PDA

View Full Version : Vintage air problem versus computer


RdHuggr68
07-12-2012, 06:14 PM
Have a 72 Chevy with Vintage Air GenIV system.The car has an LS motor and the fan only kicks on at 220 degrees. The problem is that when you turn the air on the fan does not come on unless the motor reaches 220. Well that raises all hell with the compressor because the condenser is not getting any air through it.
Without adding another fan for A/C only does anyone know how I can get the existing fan to come on when the A/C is turned on without screwing up the computer?

Thanks , Kevin:cheers:

camcojb
07-12-2012, 07:27 PM
Have a 72 Chevy with Vintage Air GenIV system.The car has an LS motor and the fan only kicks on at 220 degrees. The problem is that when you turn the air on the fan does not come on unless the motor reaches 220. Well that raises all hell with the compressor because the condenser is not getting any air through it.
Without adding another fan for A/C only does anyone know how I can get the existing fan to come on when the A/C is turned on without screwing up the computer?

Thanks , Kevin:cheers:

sounds like you have a binary switch. If you use a trinary switch you get the extra output to turn the fan(s) on whenever the a/c is activated.

parsonsj
07-12-2012, 07:48 PM
If you use a trinary switch you get the extra output to turn the fan(s) on whenever the a/c is activated.I like to use trinary switches for that reason too. Vintage Air sells 'em.

http://www.vintageair.com/2012catalog/2012%20VintageAir%20Catalog%20Final%20WEB%20(Page% 2087).pdf

RdHuggr68
07-12-2012, 08:06 PM
i put a trinary switch in with the intention of adding another fan (pusher) in front of the condensor. I did'nt know I could tie it into my existing fan. Any help would be appreciated.
Thanks, Kevin
:lateral:

parsonsj
07-12-2012, 08:09 PM
Any help would be appreciated.
Follow the link I posted above... it has a wiring diagram and everything. :)

RdHuggr68
07-12-2012, 08:22 PM
Follow the link I posted above... it has a wiring diagram and everything. :)

Thanks John I appreciate your help!!
Kevin :cheers:

Z06vette
07-19-2012, 08:36 PM
Not sure if you had a factory harness reworked, or what computer you have. I'm using a modded factory Fbody harness with factory computer. You can have it tuned to turn the fans on earlier. Also, there is an AC feed that you can hook to the blue wire on the VA harness for the compressor.. This will turn on the fans as soon as AC is turned on. Or use trinary switch as mentioned above.

RdHuggr68
07-20-2012, 09:13 PM
I could be wrong but what if the compressor circuit turns on the fan and when computer sees the engine temp reach 220 degrees and turns on the fan circuit.Isn't that a major problem.........?

camcojb
07-20-2012, 09:16 PM
I could be wrong but what if the compressor circuit turns on the fan and when computer sees the engine temp reach 220 degrees and turns on the fan circuit.Isn't that a major problem.........?

nope. :thumbsup:

GregWeld
07-21-2012, 08:09 AM
I could be wrong but what if the compressor circuit turns on the fan and when computer sees the engine temp reach 220 degrees and turns on the fan circuit.Isn't that a major problem.........?



They both work via shorting (switching) the ground circuit... once it's a circuit it makes no difference which one is causing the switch.

camcojb
07-21-2012, 09:27 AM
I could be wrong but what if the compressor circuit turns on the fan and when computer sees the engine temp reach 220 degrees and turns on the fan circuit.Isn't that a major problem.........?

nope. :thumbsup:

They both work via shorting (switching) the ground circuit... once it's a circuit it makes no difference which one is causing the switch.

thanks Greg, that's a much better explanation than mine. I was in a hurry! :lol:

Stuart Adams
07-21-2012, 01:07 PM
Man I love hanging around smarter people than me. Learn something from u guys daily. :hail:

Fluid Power
07-22-2012, 06:37 AM
They both work via shorting (switching) the ground circuit... once it's a circuit it makes no difference which one is causing the switch.

Great explanation. This was discussed on an earlier thread this month as well. I was having the same issue!

http://www.lateral-g.net/forums/showthread.php4?t=37473

Darren

RdHuggr68
07-29-2012, 07:21 PM
Thanks everybody for all the great advice.
Kevin