tazzz2_ca
11-30-2012, 08:48 AM
I have a few motors, some blocks and heads to sell off or trade for LS parts/ motor/s etc... I will get the specifics post in the next day or two and with all parts & they are in Vaughan, Ontario,Canada with the area/Canadian zip code of L4L 9C8.. So if anyone is interested in the parts please use this area code to calculate shipping or better yet pick them up in person as I always enjoy meeting fellow enthusiast...
Again I will post detailed info in the next 24-48 hours
a sample of the complete engines are:
-1970 400 with #13 heads (take out from a 70 Firebird Formula 330hp) 1,200USD
-1973 455 from one of my TA's (take out from WarPath light org motor 50K) 1,300USD
-475ci pump gas stroked 455 with CV-1 heads and Holley injection and custom headers for early and gen (Still in car and can be heard running want to swap for built LS3 NA stroker (418ci range)... current motor has over 6K in heads alone that include Jesel roller shaft system and custom built stepped 1,500USD headers for early second gen)
Sets of Heads
-# 6X12 DN B287 -make an offer
-#12 F249 -Note one of these sets of 12's is for a disassemble RAIII Motor
-#12 D290 - I will provide more detail later on which ones.. good set by Paul Spot paid 1k make an offer,,,,, other set goes with # match bock
-#13 E210 - $450USD
-#15 J317 -make an offer
-#16 D229 -make an offer
I'll check but I believe there is still the following blocks available
- 1974 455
- 1973 400 machined and ready to go
and some cranks as well..... details to follow
- have a 70 RAIII block that needs selves for sure (also the matching heads as above)
Carbs
-7040570 -California RA auto (Show Restored 2,000USD)
-7041263 -71 400 4 speed single ventury (Show Restored $1,000USD)
-7040564 -Ca 400 auto ($500USD)
-1704320- (Still getting details on carb)
-One thin wall TA shaker (white) $1,000USD
-One thin wall shaker in primer rebuild by (Norwood = Craig on PY forums) $800USD
-One thin wall shaker and pan rough shape
In a nut shell I'm really hate to see all this Pontiac stuff sitting and I'm fixing up a 80's C-10 for my Son and want these Pontiac parts to go so I can help my son build his dream too....
I can be reached at 416-566-9660
Thanks,
Albert
Again I will post detailed info in the next 24-48 hours
a sample of the complete engines are:
-1970 400 with #13 heads (take out from a 70 Firebird Formula 330hp) 1,200USD
-1973 455 from one of my TA's (take out from WarPath light org motor 50K) 1,300USD
-475ci pump gas stroked 455 with CV-1 heads and Holley injection and custom headers for early and gen (Still in car and can be heard running want to swap for built LS3 NA stroker (418ci range)... current motor has over 6K in heads alone that include Jesel roller shaft system and custom built stepped 1,500USD headers for early second gen)
Sets of Heads
-# 6X12 DN B287 -make an offer
-#12 F249 -Note one of these sets of 12's is for a disassemble RAIII Motor
-#12 D290 - I will provide more detail later on which ones.. good set by Paul Spot paid 1k make an offer,,,,, other set goes with # match bock
-#13 E210 - $450USD
-#15 J317 -make an offer
-#16 D229 -make an offer
I'll check but I believe there is still the following blocks available
- 1974 455
- 1973 400 machined and ready to go
and some cranks as well..... details to follow
- have a 70 RAIII block that needs selves for sure (also the matching heads as above)
Carbs
-7040570 -California RA auto (Show Restored 2,000USD)
-7041263 -71 400 4 speed single ventury (Show Restored $1,000USD)
-7040564 -Ca 400 auto ($500USD)
-1704320- (Still getting details on carb)
-One thin wall TA shaker (white) $1,000USD
-One thin wall shaker in primer rebuild by (Norwood = Craig on PY forums) $800USD
-One thin wall shaker and pan rough shape
In a nut shell I'm really hate to see all this Pontiac stuff sitting and I'm fixing up a 80's C-10 for my Son and want these Pontiac parts to go so I can help my son build his dream too....
I can be reached at 416-566-9660
Thanks,
Albert