WTB 67 Anvil Front Inner Fenders

[mdprovee]

I am looking for 67 Camaro inner front fenders from Anvil. If you would like to sell them let me know. Prefer carbon and fiberglass set.

[John510]

Anvil doesn't have them anymore?

[mdprovee]

Just looking to see if someone wasn't going to use ones they purchased. I am not 100% sure they will fit with my Procharger.

[John510]

I can send you a pic of one installed. I think it should fit.

[mdprovee]

Thanks John, yeah if you have pictures, I would appreciate them.

[geberhard]

Good deal on a pair here

http://www.lateral-g.net/forums/showthread.php4?t=39201

[mdprovee]

Thanks for the info. Unfortunately, they are for a 69 Camaro, where mine is a 67, and Anvil list as different part numbers.

Again thanks.

[geberhard]

AFAIK they are pretty much the same part. Tried calling them and ask?

I.e. normally when buying inner fenders in steel they are teh same part numbers 67-69..


http://www.jegs.com/i/Sherman%20Parts/455/696-24R/10002/-1?sendroicid=bbef8492-2d00-41d6-b158-38db0de2603c&sendroikwd={keyword}&gclid=CJfthYTG3rMCFYF7Qgod_RIAQg

[mdprovee]

Talked with Anvil, they are different, 67 & 68 to 69.

[John510]

They look just like the OEM metal ones. Heres mine.

http://i527.photobucket.com/albums/cc352/JohnS510/8F23DB37-0FB9-4DC3-BEF3-681DD6BE21B2-3556-000001E446F2EC07.jpg

[geberhard]

JOhn, are they wider to allow more tire room or stock size?

[mdprovee]

Thanks for the picture John. My Procharger hangs off the motor as typical, and along the bottom of it, it is very close to the inner fender now. I may have to buy them see if they work and sell if they dont.

Decisions, decisions.

[geberhard]

Again, are they teh same dimensions as your stock ones? May save you time and effort on buying them ;)

Called Anvil?

[John510]

They may be a tad wider but Im not 100% sure on that one.