Added Some New Tool's

[coolwelder62]

I have working on a few thing's other than Car's. http://i1104.photobucket.com/albums/h324/bmock5/chevelleIII015.jpghttp://i1104.photobucket.com/albums/h324/bmock5/chevelleIII014.jpgA few month's ago started build my own 4X4 CNC Plasma Table.The gantry kit came Precision plasma.com,and the control came from CandCNC.com.It took me about 2 months to get all put togather and wired up.And bought a new Hypertheme powermax 85 to cut with.The heaviest material I have cut so far is 1/4".I cut all the C-6 weld in clip chassis parts out with it.The hard part for me has been learning the PC part of it.I also built a roll around stand for my Mitler bros punch and die & louver press.http://i1104.photobucket.com/albums/h324/bmock5/chevelleIII018.jpg http://i1104.photobucket.com/albums/h324/bmock5/chevelleIII019.jpghttp://i1104.photobucket.com/albums/h324/bmock5/chevelleIII020.jpgI am hoping to be able to adapted the press to work with my Holohan tru-ovals punch's.

[Bad94]

Scott i wish your shop was closer to us.

[Greg from Aus]

Nice new toys.

Greg

[coolwelder62]

Scott i wish your shop was closer to us.I wish I was across the street from Everybody.

[coolwelder62]

I also up graded my Mitler Bros bead roller to a 36" w/ind motor.http://i1104.photobucket.com/albums/h324/bmock5/chevelleIII017.jpghttp://i1104.photobucket.com/albums/h324/bmock5/chevelleIII016.jpgIt work's really well on 16 ga.I had a 24" unit w/std. motor,gave it to a good friend.

[coolwelder62]

Nice new toys.

GregIt's a mazing how much extra cash you have at the end of the month when 3 of your 4 kid's move out.:lol:

[Rick D]

Very nice Scott, I love when I get new tools for the shop! Now that I have my new Miller tig my next is a bead roll or tubing bender not sure which will come first?

[Sieg]

Those pic's are better than Playboy.......at least in this moment. :unibrow:

Nice stuff Scotty. :thumbsup:

[coolwelder62]

Very nice Scott, I love when I get new tools for the shop! Now that I have my new Miller tig my next is a bead roll or tubing bender not sure which will come first?I would start with the one you think you might use the most and then work the other direction.:thumbsup:

[coolwelder62]

My New Jancy Radius Master showed up today.It has 5 differant spindle size's for shaping part's.It need's a heavier base.Maybe something around 20"square x1/2" plate.Ordered it from Trick Tool's thurs. here today.Cool!!!!!! http://i1104.photobucket.com/albums/h324/bmock5/part4008.jpghttp://i1104.photobucket.com/albums/h324/bmock5/part4007.jpghttp://i1104.photobucket.com/albums/h324/bmock5/part4006.jpghttp://i1104.photobucket.com/albums/h324/bmock5/part4005.jpghttp://i1104.photobucket.com/albums/h324/bmock5/part4004.jpghttp://i1104.photobucket.com/albums/h324/bmock5/part4003.jpg

[Ron in SoCal]

Living the dream Scott! Make sure you leave room in the shop for all those cool cars and tools...:cheers:

[Sieg]

For a base maybe a dead flywheel off a Cat or Detroit diesel engine?

[coolwelder62]

For a base maybe a dead flywheel off a Cat or Detroit diesel engine?I don't want have to use my fork lift to move it.:lol: I think I see if I have some 1/2" or 3/4" plate.

[coolwelder62]

Living the dream Scott! Make sure you leave room in the shop for all those cool cars and tools...:cheers:Ron,I just desided to buy some of thing's I been needing to make me a good welder.The saleman said in order to be a good welder you have too have good tool's.:willy: :willy:

[detailing_dude]

First of all that's some nice tools, trying to get some information on a plasma cutting table, looked at the web site that you mentioned and was wondering how does your table perform

[badmatt]

I don't want have to use my fork lift to move it.:lol: I think I see if I have some 1/2" or 3/4" plate.

Old semi brake drum!

[coolwelder62]

First of all that's some nice tools, trying to get some information on a plasma cutting table, looked at the web site that you mentioned and was wondering how does your table performThe table work's awesome.The hard part for me is learning draw in CAD.Once I have the part In a DXF file you download it on a flash drive and plug it in the USB port on the PC.And it's easy.I have about 10K invested in the whole system (including the new hypertherm power max 85 w/machine torch & a hand torch also.It was pretty easy to assem.Give me a call and I can steer you in the direction I went.I havent had the time to spend w/the table I would like too, because I alway seem to have something else to do.Maybe this winter if things slow down I would like too start doing so Cowboy art.

[detailing_dude]

Thanks, will do. Have been working on a few cars just want to set up the shop.

[GregWeld]

Ron,I just desided to buy some of thing's I been needing to make me a good welder.The saleman said in order to be a good welder you have too have good tool's.:willy: :willy:




That's just a load of crap! Ask me how I know.... :wow: :rofl:

[coolwelder62]

That's just a load of crap! Ask me how I know.... :wow: :rofl:Greg,I know what your problem is,I see your quote say's I have SOME tool's.Maybe you didn't buy Enough Tool's.You need to buy MORE!!!!!!!.:rofl:

[GregWeld]

Greg,I know what your problem is,I see your quote say's I have SOME tool's.Maybe you didn't buy Enough Tool's.You need to buy MORE!!!!!!!.:rofl:



I'm adding stuff as fast as Charley tells me to!!! :willy: :willy: :willy: :faint:

[GriffithMetal]

Nice tools! I'm super jealous of the plasma table! Makes cutting the thick stuff so much easier.

[coolwelder62]

Nice tools! I'm super jealous of the plasma table! Makes cutting the thick stuff so much easier.Thanks man,I just can't wait until I can learn how to turn on the PC.:wow:

[wiedemab]

Scott,

You probably already have a 2D CAD program, but if not you may want to check out DraftSight.

It is from the folks that make Solidworks and is free to all users. I'm messed with it a little bit and as far as I can tell it is pretty much the same as AutoCAD LT - -even the commands are the same.

http://www.3ds.com/products/draftsight/overview/

[coolwelder62]

Scott,

You probably already have a 2D CAD program, but if not you may want to check out DraftSight.

It is from the folks that make Solidworks and is free to all users. I'm messed with it a little bit and as far as I can tell it is pretty much the same as AutoCAD LT - -even the commands are the same.

http://www.3ds.com/products/draftsight/overview/Thanks Brandon,I will check it out.I need all the help I can get.:thumbsup:

[wiedemab]

If you ever need anything drawn up in 2D, I'd be happy to help too!

You can always print it on paper to make sure it's what you want before cutting it.

You'll pick up the 2D stuff pretty quickly.

[coolwelder62]

If you ever need anything drawn up in 2D, I'd be happy to help too!

You can always print it on paper to make sure it's what you want before cutting it.

You'll pick up the 2D stuff pretty quickly.Thanks for the offer.:thumbsup: The only thing I seem to pick up quickly is a hamburger.:lol:

[coolwelder62]

Sopme of the things I learning to cut.http://i1104.photobucket.com/albums/h324/bmock5/ChevellexvI012_zps4d97fb2c.jpghttp://i1104.photobucket.com/albums/h324/bmock5/ChevellexvI011_zps67b3d1c8.jpghttp://i1104.photobucket.com/albums/h324/bmock5/ChevellexvI010_zpsf736f66b.jpgThe suspension pcs. are for Jon Feltis here on Lat-G.

[Sieg]

Nice Scott, looks like you've got hang of the system. :thumbsup:

[coolwelder62]

Nice Scott, looks like you've got hang of the system. :thumbsup:working on it.Learning feed rate's and cutting amperage is tuff. The plasma cutter manual is off some what.:thumbsup: I wish I had enough parts to cut everyday.

[Jtomas801]

The brackets look great, they should work awesome.

Thanks again for your help!:thumbsup:
Jon

[GregWeld]

Okay..... so we know you can make holes.....:poke: :lol:


Does it fry chicken??

[coolwelder62]

Okay..... so we know you can make holes.....:poke: :lol:


Does it fry chicken??Greg,Have you seen me.Does it look like I should be eating fried chicken.I have to eat it skinless & baked.:lmao:

[coolwelder62]

Everytime I try too pull the 3/8 3rd. member stud's in a ford 9" housing alway's seem to mess up aleast one stud.Then have to go back and chase the thread's. Well last night I made this new tool too press them in from now on. Tried it today worked great.http://i1104.photobucket.com/albums/h324/bmock5/studinstaller010_zpsb4e741ad.jpghttp://i1104.photobucket.com/albums/h324/bmock5/studinstaller004_zpsd481e903.jpg

[GregWeld]

Greg,Have you seen me.Does it look like I should be eating fried chicken.I have to eat it skinless & baked.:lmao:




http://i919.photobucket.com/albums/ad33/gregweld/Fun%20Fotos/file-19.jpg

[coolwelder62]

http://i919.photobucket.com/albums/ad33/gregweld/Fun%20Fotos/file-19.jpgThat's funny,:lmao: :lmao:

[Operations]

Where did you get your Radius Master?
I need one of those
Thanks

[coolwelder62]

Where did you get your Radius Master?
I need one of those
ThanksTrick-Tools.com /I love it.

[coolwelder62]

I've had my snap-on tool box for the better part of 26 year's.So did some tradin,and dealin and picked up a new Snap-on Eqip box.The color change is kinda nice to.

[ccracin]

I've had my snap-on tool box for the better part of 26 year's.So did some tradin,and dealin and picked up a new Snap-on Eqip box.The color change is kinda nice to.

Dang Scott, that is wicked nice. There are people that live in less! Now fill it up!

[67zo6Camaro]

Hollllly smokes! That's a big rig. Very nice set-up.

[67zo6Camaro]

Holllly smokes! That's a BIG RIG. Very nice set-up.

[coolwelder62]

The new unit is 2 84"Eqip's side by side.My old box was a 1pc. 144" long w/a side locker on each end.I have more storage with the new. It's helping me really get orgz.That's the goal to 2014 is get totally orgz. Time is money.Plus, being 50 now I don't have much time left!!!!!

[Sonar Chief]

That is a nice collection of tools ... holy crap! If you need more room I could use a Miller 211 or ...... something like that! lol

Really nice stuff there, I'm still plugging away on the Camaro in my one car and no tools! :action-smiley-027:

[coolwelder62]

That is a nice collection of tools ... holy crap! If you need more room I could use a Miller 211 or ...... something like that! lol

Really nice stuff there, I'm still plugging away on the Camaro in my one car and no tools! :action-smiley-027:Thanks Michael.:thankyou: