New Guy!!

[dontlifttoshift]

New here anyways. Been lurking here quite a while and got tired of not being able to see the pictures. I hang out at pro-touring and the hamb, and lurk at corner-carvers as well.

You may have seen my 32 around and we (my wife, Angela, aka the shoe) are bulding a 66 Mustang full of DSE and GMR stuff.

We'll see you at the LatG party at SEMA!

Thanks!

[Ron in SoCal]

Welcome to the best car site on the net Donny! About time you showed up here...:D :cheers:

[GregWeld]

Awesome!

I think I just saw pics of the '32 at a GG show autocross event in the GG Gazette?

Welcome! See you in November!

[dontlifttoshift]

Thanks Ron and Greg.

I just realized I screwed up already. My fat fingers forgot to push "o" when I entered my username......should be dontlifttoshift could a mod help me out with that please.

FNGs.....at this rate I won't even qualify to be a grenade inspector.

[camcojb]

Thanks Ron and Greg.

I just realized I screwed up already. My fat fingers forgot to push "o" when I entered my username......should be dontlifttoshift could a mod help me out with that please.

FNGs.....at this rate I won't even qualify to be a grenade inspector.

fixed it for 'ya. :thumbsup:

[Flash68]

Donny - welcome to the greatest site on the internets. :D

Love the hot rod and know you get out there and abuse it! :thumbsup:

[dontlifttoshift]

Jody, thanks for that. You and I have a mutual friend in Kwhizz.

Flash, yeah, I beat the snot out of that thing....it sure is fun.

[camcojb]

Jody, thanks for that. You and I have a mutual friend in Kwhizz.

Flash, yeah, I beat the snot out of that thing....it sure is fun.

Ken's a great guy! :thumbsup:

[youthpastor]

see you at the party. Gotta love a guy that hangs out at the HAMB and Lat-G. do the HAMB boys know you are playin with kids that like 18" wheels and skinny tires?

[WSSix]

Welcome!

[Ron in SoCal]

Thanks Ron and Greg.

I just realized I screwed up already. My fat fingers forgot to push "o" when I entered my username......should be dontlifttoshift could a mod help me out with that please.

FNGs.....at this rate I won't even qualify to be a grenade inspector.

FNG! Get it straight, willya :lol: Thanks for the good deal on that accessory drive :thumbsup:

Now get in here and contribute...post up some pics of the shop, running that hot rod on the AutoX and a pic of that rear housing on the lathe (my personal favorite).

[RECOVERY ROOM]

Nice to see another Street Rod guy on here, The people on this site like looking at them also. Welcome :thumbsup:

[Ricochet]

Welcome aboard!! :thumbsup:

[intocarss]

Welcome :thumbsup:

[65 347]

Welcome to the board. Did not know your a local guy. Saw you tearing up the autocross at Ind, you did pretty good for just having a drop axle.

Mike

[Streetking]

Welcome!

[dontlifttoshift]

Thanks guys!! Here are some pics from the last 32 redeux.....

built my own accessory drive from half a VintageAir Frontrunner

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-tXJjvCD/0/S/136-2-S.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672638133&k=tXJjvCD&lb=1&s=A)

Rear coilover mounts came out cool. Single shear, I know, but almost all hot rods are set up this way. I can rotate the billet piece to adjust ride hieght up and down and change the angle on the coilovers.

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-d6kfdRV/0/M/269-2-M.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672648573&k=d6kfdRV&lb=1&s=A)

3 link in this hoopty. That giant crossmember is right behind the seat.....

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-CjVF8fz/0/M/299-2-M.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672655615&k=CjVF8fz&lb=1&s=A)

The floors were styled after a 34 Ford.....sort of. Yep steel floors, plastic car:rolleyes:

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-FsVvSg4/0/M/491-M.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672716890&k=FsVvSg4&lb=1&s=A)

Wiring panel getting started. All tied with wax string, I learned from a guy that worked at the power company. If I get on a roll it is actually faster than zip ties.

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-NS8vkcf/0/M/602-M.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672737292&k=NS8vkcf&lb=1&s=A)

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-SQ8zcCJ/0/M/640-M.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672756110&k=SQ8zcCJ&lb=1&s=A)

Here is a shot with the other wheels and tires. For this car I really prefer this look......sadly this was the last time these wheels were on. The car is running big brakes now with a GMR floater in the back. Front wheels no longer fit:(

http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/i-g7DL3sD/0/M/730-M.jpg (http://frameupwheelworks.smugmug.com/Projects/Donny-and-Angelas-32-Ford/21037222_37cTSQ#!i=1672765643&k=g7DL3sD&lb=1&s=A)

That's the short version anyways.....still not finished with it. Got a few things to wrap up this winter and then it's on to the "late model" 66 Mustang.

[Flash68]

Bad ass stuff. What's the powerplant consist of? :unibrow:

[dontlifttoshift]

Simplicity....2011 5.3 takeout that I bought from SLP on ebay as a long block. Eliminate the afm, Mast cam (along with their harness and ecm), LS2 intake and LS3 throttle body and a stock LS3 oil pan.