Wheel ideas for the average man

[68vert]

I'm not a Nascar driver with a endless budget to blow. Just an average working man that has been saving his ass off for some tire and wheels for a 1st gen. Mini tubed in the back and a aftermarket subframe in the front. Looking to run 295 and 335 18's. Any ideas on a reasonably priced wheel?

[skatinjay27]

i guess first question would be whats reasonable to you?
running the wide sizes somewhat hinders your cheap options.

[68vert]

i guess first question would be whats reasonable to you?
running the wide sizes somewhat hinders your cheap options.

Is it possible to find a 18x12 with a custom offset for under a G?

[JKnight]

CCW tends to be on the more reasonable end of things when it comes to custom backspacing wheels.

[68vert]

CCW tends to be on the more reasonable end of things when it comes to custom backspacing wheels.

hey thanks. never heard of em till now:thumbsup:

[66SuperSport]

Forgestar has some new wheel designs that tend to look better on late model cars, but can definitely fly old school too. Super reasonable, but they do not have back spacing for really narrow rear ends. Fronts should be no problem though. 18 x 10 are around $350.00.
The Weld Racing wheels we have on our car now are more expensive than the Forgestars, but are substantially less than Forgelines or HREs. Super light weight, strong, and lots of sizes too.

[John510]

18x12 and "reasonable" aren't in the same vocabulary.

Plan on spending at least 4K for a set of wheels and tires

[Flash68]

Sounds like you're spending a lot of $ in other areas (tires, minitubbing, etc) so I would advise against skimping on wheels. They can make or break a car.

That being said, maybe try Team III if you like the old mini lites.

CCW tends to be on the more reasonable end of things when it comes to custom backspacing wheels.

Good call. :thumbsup:

[skatinjay27]

yup ccws are around 700 each for 18x12s.

[Ron in SoCal]

Custom wheels - I know where you can get a set of forged three piece wheels, any design except monoblock in those sizes for $3200 not including tires. PM me if interested...

[68vert]

Plan on spending at least 4K for a set of wheels and tires

I guess reasonable is relative. $4K for wheels and tires that size is reasonable to me.....??

Sounds like you're spending a lot of $ in other areas (tires, minitubbing, etc) so I would advise against skimping on wheels. They can make or break a car.

Yeah I know right? :willy:

So with that said, I appreciate all the help in finding some reasonably priced wheels.

[Flash68]

Well if reasonable to you is $4k then you're in okay shape!

Forgelines can be had for that, and during the Thanksgiving sale every year they are about $3300.

Lots of options around that price. I think Formula 43 are a little over $4k and those look to be an excellent quality built wheel (DSE's new wheel partner of choice).

[68vert]

Well if reasonable to you is $4k then you're in okay shape!

Forgelines can be had for that, and during the Thanksgiving sale every year they are about $3300.

Lots of options around that price. I think Formula 43 are a little over $4k and those look to be an excellent quality built wheel (DSE's new wheel partner of choice).

My fiance's b-day is the day before thanksgiving. She's gonna be soooo excited to get a set of sweet Forgelines! Surprise! New shoooz sweetheart! :woot:

[Formula43 Wheel]

Any of our designs in 18" will be less than $1000.00 per wheel. Our current build time is 3 weeks.
Unlike other wheel companies, we actually manufacture our own parts including the inner and outer rim shells. We do not source them off of the shelf from a warehouse.
Our exclusive spin form technology gives us the advantage of controlling how the rim shells are made in order to optimize strength and performance.
This includes an improved safety bead on the both inner and outer rims to ensure proper seating of the tire and that the tire will stay mounted to the rim in the event of impact or loss of air pressure. Improved rim contour to help ease of tire mounting and bead seating. Added material in specific areas of the rim-half for additional strength and stiffness.
Combined with over 20 years experience in the aftermarket wheel business and fully backed by the team at Detroit Speed Engineering, Formula 43 wheels are going to be the best wheel and best value for your pro touring car.

[68vert]

I like the Rad14 design but would like a black powder coated rim with clear powder coated center finish. Is that possible? Any special pricing events or sales in the near future?

[skatinjay27]

yup 4k is the norm 3 piece high end wheels, what were you worried it was gonna be near 8-10k?

[68vert]

yup 4k is the norm 3 piece high end wheels, what were you worried it was gonna be near 8-10k?

I keep seeing used sets posted for about that price and I was starting to pucker at the thought of 5-6k.

[Hugger67RSSS]

Give true forged a try, they are big in newer Vette and the mustang crowd. He quoted me at 2700 shipped for 3 piece wheels and powder coated centers

[Formula43 Wheel]

68vert,
All of our wheels are built to order so a set of RAD14's with a black powder coated outer and a clear powder coated center is no problem. The outer can be matte or gloss black, the center can be polished and cleared, brushed and cleared or clear anodized. All of which are extremely durable finish options. A custom back space is no problem either. If I can help you with any other questions or would like a quote, send me a pm with your specs and I will get back to you.

[TheJDMan]

The Weld RTS are nice looking 3 piece 18" wheels in the $600 to $700 range depending on width and they are American made.

http://weldracing.com/street-performance/rts-18-inch/18-in-s71-5x4-75.html

[68vert]

Give true forged a try, they are big in newer Vette and the mustang crowd. He quoted me at 2700 shipped for 3 piece wheels and powder coated centers

I must've caught the guy on an off day.......

The Weld RTS are nice looking 3 piece 18" wheels in the $600 to $700 range depending on width and they are American made.

These are definitely a cost effective solution. I'm interested in what Ron has to say. The guys at Schott, Jason Rushforth, Boze, and Formula have been easy to talk to:thumbsup: Well havent really talked to Formula but they have responded to my post. Much appreciated.

[Tomswheels]

Just a couple lower buck ideas, newer Vette Zo6 wheels (either take off or repros) can be found in the 18x11-12 size for $1000 a SET. You may have to spacer to make the offset work. There is a guy selling new American Racing Bullitt style wheels in an 18x10, brand new with a couple different offsets, for $200 a wheel...

[soundqdoug]

Billet Specialties
Centerline
Weld Racing
CCW
American Racing (Custom Series)