Musclerodz
08-27-2012, 11:05 PM
Digi-Tails has released sequential tail lights for the 66-67 Novas. They fit behind the factory lense, and install just minutes. It does however take a little longer to wire them up. I had them installed in about 20 minutes and took me another hour to wire them in since I soldered the connections rather than using the connectors in the kit.
Price is $189 and since they already have the fronts, our standard offer of including the flasher for free and free shipping when purchasing both front and rear kits. We have been given an exclusive on these for a couple weeks, so don't hesitate tot give me a call or place your order online.
Here is a quick run down of the install.
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/386935_465920650115412_1492484073_n.jpg
Remove lenses and sockets from bezel. The bezel can be left on the car.
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/539340_465920866782057_250699195_n.jpg
Route harness through bezel and plug into correct LED board, they are side specific.
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/298714_465921000115377_120935194_n.jpg
Remove double stick tape, locate, and attach to bezel. Reinstall gasket and lenses
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/553748_465921026782041_1771430401_n.jpg
Install grommet and wire provided harness kit into factory body harness per instructions.
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/549739_465921070115370_1873311914_n.jpg
Here is the running light light. Very cool effect!
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/523234_465921096782034_1584522438_n.jpg
Price is $189 and since they already have the fronts, our standard offer of including the flasher for free and free shipping when purchasing both front and rear kits. We have been given an exclusive on these for a couple weeks, so don't hesitate tot give me a call or place your order online.
Here is a quick run down of the install.
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/386935_465920650115412_1492484073_n.jpg
Remove lenses and sockets from bezel. The bezel can be left on the car.
http://sphotos-b.xx.fbcdn.net/hphotos-prn1/539340_465920866782057_250699195_n.jpg
Route harness through bezel and plug into correct LED board, they are side specific.
http://sphotos-b.xx.fbcdn.net/hphotos-ash4/298714_465921000115377_120935194_n.jpg
Remove double stick tape, locate, and attach to bezel. Reinstall gasket and lenses
http://sphotos-b.xx.fbcdn.net/hphotos-ash3/553748_465921026782041_1771430401_n.jpg
Install grommet and wire provided harness kit into factory body harness per instructions.
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/549739_465921070115370_1873311914_n.jpg
Here is the running light light. Very cool effect!
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/523234_465921096782034_1584522438_n.jpg