Quick question on this third member!

[b757jetdr]

Has anyone heard of this brand of third members? Yukon brand?

http://www.ebay.com/itm/9-Inch-Ford-Yukon-Aluminum-Thru-Bolt-Third-Member-Case-/390488011878?hash=item5aeae63466&item=390488011878&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

This is a link to a eBay auction I found it on.

Thanks

[Bryce]

I see them at SEMA every year. I dont know anyhting about them. Not sure where they are made.

[214Chevy]

I have heard of them. Lots of shops use Yukon gears to keep cost down on rear ends. Not a bad gear for a driver. Unless, you are going to be putting down some power, they're not a bad brand gears.

[kp.touring]

It's Randy Ring and Pinion's brand.

[Ruslow]

A pretty good case, the retaining lugs[for the side bearings] are better located to help in preventing cracking of the cap but then they made the cap with a step.Why? You will need to run that style of front pinion support,I don't think the standard pinion support will work.and think about what gear ratio you will running being aluim they had to add material and you may get interference with some of the bigger ratios.Stan

[LS1-IROC]

Yukon makes good stuff.

[intocarss]

I've heard good stuff about them

http://www.yukongear.com/

[b757jetdr]

Thanks for the input guys, I am thinking about trying out this unit. I am going to try and do some more research on this though.

Thanks

[Ringbrothers]

I've used those guys and there really good to work with. Telly