but could you or have you described anything about the firewall treatment where the master cylinder and clutch master are mounted? Is that a product available in the aftermarket or a one-off fabrication piece?


http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-62.jpg

The bracket is available from DSE and thru Rick's Camaro for $29.95. The bracket can be either welded or bolted to the firewall.

[Formula43 Wheel]

Thanks Travis. I am looking for your recommendation for an alternative set of wheels for Darkside.

Jack,

Currently our most popular wheel is the RAD 10. Our most popular finishes are our Autobahn Satin black and Laguna Gray. However our new RAD S6 in a full polished is stunning as well. This would be by vote! :thumbsup:

RAD 10 19" Autobahn Black Whole Wheel:
http://i1216.photobucket.com/albums/dd375/tjohnson151/RAD1019SatinBlack_03_zps6bca7780.jpg
http://i1216.photobucket.com/albums/dd375/tjohnson151/RAD1019SatinBlack_04_zpsc4da063d.jpg
RAD S6 Full Polished with Clear coat over the center section:
http://i1216.photobucket.com/albums/dd375/tjohnson151/RADS618FullPolished_zpsf3ee0ef8.jpg
http://i1216.photobucket.com/albums/dd375/tjohnson151/RADS618FullPolished_02_zpsf4b6c523.jpg
RAD 14 Laguna Gray
http://i1216.photobucket.com/albums/dd375/tjohnson151/RAD14LagunaGray_zps8b98164a.jpg

Of course we have lots of options for spoke design and color.

[fleetus macmullitz]

Jack,

I'm considering a solid color wheel in this shade...

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/5921538243_2258c0e93d_b-1.jpg

on these Formula43 RAD10's
http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/RAD1019SatinBlack_zps3c861e3f.jpg

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/RAD1019SatinBlack_04_zps24fd4e02.jpg

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/RAD1019SatinBlack_05_zps0ee11a08.jpg

[Jack Maurer]

Jack,

I'm considering a solid color wheel in this shade...

[IMG]http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/5921538243_2258c0e93d_b-1.jpg

perfect...I really like the color and wheel style

[WSSix]

My only suggestion would be to stay with a mix of painted and metal for the wheel. I think this would help the rims stand out from the already darker colored paint. I think a machined finish would look better than polished. Then again, I like the wheels that are already on the car and wouldn't change them if it was me. Good luck on choosing.

[Jack Maurer]

My only suggestion would be to stay with a mix of painted and metal for the wheel. I think this would help the rims stand out from the already darker colored paint. I think a machined finish would look better than polished. Then again, I like the wheels that are already on the car and wouldn't change them if it was me. Good luck on choosing.

I still like the wheels I have on the car now, but always second guessing myself. I recently changed the centers to a titanium color, which really changed the look...Always amazed as to what a difference wheels make on a car. I appreciate very much your suggestions along with constructive comments from all.

[Roberts68]

I still like the wheels I have on the car now, but always second guessing myself. I recently changed the centers to a titanium color, which really changed the look...Always amazed as to what a difference wheels make on a car. I appreciate very much your suggestions along with constructive comments from all.

What?! Where's our revised wheel center pictures?? :popcorn2:

Is GW out :relax: in the sun again instead of posting pic updates?

:lmao:

[KPC67]

if I may as well....
FULL POLISHED:thankyou:

You have to do what you want but I am a little more traditional when it comes to wheel finishes.

[Jack Maurer]

if I may as well....
FULL POLISHED:thankyou:

You have to do what you want but I am a little more traditional when it comes to wheel finishes.

Fully polished would certainly look great, but is just little too much bling for my taste. Also like all semi black, but seems like everyone is opting for the badass look. My goal was a little bit old school and touch of badass.....if that makes any sense.

[KPC67]

If you ask me you have accomplished that with your current Fikse's

[fleetus macmullitz]

Jack,

Not too light, not too dark a finish IMO.

http://i87.photobucket.com/albums/k156/wnyjazz/FIAT2050020Custom20Wheels20OZ20Ultr_zpsb7248b66.jp g

[fleetus macmullitz]

And these were on Dale, Jr.'s 2nd gen by DSE.

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/dalejrwheelandtire.jpg

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/dalejrcloseupwheelsfrdrside.jpg

[Jack Maurer]

And these were on Dale, Jr.'s 2nd gen by DSE.

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/dalejrwheelandtire.jpg

http://i87.photobucket.com/albums/k156/wnyjazz/Wheels/dalejrcloseupwheelsfrdrside.jpg

I like it...thanks

[Jack Maurer]

I like it...thanks

http://i1283.photobucket.com/albums/a542/Jrmaurer69/6EAF5E17-00B5-4B41-B248-DE4A35DF2445-5528-0000054DEC72CC9E_zps38de4b12.jpg

Wheel Center redone with titanium mat powder coat finish

[GregWeld]

Well look at you! Posting pictures all by yourself!!


EEEEEEHHHHHAAAAAA

[Jack Maurer]

Well look at you! Posting pictures all by yourself!!


EEEEEEHHHHHAAAAAA

Old guys can still learn new tricks.......thanks again Greg for all your help posting pics for me....I owe you big time.

[GregWeld]

Old guys can still learn new tricks.......thanks again Greg for all your help posting pics for me....I owe you big time.




I'd just take a title.... a simple request.... :bitchslap: :lol: :lol:

[tmadden]

I like it...thanks

Still my favorite 2nd gen. May have to copy it. Attention Musclerodz!!!

[camcojb]

Here's a short video of Jack at Infineon in his Mustang track car.

http://www.lateral-g.net/members/darkside/video.jpg (http://contour.com/stories/1003271115-jack-mtmr-infineon)

[DOOM]

Jack leave those wheels alone they look awesome !!!!

[Flash68]

Great vid... thumbs up to the Porsche spinning out. Heh. :D

[Flash68]

Fully polished would certainly look great, but is just little too much bling for my taste. Also like all semi black, but seems like everyone is opting for the badass look. My goal was a little bit old school and touch of badass.....if that makes any sense.

Jack, you got style. :cheers:

[waynieZ]

Jack Awesome ride, and those are my favorite wheels. They look awesome.

[tones2SS]

Awesome video. Love the track car.
The wheels on the '69 look killer.

[GregWeld]

More "DETAIL PICS" posting for Jack....




http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-34.jpg






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-79.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-78.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-77.jpg







http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-80.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-83.jpg

[Al Moreno]

Thanks for posting Greg! Love those details pictures, keep them coming.

[Lenie]

Those are purdy pics:cheers: Again, great looking car.

[sds machining]

Those are purdy pics:cheers: Again, great looking car.

Leni, (nice to meet you at PDX)
This is one of those cars that pictures don't do it justice. Its very straight and well put together, interior is flawless and the car looks tough as nails.

[GregWeld]

Jack says I skipped this one so here it is!











http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-81.jpg

[tones2SS]

Wow, what a great car Jack. Keep the pics coming Greg.

[GregWeld]

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-86.jpg









http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-89.jpg









http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-85.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-87.jpg








http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-88.jpg

[coolwelder62]

Outstanding Detail.Color is perfect.So IMHO :trophy-1302: :G-Dub:

[Jack Maurer]

More filming today for the PCC car TV show at Rich Evans shop in Huntington Beach, CA. Apparently there are a few more shots they need for the first episode. I will take some pics for you Courtney fans along a couple of Darkside.

[Roberts68]

Please be sure to keep us in the loop as details evolve with when the show will air so we can set the dvr for the new program... and of course to record Courtney and Darkside. ;)

[Sieg]

What about little Miss Blue-Hair? :D

[WSSix]

What about little Miss Blue-Hair? :D

I like your thinking :thumbsup:

[Jack Maurer]

More filming today for the PCC car TV show at Rich Evans shop in Huntington Beach, CA. Apparently there are a few more shots they need for the first episode. I will take some pics for you Courtney fans along a couple of Darkside.Y


Filming today was cancelled; one of the crew was in the ER with some kind of shoulder injury; sorry no Courtney/Darkside pics

[glassman]

I must say, that detail is impeccable. Love it.

[syborg tt]

Love the Camaro.

But seriously I want a ride in the Mustang !!!!!

[Jack Maurer]

Love the Camaro.

But seriously I want a ride in the Mustang !!!!!

Anytime....I will be at Sonoma on May 14th and SAAC 38 at Auto Club Speedway the 4 th of July weekend.

[NvrDun71]

Jack sent you a few PM's, No Reply??

[syborg tt]

Anytime....I will be at Sonoma on May 14th and SAAC 38 at Auto Club Speedway the 4 th of July weekend.

That would be awesome and thank you for the offer. I am going to see about flying out 4th of July weekend.

This would be something fun to add to my Bucket List

[GregWeld]

Which one of these is thinking "hurry up and take the picture" and which one is thinking "Can you slow down a bit, and take a few more..."






http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-90.jpg[/URL]

[GregWeld]

kBBFRt0IHlY&feature

[Sieg]

Mmmmmm Muh!

[Roberts68]

Very nice Jack, please be sure to let us know when to set the dvr for Courtney's new show with all the details so we don't miss more of her and... um, what? Oh, there was a car on the show too? Cool, and the car.

:mock:

:lol:

Be sure we get a link to Blackjack in this thread too. Some of us don't pour over every new thread that pops up... Well, I'm sure there is someone who doesn't.:rolleyes:

[Lenie]

Jack, that sure is one pretty car!

http://i919.photobucket.com/albums/ad33/gregweld/Jack%20Maurers%20Camaro/file-90.jpg[/URL][/QUOTE]

[GregWeld]

And heeeeeeeerrrrrreeeeeee'ssssssss (like the old TV show introductions!) Jack!






r6R5i9_wkTA&feature

[Greg from Aus]

And the winner is ?

Greg

[Jack Maurer]

And the winner is ?

Greg

Darksie on. The whole experience was a blast....there is a ton of footage that I have not seen yet; stay tuned for moe short clips.....I can't wait to see the filming of driving around the streets of Huntington Beach.

[Sieg]

stay tuned for moe short clips.....

Cmb35FGuqFU

:welcome3:

[waynieZ]

Sieg thanks I needed a good laugh been a tough day. I laughed like a fool.
I love those guys! When I was a kid I actually got to see Moe and Larry at an amusement park Rocky Point RI.

[Jack Maurer]

Looks like the Velocity-Discovery channel will be showing the new series Private Concourse Challenge (PCC). Don't know yet when the first show will air. I would think they would have to start shooting more episodes pretty quickly. Stay tuned for further updates.