akrapovic
11-14-2012, 03:04 PM
I no longer have a need for this motor. The motor was built by Billy Briggs. This engine was originally purchased from a salvaged vehicle with the intent on just getting an early model hot rod on the road. After inspection and leak down numbers it was decided to do entire rebuild and recondition of the engine to avoid any issues down the road. It was made 0.030” to clean up the bores with the following parts installed to optimize power within a light budget: Based off the GM LS327 crate motor but with a torque and horsepower increase of almost 60HP and fuel injection ready.
• LS6 intake manifold
• LS1 78mm throttle body
• LS6 coil packs
• 862 heads with C5 Z06 valve train / springs- complete valve job
• C5 Z06 camshaft
• LS1 24lb/hr injectors
• Fresh rebuild with engine dyno break in per GM power audit cycling
• Gen 3 Camaro pan and balancer
This engine does not include the water pump or front drive system since there are various choices that may depend on the individual project it is being used for.
Asking price is $4,500 with all dyno sheets and data included. The motor is currently sitting on a stand at Motor City Speed.
Contact Rich at MotorCity Speed for more info. They will be handling the sale.
248-669-5810
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0047.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0048.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0046.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0045.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0044.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0043.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0042.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0038.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0037.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0036.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0035.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0034.jpg
• LS6 intake manifold
• LS1 78mm throttle body
• LS6 coil packs
• 862 heads with C5 Z06 valve train / springs- complete valve job
• C5 Z06 camshaft
• LS1 24lb/hr injectors
• Fresh rebuild with engine dyno break in per GM power audit cycling
• Gen 3 Camaro pan and balancer
This engine does not include the water pump or front drive system since there are various choices that may depend on the individual project it is being used for.
Asking price is $4,500 with all dyno sheets and data included. The motor is currently sitting on a stand at Motor City Speed.
Contact Rich at MotorCity Speed for more info. They will be handling the sale.
248-669-5810
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0047.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0048.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0046.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0045.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0044.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0043.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0042.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0038.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0037.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0036.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0035.jpg
http://i721.photobucket.com/albums/ww212/MotorcitySpeed/IMG_0034.jpg