chr2002ca
05-09-2012, 04:35 PM
SOLD!!!
Up for sale is a Baer Track front 13” Disc Brake Kit for a ‘67-‘69 Camaro/Firebird. It’s a very popular kit. I only used this kit for 3800 miles and as you can see in the photos it’s almost in new condition. There’s no abnormal wear on the rotors or pads or anything else and I just detailed everything so it’s ready to be installed again. It’s a great setup for someone who needs it. This kit comes with everything that was originally included with it, with the exception of the cast master cylinder which you probably wouldn’t want anyway (I chucked it). For power brakes a 1” to 1 1/8” master cylinder could be used, and for a manual a 13/16” to 7/8” size would do. Master cylinder sizing also depends on what you’re running in the rear, so you should call Baer if you have questions about that. Here’s a write-up about the kit from Baer:
“This is a complete front disc conversion from Baer. The kit includes 13" front rotors - Cross Drilled, gas slotted and Zinc washed for the ultimate in stopping power and looks. 2 piston aluminum calipers with performance pads, stainless steel braided flex hoses (caliper to frame) and a set of hubs that will install on STOCK disc or drum spindles! All hardware and instructions are also included. Will fit some 16" wheels and basically all 17" wheels.”
I used a tiny paint brush to paint the Baer lettering and claw in blue to match my car. The new owner can do the same if they like with their own color. It’s easy if you have a steady hand and some patience.
This kit currently sells for around $1300, probably $1225 without the master cylinder. My price is only $850 and I’m including shipping within the continental US in that price(which is a lot considering the kit weighs 72lbs in the box and shipping won’t be cheap).
I prefer PayPal. I have this posted on other forums. No calling 'dibs' or reserving the right to buy. First person to actually pay an agreed price gets it shipped to them the same day payment is received. Feel free to PM me if you have any questions.
Thanks,
Chris
http://www.69camaroproject.com/SharedImages/ForSale/Baer1.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer2.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer3.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer4.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer5.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer6.JPG
Up for sale is a Baer Track front 13” Disc Brake Kit for a ‘67-‘69 Camaro/Firebird. It’s a very popular kit. I only used this kit for 3800 miles and as you can see in the photos it’s almost in new condition. There’s no abnormal wear on the rotors or pads or anything else and I just detailed everything so it’s ready to be installed again. It’s a great setup for someone who needs it. This kit comes with everything that was originally included with it, with the exception of the cast master cylinder which you probably wouldn’t want anyway (I chucked it). For power brakes a 1” to 1 1/8” master cylinder could be used, and for a manual a 13/16” to 7/8” size would do. Master cylinder sizing also depends on what you’re running in the rear, so you should call Baer if you have questions about that. Here’s a write-up about the kit from Baer:
“This is a complete front disc conversion from Baer. The kit includes 13" front rotors - Cross Drilled, gas slotted and Zinc washed for the ultimate in stopping power and looks. 2 piston aluminum calipers with performance pads, stainless steel braided flex hoses (caliper to frame) and a set of hubs that will install on STOCK disc or drum spindles! All hardware and instructions are also included. Will fit some 16" wheels and basically all 17" wheels.”
I used a tiny paint brush to paint the Baer lettering and claw in blue to match my car. The new owner can do the same if they like with their own color. It’s easy if you have a steady hand and some patience.
This kit currently sells for around $1300, probably $1225 without the master cylinder. My price is only $850 and I’m including shipping within the continental US in that price(which is a lot considering the kit weighs 72lbs in the box and shipping won’t be cheap).
I prefer PayPal. I have this posted on other forums. No calling 'dibs' or reserving the right to buy. First person to actually pay an agreed price gets it shipped to them the same day payment is received. Feel free to PM me if you have any questions.
Thanks,
Chris
http://www.69camaroproject.com/SharedImages/ForSale/Baer1.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer2.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer3.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer4.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer5.JPG
http://www.69camaroproject.com/SharedImages/ForSale/Baer6.JPG