PDA

View Full Version : 65 Nova - Pro Tour - Sell or Trade?


MillerBuilt
09-09-2012, 05:02 PM
1965 Chevy Nova - Project - For Sale OR Trade?


This CA car has been stripped of ALL items; media blasted (inside, outside, bottom side), then sprayed in black epoxy primer. The body is NOT straight and will need work to be straight, but it is rust free with the exception of a few VERY minor spots.

Most everything that was removed (worth keeping) from the car is included in the sale; it was my intention to replace most all items with new OR restored ones. So when evaluating this build to its completion, please assume you will be supplying various new items that are not listed below to complete this car (i.e. glass, interior, 3rd member, axles, driveline, wire harness, engine, radiator, clutch/pressure, wheels, tires etc.) to its utmost potential.

PRICE ……………………..………….……… $40,000

*desired possible trades: 63-67 Nova’s, 67-69 Camaro’s. But feel free to send me ALL clean offers.
*trade vehicles must be super clean…


Below I have supplied a very detailed list of parts & associated costs for your convenience while evaluating your potentially new project. If you have any other questions on what is included or not, please do not hesitate to ask.
FYI - Grand Total on all items listed below …….… $49,798.56


Original Vehicle Value & Misc. Labor to Date:

1965 Chevy Nova - solid CA specimen ……………………………………….…… $4500.00
Strip Car/Media Blast/Epoxy Prime (labor) …….……………….…………….. $1800.00
Install DSE Mini Tubs, QUADRA-Link & Frame Connectors (labor) ... $2250.00
Total …………….. $8,550.00


Front Suspension/Steering:

DSE Front Clip - black powder coated/assembled ………………………….. $6450.00
DSE Double Adjustable Shock Upgrade……………………………………….…… $ 220.00
DSE “LS” Engine Mount Kit ……………………………………………..………….…… $ 250.00
DSE Inner Fender Kit - (raw) ……………………………………………………………. $ 750.00
IDIDIT Tilt Steering Column ……………………………………………………………… $ 416.50
DSE “Stainless” Steering Coupler Kit …………………………….…………………. $ 285.00
DSE Power Rack & Pinion Stainless hose kit ……………………………………. $150.00
DSE Shipping Costs at Time of Purchase …………………………………….…… $ 867.39
SKF - Heavy Duty C7 Hub Bearing Units …………………..…………..………… $ 300.00
TOTAL ……………. $9,688.89


Front Brakes:

OEM - C6 ZO6, 6-piston Monoblock Brake Calipers - Silver ………..…. $ 850.00
DBA - Club Spec 4000 T3 Brake Rotors - 13.976” x 1.256”….…….….. $ 450.00
HAWK - HPS Pads, part#HB658 F.570 …………………………………………….. $ 198.69
WILWOOD 7/8” Master Cylinder - Polished ………………………………….….. $ 239.98
TOTAL …….….…….. $ 1,738.67

Rear Suspension:

DSE QUADRA-Link Suspension Kit …………………………………………….……… $3120.00
DSE Double Adjustable Shock Upgrade ……………………………………….…… $ 220.00
DSE Mini Tubs ……………………………………………………………………….………….. $ 470.00
DSE Frame Connectors ………………………………………………………….………….. $ 190.00
DSE Shipping Costs at Time of Purchase ………………………………………….. $ 155.70
STRANGE 9” w/DSE suspension brackets & C6 Flange Ends ……………. $1600.00
SKF - Heavy Duty C7 Hub Bearing Units for above C6 Flange Ends…. $ 300.00
TOTAL …………….. $6,055.70


Rear Brakes:

OEM - C6 ZO6, 4-piston Monoblock Brake Calipers - Silver ….………. $ 825.00
DBA - Club Spec 4000 T3 Brake Rotors - 13.976” x 1.256” …….……. $ 425.00
HAWK - HPS Pads, part#HB658 F.570 …………………………………………….. $ 159.38
OEM - C6 Corvette, Complete Parking Brake Set-up ….……………………. $ 400.00
Misc. - 3/16” Stainless tubing / brake fittings ……….……………………….. $ 200.00
TOTAL ……………… $2,009.38


Exhaust:

DSE “LS” Stainless 1-7/8” Headers ……………………………………………..…..…… $2230.00
DSE 3” Stainless V-Band Clamps ………………………………………………..….…….. $ 125.00
SPINTECH Stainless Mufflers & Stainless Oval tube Exhaust System ….. $3200.00
TOTAL ……………… $ 5,555.00



Transmission:

TREMEC/HURST T-56 Magnum w/install Kit (2.66-1st; .63-6th gear)... $ 3600.00
TREMEC/HURST T-56 Magnum Hydraulic Kit ……………...……………..……….. $ 405.00
QuickTime SFI Approved Bell Housing LS to T-56 …………………………………. $ 612.97
DSE Billet Shifter Knob ………………………………………………………..…………………. $ 45.00
Custom Stainless Tube Transmission Cross member …………………………….. $ 375.00
TOTAL …………..…… $4,600.00


Engine:

Not Included


Fuel System:

RICK’S Stainless “Stealth” Tank - A1000, 100 Micron Filter, 0-90ohm …. $2000.00
AEROMOTIVE Electric Fuel Pump Controller ……………………………….……… $ 326.95
Total ..................... $2,326.95


Interior:

65 Nova SS Bucket Seats w/tracks “black” (driver condition) ………………. $ 500.00
Rear Bench (frame only) - already modified to fit DSE Mini Tubs ………… $ 350.00
CUSTOM Stainless Steel Roll Cage (no paint needed LOL!) .................. $3400.00
Total …………………. $4,250.00



Trim/Hardware:

NEW - Headlight Bezels, Eye Brows, Retaining Rings ………………………….. $ 454.46
RESTORED - Original Grill - Bright Dipped/Clear Anodized …………………… $ 750.00
RESTORED - Original Die Cast Hood Emblem - Re-Chromed ………………… $ 450.00
RESTORED - Original Die Cast Trunk Emblem - Re-Chromed ………………… $ 650.00
RESTORED - Original Tail/Back-up Light Assemblies - complete ……..……. $ 350.00
NEW - Upper/Lower Door Hinges, Bolts ……………………………….……………… $ 259.78
NEW - L/R Exterior Door Handles Assemblies ………………………………………. $ 88.95
NEW - Front/Rear Windshield Seals, Trunk Seal ………………………………….. $ 165.40
Total …………….. $2,968.59


More Included Items:

DSE Battery Relocation Kit ……………………………………………………………….……… $ 340.00
DSE Bright Driver 7” Headlight Kit ........................................ .......... $ 195.00
VINTAGE AIR - Gen IV Magnum “Sure Fit” Kit 62-65 Nova …………….…….. $1334.95
VINTAGE AIR - Streamline 4-way Inline Bulkhead …………………………….….. $ 64.95
DSE Billet Headlight, Wiper, Heat/AC Knobs & Wiper Knob Bezel …....….. $ 120.48
Total ……….….. $2,055.38

MillerBuilt
09-09-2012, 06:34 PM
36821

36822

36823

36824

36825

36826

MillerBuilt
09-09-2012, 06:37 PM
36827

36828

36829

36830

36831

36832

36833

36834

36835

36836

MillerBuilt
09-09-2012, 07:02 PM
New pics soon

coolwelder62
09-09-2012, 08:46 PM
Wow!!!! What an awesome project.GLWS.:thumbsup: :thumbsup:

Rick D
09-09-2012, 08:53 PM
Very nice start to the project!! I have been wanting to build another nova ever sines I sold my 67 years ago. Wish I had the cash I would be all over this :thumbsup:

GLWS!!!!

MillerBuilt
09-09-2012, 09:09 PM
Wow!!!! What an awesome project.GLWS.:thumbsup: :thumbsup:

Very nice start to the project!! I have been wanting to build another nova ever sines I sold my 67 years ago. Wish I had the cash I would be all over this :thumbsup:

GLWS!!!!

Thanks Guys, if someone truly is looking to build a 1st Gen Nova......... this would be a great jump start, and a 13K plus savings! :yes:

strtcar
09-10-2012, 04:55 PM
very nice car, doesn't make you sick seeing all that $$ added up, esp the exhaust price....

MillerBuilt
09-11-2012, 09:13 PM
very nice car, doesn't make you sick seeing all that $$ added up, esp the exhaust price....

Thanks. Yes the $ does add up pretty quick...... I knew I had better lay it out there though, for some the 42K asking price would seem rediculous without itemized proof. I did sink some coin into the exhaust..... but stainless just seams to have a unique sound to it that I could not resist! :yes:

coolwelder62
09-11-2012, 10:06 PM
Wow!!! This build has all the good part's we all dream of.GLWS.:thumbsup: :thumbsup:

JasonElvisHeard
09-15-2012, 08:51 PM
http://thegmr.com/wp-content/uploads/2012/09/DSC02907.jpg

http://thegmr.com/wp-content/uploads/2012/09/DSC02917.jpg

http://thegmr.com/wp-content/uploads/2012/09/DSC02919.jpg

http://thegmr.com/wp-content/uploads/2012/09/DSC02923.jpg

http://thegmr.com/wp-content/uploads/2012/09/DSC02928.jpg

http://thegmr.com/wp-content/uploads/2012/09/DSC02951.jpg

http://thegmr.com/wp-content/uploads/2012/09/final-3.jpg

Jay@GMR
10-01-2012, 05:35 PM
Bump.....:)

coolwelder62
10-01-2012, 07:51 PM
This would be a great start for someone.GLWS!!!!!:thumbsup: :thumbsup:

MillerBuilt
10-01-2012, 08:36 PM
This would be a great start for someone.GLWS!!!!!:thumbsup: :thumbsup:

Thanks! It is a great project that I hope goes to a great home. I would love to see it out competing with the big boys! I have a potential 69 Camaro deal on the table, just waiting on pictures. We will see :question:

imjustjames
01-31-2013, 04:13 PM
Good luck,

Obvious that a lot of work went into the car, as well as putting your ad together.