BANKO
01-02-2013, 02:56 PM
Hey Guys, I recently picked up a Viper T56 with an LT1 input shaft swapped into it. I was hoping to install without a rebuild, but upon closer inspection the input shaft (https://www.dropbox.com/s/48b9rn7so02nwnb/damaged-input-shaft.jpg) is damaged. I suspect there are other warn parts that should be replaced.
Do you have suggestions for a reputable re-builder in the Bay Area on the Pennisula?
Do you have suggestions for a reputable re-builder in the Bay Area on the Pennisula?