LS9 Mock engine - where from

[Amituk]

Guys.

Where can I get an mock engine and t56 trans?

Cant quite afford the LS9 yet but want to get cracking on the chassis build

Cheers
Amit

[badmatt]

regular LS block?

5.3 ect?

[Jgpclone]

bare 4.8 would be the cheapest route some people i know just throw them away lol:lol:

[Simmo]

Here's an option

http://www.summitracing.com/parts/PYP-2046/

[GregWeld]

P-Ayr also makes foam transmissions etc so you can really mock the entire thing up...


http://www.payr.com/index.htm

[Ron in SoCal]

All LS blocks have the same exterior dimensions so you can at least measure placement in the sub, but an LS9 accessory drive (or oil pan) may interfere w a rack/rails depending on which sub you're running or building.

[IMPALA MAN]

May or may not affect your situation, but the A/C compressor is located in a different location. It's on the lower passenger side of the engine on the LSA.

[Amituk]

Thanks for the info guys..

Might have to try and build some flexibility into the sub frame.

I had a look at the payr site and I couldnt find any t56 magnums on there.