DRJDVM's '69
06-22-2012, 01:54 PM
Im playing around with getting all my driveline angles dialed in and was thinking of making up a mock up driveshaft to help get my working angles perfect. The driveshaft will have some slope to it so figured it makes life easier checking that slope with an actual driveshaft in there..... That way I can easily move my trans angle and pinion and check how it effects the driveshaft angle
I've got a T56 magnum ... From what I've read alot of 27 spline yokes will work
Once I get the angles dialed in I'll do my final driveshaft measurement and drop some $$ on the nice stuff
So if you have a cheap yoke and/or a driveshaft..... And you are in the central CA area or are willing to ship.... Let me know
I've got a T56 magnum ... From what I've read alot of 27 spline yokes will work
Once I get the angles dialed in I'll do my final driveshaft measurement and drop some $$ on the nice stuff
So if you have a cheap yoke and/or a driveshaft..... And you are in the central CA area or are willing to ship.... Let me know