Lokar DBC, LS1 What length will I need.

[orangevert]

Im almost ready for throttle cable, What length did you run? Did you use your factory pedal or did you use a diferent pedal?



Thanks Guys, I strugle to ask stupid questions, But the knowlege o
n here helps me from buying the wrong stuff

Thanks again Kirk

[dhutton]

I used the stock Camaro 6 cylinder pedal. The Lokar cable is cut to fit.

Don

[brownz]

I just installed a lokar cable on my 79 and I did not have to cut it. I think it was a 36in cable. But not sure if you will need a different lenght for a first gen or not? I also used my stock pedal and will be installing the MODO covers.

[brownz]

I just installed a lokar cable on my 79 and I did not have to cut it. I think it was a 36in cable. But not sure if you will need a different lenght for a first gen or not? I also used my stock pedal and will be installing the MODO covers.

I dug up the part number of the lokar cable that I used. Its a TC-1000LS1. It is a 36in cable. I would look on amazon if you dont have one yet, that is the cheapest place that I found it and with free shipping.

[1HTBRRD]

I used the 36 inch lokar cable, stock 69 pedal, and had to trim the housing and cable....but it was very easy and could probably be left alone, I was just a little anal about it.

[orangevert]

I dug up the part number of the lokar cable that I used. Its a TC-1000LS1. It is a 36in cable. I would look on amazon if you dont have one yet, that is the cheapest place that I found it and with free shipping.

Thanks for the info brownz