Crossram intake on ebay

[zbugger]

Anyone else see this one? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8044878032&sspagename=ADME%3AL%3ALCA%3AUS%3A31

[almcbri]

those things are insane. I remeber a few months back one went for 12K or something.

[Steve Chryssos]

I tried so hard to get my Offy cross-ram to work across the entire rpm band. I even switched to a pair of Holley 8007 390cfm vacuum secondary Pinto carbs to try and boost the signal and isolate secondary opening function.
But no matter what I tried, the intake would work well in one part of the rev range, but not across the board. The one thing I never tried was throttle body injection. But ultimately, I think as a wet flow design, that intake manifold just does not work on the street. And it's not really feasible to mount direct port injector nozzles unless you could somehow come up from the bottom.

I'm sorry. Is that too much information?

It's cool looking and it's rare. :thumbsup:

[race-rodz]

back when i had my 69 Z/28 (11 years ago) i used to see gm x-rams at swap meets goin for 1500, i guess i shoulda been buyin all i could. :wow:

[rocketman]

hell i think i have one,guess it maybe a good time sell.

[camcojb]

He's on the first gen board. Paid $100 for it from a wrecking yard and about $500 for Mc Neish to restore it. Think he did well! :unibrow:


Jody

[BC69]

Weren't there a couple Ebay auctions with some cross-ram setups going for 20k? It was a while ago, but I thought thats what the number was.

Tim

[Diognes56]

Holy Cow!!! :eek: I could have the engine/tranny/rear end that I want for what the current bid on that intake is!!!

David

[rocketrod]

Weren't there a couple Ebay auctions with some cross-ram setups going for 20k? It was a while ago, but I thought thats what the number was.

Tim
I saw one go for almost $24,000 last year on eBay

[Silverback]

Holy cow… I know of one that went for less then $400 a couple of months ago

I tried so hard to get my Offy cross-ram to work across the entire rpm band. I even switched to a pair of Holley 8007 390cfm vacuum secondary Pinto carbs to try and boost the signal and isolate secondary opening function.
But no matter what I tried, the intake would work well in one part of the rev range, but not across the board. The one thing I never tried was throttle body injection.

I’ve done a ton of screwing around with the early 80’s crossfire setup (basically same design with smaller runners) and always loved it… much better power production across the power band then most comparable setups once you figure out how to work around it’s limitations. I like it so much that I’m converting my full size truck to use one.

But ultimately, I think as a wet flow design, that intake manifold just does not work on the street. And it's not really feasible to mount direct port injector nozzles unless you could somehow come up from the bottom.

Donno, if you think outside the box and turn it into a semi wet flow setup you could get around it’s limitations and have some interesting advantages. I’d move the injectors to the lid right at the runner openings, that way you can use the cooling/detonation control/mixture advantages of wet flow with the delivery and control advantages of dry flow and fix any possible puddling issues that you get with with TBI/carbs

[rocketman]

make me wonder what the #'s matching 69 z28 w/302 crossram,4spd,4.11 12 bolt,4 wheel disc brkes,we restored in the early 90,s would be worth today.might be my retirement fund.