control arm fabricator

[67ragtp]

My brother has prints to build a specific lower and upper control arm for his project, any recomendations on a machine shop who can build/weld them to the drawing specs. Its nothing out of the norm as far as control arms go, just unique to his rear engine/transaxle combo.

Thanks Rich

[intocarss]

Try Brett at [email protected]... 67zo6Camaro is his screen name

[crobin4]

Far from expert advice and I should probably keep my mouth shut but if I were in a similar situation and didn't need to or couldn't have it done locally, I'd call: Schwartz,The Roadster Shop, or Art Morrison. I'm willing to bet if they were unable to help, they will know someone who can.
Best Wishes on your project.

[Proforged]

My brother has prints to build a specific lower and upper control arm for his project, any recomendations on a machine shop who can build/weld them to the drawing specs. Its nothing out of the norm as far as control arms go, just unique to his rear engine/transaxle combo.

Thanks Rich

If you're just looking for custom 4-link bars, check these guys out. I'd recommend calling and asking the lead time on a custom project first, PS:

http://thorbros.com/catalog/4-link-parts/4-link-bars

[67ragtp]

If you're just looking for custom 4-link bars, check these guys out. I'd recommend calling and asking the lead time on a custom project first, PS:

http://thorbros.com/catalog/4-link-parts/4-link-bars

Unfortunately its not that simple, its an IRS set up with triangular uppersand lowers. Thanks Anyway, Rich

[Ron in SoCal]

What's he building? :D

[67ragtp]

What's he building? :D
He's building a lambo replica, he had a chassis shop build him a square tube chassis and provide some plans for other pieces, then using a c4 donor car to canabalize the drivetrain. I really wish he would have built a gm g-machine. This thing is gonna be tough for him to complete.

Thanks again for the help, I passed the info on to him so he's checking it out.