T56 Swap for Gen I & II SBC [Archive]

View Full Version : T56 Swap for Gen I & II SBC

rusty63ss

11-13-2012, 09:59 PM

SOLD!

Okay guys. I am selling my T56 swap setup. This came from a '97 Camaro and has approx 91k. This tranny will work with both GenI and GenII SBC motors. If you have a two piece rear main you will need a conversion flywheel.

This is NOT compatible with GenIII or newer motors.
This is complete from the flywheel bolts to the rear u-joint. You will receive the following.

T56 tranny w/bell housing
Master and slave cylinders
Clutch and Pressure Plate consider them cores
Flywheel Should be resurfaced
Pedal Assembly
Driveline
Torque Arm
Crossmember

Paypal accepted. Local pickup preferred but I can ship it at your expense. Ships to lower 48 only.
I would like $1500. Central Point, OR

http://i1217.photobucket.com/albums/dd396/My63Nova/photo1_zpsbc56d996.jpg
http://i1217.photobucket.com/albums/dd396/My63Nova/photo2_zps5aa6e640.jpg

ryeguy2006a

11-14-2012, 05:49 AM

Would you sell the drive shaft separate? If so, what is the length?

rusty63ss

11-14-2012, 06:11 AM

Would you sell the drive shaft separate? If so, what is the length?

At this point I am not considering breaking up the swap.
Thank you for your interest.

MaxHarvard

11-14-2012, 09:29 AM

Would you sell the drive shaft separate? If so, what is the length?

I have my old driveshaft that I would be willing to sell you. New U joints and about 2,000 miles on it.

rusty63ss

11-20-2012, 08:43 PM

Somebody has to want a 6 speed for their 1st or 2nd Gen SBC. Open to offers.

rusty63ss

11-28-2012, 07:59 PM

bump!!

rusty63ss

12-09-2012, 08:14 AM

Sunday bump!

rusty63ss

12-26-2012, 08:25 AM

Hope everybody had a Merry Christmas!

Still up for grabs!!

rusty63ss

01-21-2013, 05:29 PM

Bump!

rusty63ss

04-04-2013, 07:28 PM

New lower price!

$1600 plus shipping.

Mofoe73

04-05-2013, 11:28 AM

is that a Mcleod conversation flywheel for the one piece rear main smc?

New lower price!

$1600 plus shipping.

rusty63ss

04-05-2013, 11:59 AM

is that a Mcleod conversation flywheel for the one piece rear main smc?

The included flywheel is for a one piece RMS.

For the two piece you will need Centerforce PT#700107. I don't know what Mcleod's PT# is.

rusty63ss

04-08-2013, 06:06 AM

I will be traveling to Vancouver, WA on Saturday 4/13/13 from Medford, OR. I could meet a buyer on the I-5 corridor.:thankyou:

rusty63ss

04-10-2013, 05:31 PM

New lower price! $1500 plus shipping.