1970 Pro Touring DAR/T

[-Freak-]

I was nudged into creating a build thread.

So the story goes...

Once upon a time I had a 71 Dart that I turbocharged and was going to do body work on it over the winter. After removing a few panels and fenders, the car was diagnosed with cancer and had 6 months to live.
It was sent down the road and I picked up a cancer free 70 Dart from Arizona to start a new build on.

As you will see this build took and entirely different direction then the last build.

Delivery picture from 6/10
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG_1045.jpg

5/11
8 3/4 diff, Large Bolt pattern hubs and wheels, Disc front brakes.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG_1329-2.jpg


And then the tear down started so it could go on the rotisserie.


Found 2 build sheets.

Back seat.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/buildsheet_underseat.jpg

Under the carpet.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/cleanfloorpans.jpg
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/buildsheetundercarpet.jpg

[-Freak-]

Been looking all over for a 46RH. Found a few, all but one were to expensive and trashed. Went and checked out the one today at the bone yard but it turned out to be the non lockup version. I did however score a 42RH.
Its not as stout but it should do the job for a few years.

bye bye 904TF, hellow 4 speed OD!
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG-20120208-00109.jpg





We are doing this build at my friends shop.
http://www.gcrods.com/index.html

USCarTool SFC's were fitted.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/USCARTOOLSFCFittingdriversside.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/ThebeginingHDR1280.jpg

[-Freak-]

Had the bottom of the car sand blasted for $200. BEST $200 I've ever spent!

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG-20120218-00213.jpg

Only found one problem spot.

Rear passenger trunk area.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG-20120218-00209.jpg

[-Freak-]

Making room for a fuel cell.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG-20120225-00250.jpg


Sub-frames installed. Just need to be grinded and seam sealed.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG-20120225-00266.jpg

[-Freak-]

Reilly Motorsports spring relocation kit was installed.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-03-02_23-41-13_778.jpg


Minitubs
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-03-24_17-07-06_799.jpg

Patch panel in the trunk to replace the only rotten spot i've found on the car.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-03-24_17-46-58_217.jpg

[TomM]

Nice job so far. It sure is good to have a solid car to start with....keep up the good work... :thumbsup:

T,

[-Freak-]

Lower Radiator support installed.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-03-25_17-27-13_562.jpg

[-Freak-]

Test fitted some 315 35R17's on the Dart since the mini tub is done.

Decided to step it up finally and pulled out the good camera.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Steam-Roller.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Steam-Roller3.jpg[/QUOTE]

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Steam-Roller2.jpg

[-Freak-]

Whhaaaat is this? A Cuda hood on a Dart? I must have hit my head. :D
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-04-06_19-59-20_819.jpg[/QUOTE]


Bye Bye torsion bars. You won't be missed.
Hello HemiDenny K member!
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-04-25_22-17-47_668.jpg

[-Freak-]

Nice job so far. It sure is good to have a solid car to start with....keep up the good work... :thumbsup:

T,


Thanks Tom!

[-Freak-]

Trunk floor pan partially welded in at this point.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Trunk-pan-partial-weld.jpg

Mini tub.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/IMG_9655.jpg[/QUOTE]

[-Freak-]

Anyone interested in a K member for a Mopar A body. I HIGHLY recommend getting in contact with HemiDenny on forabodiesonly.com. Been absolutely great to deal with. Product fits perfectly, no massaging, no install issues, the guy knows what he is doing and does it perfectly.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Dennys_K_Member-and-parts.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Welds2.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Welds.jpg

[-Freak-]

Badarts radiator support and Denny's K.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/K-in-car.jpg

Its going to look like jewelery once its powder coated. I'm just trying to decide what color.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/K-in-car2.jpg

[-Freak-]

Anyone know where these go?

I turned my back and the plasma cutter got a mind of its own. :lol:

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-04-29_19-31-11_723.jpg

I think I found where they were at.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-04-29_19-32-02_360.jpg

[67XR7]

Awesome Build! I will be following this one for sure!!!

[-Freak-]

Awesome Build! I will be following this one for sure!!!

Stay tuned. I've got a bit more to get you guys up to speed on. :thumbsup:

[-Freak-]

ECI Mustang II "Big" Brake Kit for the front.
http://www.ecihotrodbrakes.com/musta...nversions.html

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-05-16_16-39-42_26.jpg[/QUOTE]

[-Freak-]

One more piece of the puzzle.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-05-28_10-13-50_61.jpg

27.5x19 Griffin radiator is mounted. Think it turned out nice.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-05-29_21-24-39_427.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-05-29_21-24-03_926.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-05-29_21-23-20_837.jpg

[-Freak-]

Hagen fuel door installed. No more crooked fuel cap

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-07_21-22-32_572.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-07_21-50-46_511.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-13_21-37-04_95.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/fuel-fill-tube.jpg


http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-07_21-55-42_406.jpg

[-Freak-]

Nice and tucked out of the way.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-13_22-17-24_620.jpg

[-Freak-]

Here is the test panel and multiple pictures so you can see how it changes based on the light.

Loud and obnoxious, just like Ma Mopar liked them.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-27_06-08-19_419.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-26_20-15-51_355.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-26_20-14-10_782.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-26_20-15-58_429.jpg

Took a picture with the good camera. And I still can't capture the color correctly. Cameras have a real hard time with this color.
Even the factory car I got the color from shows up different in every picture I've seen.

3 stage paints are awesome.
Can't wait to see how it shows off the body lines of the hood and the rest of the car.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Dart-Paint-Choice.jpg

[-Freak-]

Fuel pump is mounted.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-29_21-38-32_780.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-29_21-58-26_630.jpg

View from the back side.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-29_22-28-14_696.jpg


Put the Dougs headers in place so I can see where the lines need to run to avoid the exhaust.
I'm pretty dang happy with the headers so far. They fit like a glove and clear the transmission crossmember.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-29_22-14-45_454.jpg

[-Freak-]

Fuel line, transmission lines have been run.
Mounted the line lock and ran some of the brake lines.
I need to remake the one line with stainless and run the front and rear brakes yet.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-30_18-54-39_506.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-06-30_18-53-08_627.jpg

[-Freak-]

Column is partially mounted.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-08_20-09-40_407.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-08_20-11-31_520.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-08_20-11-02_20.jpg

[demon34071]

Great build. Keep up the good progress.

Derek
demon34071 - on fabo
demon71 - on moparts

[groovyjay]

Nice to see one of these getting build the right way! :thumbsup:

[SuperB70]

Great work, keep it up! I like those 315 in the back.

I use to own a '70 Dart, more pro street- / 1/4 racer-style.

I'm going to follow this one...

[76orangewagon]

Shawn,
The cars looking great, for some reason the pics look better here. keep up the good work.

[65 347]

Cool project! Love the color.
Mike

[tones2SS]

Awesome, awesome build. Love the dash and color.
Keep us posted.

[-Freak-]

Shawn,
The cars looking great, for some reason the pics look better here. keep up the good work.

Thanks Ross.

[-Freak-]

Feels great being able to sit in the car again and hang onto a steering wheel.

All the way forward.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-20_21-25-12_786.jpg

All the way backward.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-20_21-25-47_277.jpg

Piece of cake getting in and out of the back seat.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-20_21-26-09_264.jpg

[-Freak-]

Hood graft is complete. I'm extremely pleased with it.

Click on the image to watch the walk around video.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/th_2012-07-17_20-14-53_471.jpg (http://s160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/?action=view&current=2012-07-17_20-14-53_471.mp4)

[demon34071]

What kind of seats and floor brackets did you go with? I like how they slide forward an also how they do not seem too high / close to the roof.

[-Freak-]

Scat Pro Car Elite Lumbar series with the Scat brackets.

Going to have to massage the passenger side bracket.

[RAZIN CAIN]

Killer build...love them Darts.Question were did you get those paint test panels?

[-Freak-]

Killer build...love them Darts.Question were did you get those paint test panels?

Buddy works at a body shop. He shot the panel for me, not sure were they source those test panels from.

[Ron in SoCal]

Buddy works at a body shop. He shot the panel for me, not sure were they source those test panels from.

PPG uses something similar. I think all the paint manufacturers have them for their shops. I like HOK's because it catches the light nicely from different angles.

I love the color, BTW...:thumbsup:

[unrulyprocuda]

the color almost looks like mine maybe a little darker nice build goodluck i sold mine before finishing it

[-Freak-]

the color almost looks like mine maybe a little darker nice build goodluck i sold mine before finishing it

I remember watching your build progress. That car was a crown jewel.

[-Freak-]

Hood is on, front and rear spoiler is on. I had to do a mock up at this point and just put a couple bolts in here and there.
If was a good feeling to see all my ideas coming together right in front of me.
The car looked big and long sitting inside the shop. Funny thing is, as soon as i pushed it outside and it was near other vehicles it looked small.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-21_15-38-11_656.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-21_17-32-28_827.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-07-21_17-32-47_621.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/side-shot.jpg

Almost time for BODY WORK!!! wooo hoooo!!!!

[OLDFLM]

Just wondering... can you flip the top of the spoiler 180 degrees? Thinking it might flow better with the lines of the car?

My Dad was a Mopar guy, so I know it's a Mopar piece but it just doesn't work for me as is... maybe if it mirrored the shape of the rear signal opening or line up with that rear quarter seam?

Just throwing it out there for thought and conversation... love everything else you're doing with the car ... honestly, as far as the spoiler goes, it's not my car and I'm a Pontiac guy so what do I know!

Subscribed! :thumbsup:

[-Freak-]

It can't be flip flopped based on how the legs mount to the spoiler.

[waynieZ]

Nice job the hood looks great.

[unrulyprocuda]

Thanks yours is looking good. Whats your projected finish date
heres a sneak at what im cooking up this time i will see this one thru to the end

69 dodge daytona pro touring

[-Freak-]

No projected finish date. It gets done when it gets done. Hopefully sooner then later.

[DTM Racing]

Some interesting mods for sure. Makes me miss my 70 Dart. Can't wait to see the finished product!

[tones2SS]

Awesome. I love how there is just a touch of headers peeking down under.:thumbsup:

[-Freak-]

And so it begins!
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-08-14_19-04-50_233.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-08-14_19-41-47_0.jpg

[89 RS]

Great Mopar build. :thumbsup: I'm definitely watching this one, some cool stuff you're doing.
I read where you talked about maybe having to massage the passenger seat a bit. I've got Scat seats with Scat brackets in my Camaro and I cut two notches of the ears on the brackets off so that there was only one notch left for the bolt. I called the company before I did any cutting and they said it would not affect the integrity of the remaining ear/bracket. I did it so I could get my seats as close to the floor as possible.

[-Freak-]

I really need to take out the good camera more often.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Paint-booth.jpg

Back onto the lift to get the rear anti sway bar installed and finish welding up the stuff on the under side of the car.
Then it will go back on the rotisserie for the final body work and paint.

The cell phone is just so much handier for taking pictures.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-09-12_19-01-08_175.jpg

[Ripped]

I like it. Nice work on the hood BTW.

[WSSix]

Nice color :thumbsup:

[76orangewagon]

Nice color :thumbsup:

I believe thats just primer.

[R.A.D]

looking good........ whats the good camera?

[-Freak-]

looking good........ whats the good camera?
A Canon XTI that i've had for years.
Someday I'll upgrade, probably right after this money pit is on the road.

[tones2SS]

Great build. You don't see many pro-touring Darts out there.

[WSSix]

I believe thats just primer.

Well then, that's a freaking awesome camera!



Yeah, I missed the typing between the pictures that explains it is primer. Here I was thinking it was a light gray instead of silver. With the right accents and accessories, I think a gray would look good

[76orangewagon]

Well then, that's a freaking awesome camera!



Yeah, I missed the typing between the pictures that explains it is primer. Here I was thinking it was a light gray instead of silver. With the right accents and accessories, I think a gray would look good

Here's a Scion color that could easily be confused for clear coated primer, I actually considered it for my build ....the official name is Cement

[-Freak-]

I'm never 100% certain on a color until its on the car. :D

[WSSix]

Cement is a good name for that color:D

[Tincup]

Nice to see the progress, keep it up....

[-Freak-]

Seam sealed and ready to have the bottom shot black.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-10-06_11-29-26_311.jpg

[-Freak-]

Now that the bottom is shot I need to get the K member and everything else painted so she can be put back on her feet and the rest of the body work done.


http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-10-17_19-18-04_154.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-10-17_19-18-35_987.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-10-17_19-18-46_587.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-10-17_19-18-57_746.jpg

[-Freak-]

Which one is the Viper Very Orange Pearl and which one is the Arancio Argos?

The short stick is the VVOP. The VVOP looks damn near the same except basecoat/clear and is less expensive.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_3921.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_3915.jpg

[WSSix]

Both colors look great! If cost is a factor, the VVOP would get my nod for looking fantastic and being less expensive. But I'm cheap like that.

[-Freak-]

Final block sanding, almost ready for sealer and paint.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/2012-12-01_19-32-18_665.jpg

[-Freak-]

Jason seam sealing the drip rails.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4137.jpg

The auto timer on the camera busted my attempt at a covert pic.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4157.jpg

Blowing out my arch nemesis!

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4160.jpg

[-Freak-]

These pictures, like in all other pictures of wild colors, don't do it justice.

I'm really happy with the color choice.

Final block sanded, scuffed, taped and tech cleaned.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/preppedforpaint.jpg

Primer sealed
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/PrimerSealed.jpg

Paint
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/paintedViperVeryOrangePearl2.jpg

Cleared
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/ClearedandBright.jpg

[daemon2]

the color looks pretty damn good in the pictures, would love to see it in person.

[WSSix]

That was a good color choice. Coming along nicely. :thumbsup:

[tones2SS]

Awesome.

[AUTODYNAMICS]

Sexy!!!

[Stuart Adams]

Great color.

[67XR7]

These pictures, like in all other pictures of wild colors, don't do it justice.

I'm really happy with the color choice.

Final block sanded, scuffed, taped and tech cleaned.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/preppedforpaint.jpg

Primer sealed
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/PrimerSealed.jpg

Paint
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/paintedViperVeryOrangePearl2.jpg

Cleared
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/ClearedandBright.jpg

:cheering: but then again I've been accused of liking orange cars.

[waynieZ]

The paint looks great, nice job.

[medbali76]

I keep focus on this Dart I really like this project.
I have just sold my 68 Mustang and got a chance to buy a 71 Dart.
I have never had any Mopar maybe it's time to get one.
The front suspension looks pretty nice.
How about the rear? Is there any existing coil over suspension on the market?

[-Freak-]

RMS makes a 4 link for the rear which is a pretty nice setup. Most people just make their own though.
http://www.reillymotorsports.com/streetlynx.shtml

[-Freak-]

Windshield is in and to me it made the car come together more.
I have A LOT of stuff to do yet. Trim pieces need to be painted, hood latch and grill need to be painted and put on... the list goes on and on.

I'll be buying little stuff like weather stripping, sound deadening, interior stuff as time goes on.

Maybe I'll be able to roll it outside this winter and get some pictures, but I'm guessing it might not be until summer.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Windshiled-installed_zps762fb962.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Windshiled-installed2_zps95e80de3.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4529_zps5846a6a0.jpg

Almost looks factory.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4539_zpsfe20b0e2.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4571_zps8aeafb6e.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4537_zpsf00eceb4.jpg

[Ripped]

Paint looks nice.

SO, what's the power plant? LA, B, RB or what?

[-Freak-]

Roller LA, cubes are undecided but at least 360 because thats the base motor.

[Ripped]

Roller LA, cubes are undecided but at least 360 because thats the base motor.

Cool, so 408 maybe?

This was mine waay back in the day ;)

http://i550.photobucket.com/albums/ii440/67FEfastback/roadrunner/340-w2-s.jpg

[-Freak-]

I'm planning on a 408. But we shall see when the time comes.
A Procharged 360 has crossed my mind. A Procharged 408 would be even better.

Ross.... SHHHHhhhhhhhhh :)

[FETorino]

Windshield is in and to me it made the car come together more.
I have A LOT of stuff to do yet. Trim pieces need to be painted, hood latch and grill need to be painted and put on... the list goes on and on.

I'll be buying little stuff like weather stripping, sound deadening, interior stuff as time goes on.

Maybe I'll be able to roll it outside this winter and get some pictures, but I'm guessing it might not be until summer.

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Windshiled-installed_zps762fb962.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/Windshiled-installed2_zps95e80de3.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4529_zps5846a6a0.jpg

Almost looks factory.
http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4539_zpsfe20b0e2.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4571_zps8aeafb6e.jpg

http://i160.photobucket.com/albums/t164/Freaks-Photos/70%20Dart/_MG_4537_zpsf00eceb4.jpg

Love it :thumbsup: Doing any vintage style Dodge graphics on it?

[aany001]

I am loving that colour!!!!!!!! Your car looks awesome you have done an outstanding job. Now I need to know what colour that is? Year make and model please. Keep up the great work!!
Thanks

[-Freak-]

Paint is 2008 Viper Very Orange Pearl.

[67XR7]

what is the plan for gauges? wait.... is there a plan for gauges yet?

[-Freak-]

No plan yet. Probably some Autometer series gauges unless something else pops up that looks like a better option.

[tones2SS]

Paint is 2008 Viper Very Orange Pearl.

Looks great!

[SBDave]

That's a trip seeing the Cuda hood on it! Looks great. Any updates on the engine? I've got a LA 360 stripped down that I was planning on building a 408 out of but haven't picked out any parts yet.
keep it up!
Dave