1967 - 1969 F and X body JRS Apex C6 front suspension

[bdahlg68]

As I contemplate a change in direction for my project, I'm considering selling my JRS front suspension. Everything is brand new. Includes subframe, control arms, spindles, hubs, sway bar and links, steering gear, Bilstien coilovers, and fasteners. Subframe is currently bare steel. Located in metro Detroit and is not palleted currently. Looking to get $4995 + shipping.

https://lh4.googleusercontent.com/-vqx9ADZxqN0/ToeCIiPi18I/AAAAAAAAYDQ/Mb9fm23uJuQ/s800/IMG_6093.JPG

[GRob]

Are the Bilsteins non adjustable, single, double?

Thanks!

[bdahlg68]

Bilstien's are the 6-way single adjustables. Springs are 550 lb/in.

[bdahlg68]

No interest, eh? No waiting!

[boostin05blacks]

I'd love to have it just don't have that kinda cash ATM...:thumbsup:

[bdahlg68]

bump for new price.... $5400

[bdahlg68]

bump for new price.... $5200

[69-nova]

man it sucks being 17. just found out today wen i was pulling the everything off my 69 nova to pull my motor that my frame is tweaked. now my dream subframe is up for sale and i of course cant afford it. :(

[Flash68]

mmmmm.... tasty.....

[bdahlg68]

Happy Bump Day!

[Devil Dog]

man it sucks being 17. just found out today wen i was pulling the everything off my 69 nova to pull my motor that my frame is tweaked. now my dream subframe is up for sale and i of course cant afford it. :(

30 years later... kids college, and bigger bills I still can't afford this either. I feel your pain. :mad:

[bdahlg68]

Bumpily

[Rick D]

So Brain what are you going to use for the sub frame now? Maybe you are interested in some horse tradin??

[bdahlg68]

So Brain what are you going to use for the sub frame now? Maybe you are interested in some horse tradin??

I'm doing something quite different. I could use E90 3 series parts... Lots of them.

[bdahlg68]

Ttt..

[bdahlg68]

$5100 picked up // $5500 shipped in the 48. (Non-residential / non-liftgate or Nearest terminal).

[65_LS1_T56]

I'll take it if it fits a Chevelle... :rofl:


free bump ;)

[coolwelder62]

I'll take it if it fits a Chevelle... :rofl:


free bump ;)All it take's to fit in chevelle is a saws-all,welder,Wife's dinning room table for a welding jig,Some Forthought.Snap and your Done.:willy: :willy:

[65_LS1_T56]

All it take's to fit in chevelle is a saws-all,welder,Wife's dinning room table for a welding jig,Some Forthought.Snap and your Done.:willy: :willy:

Haha, Scott don't think that "clipping" a full frame hasn't crossed my mind..I have lot's of crazy ideas.
Brian's frame is pretty sweet, someone here needs this so he can proceed with his revised plan. It'll be pretty unique for sure.

[bdahlg68]

:lateral:

[bill amsley]

Is the sub frame set up for a ls eng, how much to shipped to pa .? Bill

[bdahlg68]

Is the sub frame set up for a ls eng, how much to shipped to pa .? Bill

It comes with LS adapter plates. I can provide pics as needed. Send me a zip and I will figure out shipping.

[p51mus]

Has anyone ever put a big block chevy in these frames?

[bdahlg68]

Has anyone ever put a big block chevy in these frames?

Not sure, but pretty sure it's an option.

[coolwelder62]

Has anyone ever put a big block chevy in these frames?Albert Melcior has put a bigblock pont. in a 2gen firebird.using one of these sub frames.

[bdahlg68]

ttt again

[coolwelder62]

This is a very well built sub frame.If you are wanting a sub for C5/C-6 corvette componets this unit works great.:thumbsup:

[bdahlg68]

After Labor Day bump!

[bdahlg68]

bumpity bump bump bump......

[slownova]

Trade for a 408 ls short block?

[jeremy30thz]

Somebody will get a great deal, good luck with the sale

[65_LS1_T56]

Trade for a 408 ls short block?

To most, that would sound attractive...however, that would have 2 cylinders too many for Brian :_paranoid

[bdahlg68]

To most, that would sound attractive...however, that would have 2 cylinders too many for Brian :_paranoid

Would be good for the G8, but for the Firebird those LS motors are "longitudinally challenged" :unibrow:

[bdahlg68]

Bump for an early black friday sale - $4995 + shipping.

[MoparCar]

What is the hub to hub track width and outside to outside frame rail width on the sub?

Thanks-

[bdahlg68]

What is the hub to hub track width and outside to outside frame rail width on the sub?

Thanks-

61.5" with no rotors according to Jake. Is there a particular area where you want the width across frame rails or several spots front to rear? I suspect it will be around 36".

[MoparCar]

Frame to frame at the suspension.

[bdahlg68]

Outside to outside is about 33 3/8"
Inside to inside is about 29 3/8"

[MoparCar]

Thanks, I'll measure a few things since I wouldn't be using it for a standard bolt in GM application.

[bdahlg68]

bump-o

[65_LS1_T56]

bump-o -rama?

come on guys, this is a steal! Brian needs the room in his garage, BMW parts are stacking up!

[bdahlg68]

Bump.....

compare to
$6400 for a Scott Mock setup
$6700 for Art Morrison
$7000 for DSE

Proven setup... with even a qualification at OUSCI last year.

[bdahlg68]

Sold!

[coolwelder62]

Sold!Congrats on the sale.:thumbsup: