sevillaz28
06-28-2012, 07:31 AM
So I've decided to clean out my storage unit and sell most of my parts that have been sitting. Prices are negotiable but not a whole lot. The parts listed are in excellent shape and exactly as described.
I will do my best to keep the ad up to date as parts are sold. I will have another ad coming up soon for a bunch more stuff.
2003 Corvette LS1 with 18,000 miles . Its all there but no front runner system. ECU and pedal included. $3,800
New on the crate Year One LT1 350 400hp engine. Intake to pan. Look it up at Year One, Part Number CT350PC1. $2,200 SOLD I have 2 Big Block Chevy Engines. These are bare blocks. they are 396's that have been fully machined and ready for building. $350 each
I have a Big Block 402 bare block that has just been sitting around and needs to be machined. $175
I have a 68 350 bare block that has been machined and is ready for building. $350
1969 Camaro front seats that have been redone with standard covers. They are in excellent shape. $650
1969 Camaro Front and back seats recovered in black deluxe covers in excellent shape. There are a couple of the buttons missing. $1,000
1969 Camaro Front and Rear standard door panels in excelent shape. They were installed and used for a week. $100 SOLD
1967 to 1969 Camaro Direct Fit Aluminum radiator. Its a Griffen 2 row Hi Flow rate for a 400hp engine. Used for 60 miles. $300
Quick Fuel 750 Double Pumper carb. Used for about 2000 miles. No fuel line. $400
1967 to 1969 Camaro 10 bolt stock rear end. No problems with it at all. Comes complete from drum to drum. $250
1967 to 1969 Camaro 10 bolt Posi rear end. Rebuilt and never installed. 411 gears with an Aubern posi unit. This is a fresh rear end. NO brakes. $900. I also have a set of Baer single piston calipers, brackets and a new set of lines for this rear end and can install them for $500 more bringing the total to $1,400 for a New complete Disk rear end
1966 to 1967 Chevelle factory tilt column rebuilt and in perfect condition. $800
1955 to 1957 Chevy BelAir Idid-it tilt column new and never used. $300 SOLD
Weiand Stealth intake for big block oval port chevy with 30 miles on it so its really clean. $125
Eaton 12 bolt posi unit with about 7000 miles on it with 373 gears and matching pinion gear. $400 Sold
1967 to 1969 Camaro Sub Frame. Blasted and Powder Coated. NO a-arms or steering, just the frame. $450
1967 to 1969 2 SS Hoods. One hood is painted with louvers in excelent shape, $400 and the other is new and was being fitted so it has bondo on it, $250
Budnik Knife Wheels in excelent shape. Made for newer Corvettes 1999 to current. 18x11 in the rear and 18x9.5 in the front with Toyo proxes r1. 295 in rear and 275 in front. 90% tread. $1000
2003 Corvette wheels. These have some curb rash on two of the wheels and could use a good cleaning. Tires are in good shape. $400
So I sold the Idid-it column this morning and at the same time found a NEW in the box Flaming River floor shift tilt paintable column with levers for a 55 Chevy. Its a nicer column and its up for $300
I have other stuff that I will post later. If you want pics of any thing listed, I will get them out as soon as I can but I'm really busy so I will be a little slow with the pics.
Thanks, John 510-867-1797
I will do my best to keep the ad up to date as parts are sold. I will have another ad coming up soon for a bunch more stuff.
2003 Corvette LS1 with 18,000 miles . Its all there but no front runner system. ECU and pedal included. $3,800
New on the crate Year One LT1 350 400hp engine. Intake to pan. Look it up at Year One, Part Number CT350PC1. $2,200 SOLD I have 2 Big Block Chevy Engines. These are bare blocks. they are 396's that have been fully machined and ready for building. $350 each
I have a Big Block 402 bare block that has just been sitting around and needs to be machined. $175
I have a 68 350 bare block that has been machined and is ready for building. $350
1969 Camaro front seats that have been redone with standard covers. They are in excellent shape. $650
1969 Camaro Front and back seats recovered in black deluxe covers in excellent shape. There are a couple of the buttons missing. $1,000
1969 Camaro Front and Rear standard door panels in excelent shape. They were installed and used for a week. $100 SOLD
1967 to 1969 Camaro Direct Fit Aluminum radiator. Its a Griffen 2 row Hi Flow rate for a 400hp engine. Used for 60 miles. $300
Quick Fuel 750 Double Pumper carb. Used for about 2000 miles. No fuel line. $400
1967 to 1969 Camaro 10 bolt stock rear end. No problems with it at all. Comes complete from drum to drum. $250
1967 to 1969 Camaro 10 bolt Posi rear end. Rebuilt and never installed. 411 gears with an Aubern posi unit. This is a fresh rear end. NO brakes. $900. I also have a set of Baer single piston calipers, brackets and a new set of lines for this rear end and can install them for $500 more bringing the total to $1,400 for a New complete Disk rear end
1966 to 1967 Chevelle factory tilt column rebuilt and in perfect condition. $800
1955 to 1957 Chevy BelAir Idid-it tilt column new and never used. $300 SOLD
Weiand Stealth intake for big block oval port chevy with 30 miles on it so its really clean. $125
Eaton 12 bolt posi unit with about 7000 miles on it with 373 gears and matching pinion gear. $400 Sold
1967 to 1969 Camaro Sub Frame. Blasted and Powder Coated. NO a-arms or steering, just the frame. $450
1967 to 1969 2 SS Hoods. One hood is painted with louvers in excelent shape, $400 and the other is new and was being fitted so it has bondo on it, $250
Budnik Knife Wheels in excelent shape. Made for newer Corvettes 1999 to current. 18x11 in the rear and 18x9.5 in the front with Toyo proxes r1. 295 in rear and 275 in front. 90% tread. $1000
2003 Corvette wheels. These have some curb rash on two of the wheels and could use a good cleaning. Tires are in good shape. $400
So I sold the Idid-it column this morning and at the same time found a NEW in the box Flaming River floor shift tilt paintable column with levers for a 55 Chevy. Its a nicer column and its up for $300
I have other stuff that I will post later. If you want pics of any thing listed, I will get them out as soon as I can but I'm really busy so I will be a little slow with the pics.
Thanks, John 510-867-1797