Forgeline wheels for sale .. again

[Steve1968LS2]

New Forgelines are on the way, so it's time to move along the current ones.

There are six wheels for sale.. go figure.

2 - 18x12 with a 5.75" backspace

2 - 18x9.5 .. can't remember the backspace, but it's the typical one for C5/6 Vette offsets (subs that use a C5/6 Vette upright) I will find out tomorrow what it is.

2 - 19x12 with a 5.75" backspace

All the wheels are Forgeline DS3 split 5 spoke wheels. These are stepped wheels with gunmetal coated centers (and inner hoops to hide brake dust).. All six wheels also have titanium fasteners.

http://www.forgeline.com/products/performance-series-step-lip/ds3-17-18-19-20.html

Local buyers who want the 18x9.5 and/or 19x12 wheels get them with decent Nitto NT05 tires

The 18x12 wheels don't have tires

Wheels are used, but in great shape.. New they are over $1000 a wheel, the Ti fasteners add $100 per a wheel.

$2200 for four or $1100 for two so you can get all four of the 18s or 18 front and 19 rear. Where else are you going to get Forgelines for $550 a wheel? :)


They look like this:

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/473514_364946493535780_1543421122_o.jpg

[Steve1968LS2]

Oh, I can ship wheels.. but not with the tires. Shipping costs will be whatever UPS charges me. Typically about $100 to $150 for four wheels. I can deliver in most of SoCal.

Email me at [email protected]

[sokoloka]

The combo that's pictured on the car: 18's all around or 18 front and 19 rear?

[coolwelder62]

This is an Awesome deal for someone.:thumbsup:

[ronniej]

I would like the 18/19 combo shipped to 70605. Why can't the tires be shipped mounted? I can send you a pick of how I've shipped several sets of my viper wheels with tires mounted.

[Steve1968LS2]

I would like the 18/19 combo shipped to 70605. Why can't the tires be shipped mounted? I can send you a pick of how I've shipped several sets of my viper wheels with tires mounted.

Well, I can't box them with tires.. I guess I could put cardboard on the front and shrink wrap them.. but to be honest I don't trust UPS that much and I would hate for the wheels to get jacked up in transit since UPS is known to deny damage claims. And the tires are worn, decent for rollers and them have one more track day left in them.

I didn't think they were worth the weight to ship them.. but if the buyer insists I would.. reluctantly. :)

If buyers want's the tires and is willing to pay the extra freight then ok.. :)

[Steve1968LS2]

The combo that's pictured on the car: 18's all around or 18 front and 19 rear?

18s all around in that picture -- 19s look good, but I changing tires and need a new wheel combo.

This is an Awesome deal for someone.:thumbsup:

Not trying to make any money.. just getting more even on the new wheels I paid for :)

[ronniej]

I just put a front and rear together with the outers facing each other and cardboard in between and on the outside. Shrink wrap the hell out of it. I shipped my viper wheels like this a couple months ago for ~$250. Will the fronts work with a stock subframe? If so, can you email pics to [email protected] and we can make arrangements. Thanks

[Steve1968LS2]

I just put a front and rear together with the outers facing each other and cardboard in between and on the outside. Shrink wrap the hell out of it. I shipped my viper wheels like this a couple months ago for ~$250. Will the fronts work with a stock subframe? If so, can you email pics to [email protected] and we can make arrangements. Thanks

I guess that would work..

The fronts are not for a stock sub.. the offsets would be all FUBAR.. should be close for a DSE, Morrison or other late Vette sub.

[Bsinclair]

steve, i wont have my dse tubs in for a few days and would like to measure how much room i have on my 68. i was told without cutting the frame rails back i wouldnt be able to get a 12 in there without it rubbing with the stance i want. i would like it to tuck the rears and the 19 rears would give me the look i think. i have a jakes rod shop front that uses c5/6 components so im sure the fronts will work. if you have them in a few days i will take them..

[ronniej]

Just my luck... I'm using a stock subframe right now. Oh well, the search continues...good luck with the sale:(

[Steve1968LS2]

steve, i wont have my dse tubs in for a few days and would like to measure how much room i have on my 68. i was told without cutting the frame rails back i wouldnt be able to get a 12 in there without it rubbing with the stance i want. i would like it to tuck the rears and the 19 rears would give me the look i think. i have a jakes rod shop front that uses c5/6 components so im sure the fronts will work. if you have them in a few days i will take them..

No problem.. let me know.. I will have the exact front offset posted tomorrow.

[Ron in SoCal]

I'll take em Steve. Call you in the morning...:cheers:

[Steve1968LS2]

I'll take em Steve. Call you in the morning...:cheers:

Cool deal.. sale pending on the four 18" wheels per PM..

The 19x12s are still available.. Over 50% off wheels that haven't been ran much is a killer deal.

[FETorino]

Cool deal.. sale pending on the four 18" wheels per PM..

The 19x12s are still available.. Over 50% off wheels that haven't been ran much is a killer deal.

As much as Ron likes wheels I'm surprised he didn't buy all 6. :D

[Ron in SoCal]

As much as Ron likes wheels I'm surprised he didn't buy all 6. :D

Some people collect license plates...:lol:

[Flash68]

i have a jakes rod shop front that uses c5/6 components so im sure the fronts will work. if you have them in a few days i will take them..

I've talked to Jake about this (I have his sub too) and I'm pretty sure his dimensions are different from DSE and Morrison subs. Should double check with him.

I'll take em Steve. Call you in the morning...:cheers:

Oh you gotta be sh!ttin me! :lol:

[cencalc6]

Steve your in box is full,im interested on the 19's I can also pick them up

[FETorino]

Oh you gotta be sh!ttin me! :lol:

Set your TIVO for Discovery Channel. We'll see Ron on an episode of Hoarders one day. :rofl:

[Vegas69]

Ron, get help buddy.:lol:

[67zo6Camaro]

I'll take em Steve. Call you in the morning...:cheers:

Sweet, already collecting parts for a new project? :unibrow: :question:

[Matt@BOS]

Sweet, already collecting parts for a new project? :unibrow: :question:

More like you better start making room in your garage for Ron's new wheels. :unibrow:

[Rick D]

I'll take em Steve. Call you in the morning...:cheers:

I think he does it just to mess with us :lol: This way Ron will have his street wheels and race wheels :_paranoid

[Ron in SoCal]

Steve your in box is full,im interested on the 19's I can also pick them up

Phillip I can grab these when I get mine and save you about an hour each way to Steve's. Let me know...

Set your TIVO for Discovery Channel. We'll see Ron on an episode of Hoarders one day. :rofl:

Noooo...saving them for the next time you ask me for hand me downs :D :cheers:

Ron, get help buddy.:lol:

I know...:lol:

I think he does it just to mess with us :lol: This way Ron will have his street wheels and race wheels :_paranoid

Winner! :thumbsup:

[cencalc6]

[QUOTE=Ron in SoCal;438971]Phillip I can grab these when I get mine and save you about an hour each way to Steve's. Let me know...

Sounds Good Ron! Thanks bro :thumbsup: ....Just waiting on Steve to get back to me.

[Rick D]

Winner! :thumbsup:

I call first dibs when you want to sell them :unibrow:

[Steve1968LS2]

Steve your in box is full,im interested on the 19's I can also pick them up

That's why I put my email addy down.. duh! lol

Actually I saw your PM over at PT.com but they are having database issues so I couldn't read it.

Looks like you were first in line for the 19s so you get first dibs.. :)

email me at [email protected]

Oh, and I will be having some various LS bits for sale soon.. stay tuned.

[cencalc6]

That's why I put my email addy down.. duh! lol

Actually I saw your PM over at PT.com but they are having database issues so I couldn't read it.

Looks like you were first in line for the 19s so you get first dibs.. :)

email me at [email protected]

Oh, and I will be having some various LS bits for sale soon.. stay tuned.

lol! Nice talking to you Steve! I will set up a day with ron to pick up the 19" wheels :cheers:

[Gandalf]

Ron - listen to Todd. Do we need to set up a support group section for you or what? Brett - I don't think you're done just yet :-)

Steve - "Enabler - one who enables another to persist in self-destructive behavior"

No better myself but I couldn't sit and say nothing!
G.

[Ron in SoCal]

Ron - listen to Todd. Do we need to set up a support group section for you or what? Brett - I don't think you're done just yet :-)

Steve - "Enabler - one who enables another to persist in self-destructive behavior"

No better myself but I couldn't sit and say nothing!
G.

You guys are my support group :lol: :cheers:

[Steve1968LS2]

All wheels are sold.. if anything falls through you'll be notified in the order that you sent emails.. thanks!

Well, at least my stuff sells pretty fast.. lol