67ragtp
06-24-2012, 07:17 PM
Many of you guys have seen my red 69, I just dont have the room for two cars. The 67 only has 1166 miles since completed in late 08, its very fresh. The car was featured on the cover of Super chevy in feb 08, shortly after that I swapped out all the new Baer track brakes for the wilwoods and the budnik steering wheel got swapped for the more comfortable MOMO. Then started building the 69, the 67 was a full frame off resto, everything is new down to the hardware level. The car drives very nice, while the full sequential fuel injection makes the throttle responce and driveabilty very nice. This thing would be awesome on a long haul power tour. It needs to be driven, Im in Oakland NJ, $42k
Thanks Rich
Build sheet for 67 camaro
Body
complete new old stock front sheetmetal
NOS front fenders
NOS cowl hood
NOS upper valence
NOS lower Valence
NOS drivers door shell
repro floor
Detroit Speed & Engineering mini tub rear wheel houses
paint Debeers - 92 chevy truck 34--- b7-45878 emerald turquoise
all new rear light bezels/ bumper/
Detroit Speed & Engineering front high intensity headlight beams
suspension
Detroit Speed & Engineering rear 3" drop leaf springs
Detroit Speed & Engineering rear upper shock crossmember
Detroit Speed & Engineering rear Koni shocks
Detroit Speed & Engineering offset shackles
Detroit Speed & Engineering front coil over conversion(beadblasted front subframe)
Detroit Speed & Engineering upper and lower control arms
Detroit Speed & Engineering front Koni coil over shocks w/ 600lb springs
Detroit Speed & Engineering steering gear box and all steering linkage
Detroit Speed & Engineering- hotchkis front sway bar
Detroit Speed & Engineering solid body mounts
Detroit Speed & Engineering frame connectors
Wheels
Budnik fontana 17x11 rear BFG KDW 315s
Budnik fontana 17x8.5 front BFG KDW 245s
Gas tank stainless steel, Detroit Speed & Engineering built by Rock valley
Aeromotive A-1000fuel pump
Aeromotive regulator, billet filters 100 micron and 10 micron
All Brown and Miller PTFE crimped convoluted fuel lines front to back
new Moser 12 bolt Rear end housing, 33 spline axles, Big ford ends, 3.73 eaton posi unit, T/A aluminum cover.
new Dennys drive shaft 1350 u joints
New TKO 5 speed transmission/ with a Mcleod DF clutch/ Mcleod safety sfi bell housing
New Bill Mitchell 427 cu in. small block
Wilson Manifold prepared world single plane intake for full sequential fuel injection
FAST XFI engine managment computer
FAST distributor and throttlebody
Hooker supercomps Jet Hot coated
Stainless Works 3 inch 304SS exhaust system
Ron Davis dual pass dual fan with integrated overflow tank
optima red top
AAW classic update harness front to back with FAST fuel injection engine harnesses
Brakes
Wilwood superlites 6 pots(black) front 13"slotted/crossdrilled rotors
Wilwood superlites 4 pots(black) rear 13" slotted.crossdrilled rotors
Hydratech hydroboost hydraulic assist unit
all new brake lines
Interior
corbeau black leather TRS front seats
refinished stock rear seat
complete new interior including new stock headliner/ package tray/ carpet/door panels/hardware, cranks, handles
Wing window pot metal up rights sent out for new chrome and completely rebuilt
metro seals
Momo Jet steering wheel
Tilt column
covans dash guage bezel with autometer ultralite guages
new dash cover
all new green tinted glass from auto city glass
sound deadening FatMat
This was a complete off the frame restoration/modification built car every nut and bolt is new. Hit the major parts, all light bezels are new as well.
http://i168.photobucket.com/albums/u188/ragtp/ASIIMG_2312.jpg
http://i168.photobucket.com/albums/u188/ragtp/DSC_0076.jpg
http://i168.photobucket.com/albums/u188/ragtp/Picture081.jpg
http://i168.photobucket.com/albums/u188/ragtp/DSC_0115.jpg
Thanks Rich
Build sheet for 67 camaro
Body
complete new old stock front sheetmetal
NOS front fenders
NOS cowl hood
NOS upper valence
NOS lower Valence
NOS drivers door shell
repro floor
Detroit Speed & Engineering mini tub rear wheel houses
paint Debeers - 92 chevy truck 34--- b7-45878 emerald turquoise
all new rear light bezels/ bumper/
Detroit Speed & Engineering front high intensity headlight beams
suspension
Detroit Speed & Engineering rear 3" drop leaf springs
Detroit Speed & Engineering rear upper shock crossmember
Detroit Speed & Engineering rear Koni shocks
Detroit Speed & Engineering offset shackles
Detroit Speed & Engineering front coil over conversion(beadblasted front subframe)
Detroit Speed & Engineering upper and lower control arms
Detroit Speed & Engineering front Koni coil over shocks w/ 600lb springs
Detroit Speed & Engineering steering gear box and all steering linkage
Detroit Speed & Engineering- hotchkis front sway bar
Detroit Speed & Engineering solid body mounts
Detroit Speed & Engineering frame connectors
Wheels
Budnik fontana 17x11 rear BFG KDW 315s
Budnik fontana 17x8.5 front BFG KDW 245s
Gas tank stainless steel, Detroit Speed & Engineering built by Rock valley
Aeromotive A-1000fuel pump
Aeromotive regulator, billet filters 100 micron and 10 micron
All Brown and Miller PTFE crimped convoluted fuel lines front to back
new Moser 12 bolt Rear end housing, 33 spline axles, Big ford ends, 3.73 eaton posi unit, T/A aluminum cover.
new Dennys drive shaft 1350 u joints
New TKO 5 speed transmission/ with a Mcleod DF clutch/ Mcleod safety sfi bell housing
New Bill Mitchell 427 cu in. small block
Wilson Manifold prepared world single plane intake for full sequential fuel injection
FAST XFI engine managment computer
FAST distributor and throttlebody
Hooker supercomps Jet Hot coated
Stainless Works 3 inch 304SS exhaust system
Ron Davis dual pass dual fan with integrated overflow tank
optima red top
AAW classic update harness front to back with FAST fuel injection engine harnesses
Brakes
Wilwood superlites 6 pots(black) front 13"slotted/crossdrilled rotors
Wilwood superlites 4 pots(black) rear 13" slotted.crossdrilled rotors
Hydratech hydroboost hydraulic assist unit
all new brake lines
Interior
corbeau black leather TRS front seats
refinished stock rear seat
complete new interior including new stock headliner/ package tray/ carpet/door panels/hardware, cranks, handles
Wing window pot metal up rights sent out for new chrome and completely rebuilt
metro seals
Momo Jet steering wheel
Tilt column
covans dash guage bezel with autometer ultralite guages
new dash cover
all new green tinted glass from auto city glass
sound deadening FatMat
This was a complete off the frame restoration/modification built car every nut and bolt is new. Hit the major parts, all light bezels are new as well.
http://i168.photobucket.com/albums/u188/ragtp/ASIIMG_2312.jpg
http://i168.photobucket.com/albums/u188/ragtp/DSC_0076.jpg
http://i168.photobucket.com/albums/u188/ragtp/Picture081.jpg
http://i168.photobucket.com/albums/u188/ragtp/DSC_0115.jpg