Who else has pre-ordered the Kiesler SS700?

[badmatt]

Just wondering who else has pre-ordered the new SS700?

What Sold me is other than a well built and opted transmission was the fact that I called on a Saturday afternoon at 4pm and they were there, Shafi and Dave both answered all my questions, Now thats customer service.

Thank's to Shafi, and Dave. Looking forward to this unit! :D

Matt

[Richio1]

When is the ETA?

[badmatt]

The ship date on my order is for august 17th.

[andrewb70]

The ship date on my order is for august 17th.

What year?

Andrew

[Flash68]

What year?

Andrew

:lol: Exactly...

[66SuperSport]

People are still waiting for RS600s! RS700s now. Really ???

[Vegas69]

I called in on the SS700 as well. Using a standard bellhousing is very attractive. However, from what I was told it still needs the R&D phase. My biggest concern is it's a NEW design. Even though it means cutting my tunnel and more money, I'm headed into the t56 family.

[andrewb70]

....My biggest concern is it's a NEW design.....

I actually don't think that will be an issue. As far as I understand it, the SS700 is more of an evolution than a revolutionary design. Both the RS600 and the SS700 are roughly based on the T45, which essentially was a 5 speed version of the T56, and had many interchangeable parts.

Andrew

[Sieg]

People are still waiting for RS600s! RS700s now. Really ???

Unbelievable isn't it.

[badmatt]

:_paranoid

now you guys are making me worry...

[Vegas69]

I actually don't think that will be an issue. As far as I understand it, the SS700 is more of an evolution than a revolutionary design. Both the RS600 and the SS700 are roughly based on the T45, which essentially was a 5 speed version of the T56, and had many interchangeable parts.

Andrew

You could be right but this thing has to stand up to 700 ftlbs with my abuse. :lol:

[moparnut]

:_paranoid

now you guys are making me worry...

You should be! I want to know if ANYONE on this board has a RS600 in their hands, or know someone who does?? Please post here!

[FETorino]

You should be! I want to know if ANYONE on this board has a RS600 in their hands, or know someone who does?? Please post here!

I have one. It's strapped to the back of my unicorn.

[badmatt]

Ok now... im going to pull the order...

Anybody have any other suggestions OTHER than a T56 magnum..

I need standard Muncie patern...

[Vegas69]

If you figure it out, let me know.

[Track Junky]

Go to 5speed.com and send Paul an e-mail. He builds road racing transmissions with and without dog ring. Not sure if he is still building the T 56's but he may have something for you.

[Flash68]

Ok now... im going to pull the order...

Anybody have any other suggestions OTHER than a T56 magnum..

I need standard Muncie patern...

Tex Racing/GForce T101A.... cheap and bulletproof and fits Muncie bellhousing. :thumbsup:

[Vegas69]

http://www.gforcetransmissions.com/tran_gt-5.asp

Could be a good option depending on your power level. It's rated at 600hp/500 ftlbs.

[Flash68]

http://www.gforcetransmissions.com/tran_gt-5.asp

Could be a good option depending on your power level. It's rated at 600hp/500 ftlbs.

I saw that too but damn those gear splits are even worse than the TKO!

[Vegas69]

Helical Synchronized Ratios
2.95 2.42
1.94 1.53
1.34 1.23
1.00 1.00
.59, .63, .75, or .90 .59, .63, .75, .79 or .90

Looks pretty decent to me.

[Flash68]

Helical Synchronized Ratios
2.95 2.42
1.94 1.53
1.34 1.23
1.00 1.00
.59, .63, .75, or .90 .59, .63, .75, .79 or .90

Looks pretty decent to me.

That second column is excellent IMO -- didn't see that... only saw this:

Our Street 5-Speed kits are currently available with the preferred 2.94, 1.94, 1.34, 1.00 ratios in gears 1 thru 4.

:thumbsup:

[Vegas69]

I think I'll call them and see if they can beef it up a little more for somebody I know.:unibrow:

[Flash68]

I think I'll call them and see if they can beef it up a little more for somebody I know.:unibrow:

Dude... that would be killer with your motor.... just don't order the same one that Hobaugh had... :_paranoid

[Vegas69]

Yep, it would work really well. I just doubt it would last. I did a little research and it sounds like it will be noisy in this configuration as well. I'll call to humor myself on Monday.

[badmatt]

I need to find something soon... My SB2 is itchin to be put in.. and beat on.

I was looking at a Tex T101A but the shift linkage kills me for clearance...

[Flash68]

I need to find something soon... My SB2 is itchin to be put in.. and beat on.

I was looking at a Tex T101A but the shift linkage kills me for clearance...

Matt, what are the details on your car and motor? I almost went with SB2 stuff myself... curious to see what you're doing.

The linkage room needed for my car wasn't that bad really.

[badmatt]

Matt, what are the details on your car and motor? I almost went with SB2 stuff myself... curious to see what you're doing.

The linkage room needed for my car wasn't that bad really.

Truck is a 97 Sonoma that has been de-airbagged now rides on coil overs all around with a 3 link. ill be reposting a build thread soon.

motor is a strait RCR built motor one of D. Laurences pet motors. made roughly 830 hp. winds to 9800rpm i can post up a pic if you like?

how far does the linkage protrude from the side of the trans?

[Flash68]

Truck is a 97 Sonoma that has been de-airbagged now rides on coil overs all around with a 3 link. ill be reposting a build thread soon.

motor is a strait RCR built motor one of D. Laurences pet motors. made roughly 830 hp. winds to 9800rpm i can post up a pic if you like?

how far does the linkage protrude from the side of the trans?

It's your thread dude so go for it. :thumbsup:

I would def be putting a bulletproof trans behind that motor if it were me. Sounds like you are not detuning the motor at all.

What are your plans for this truck? Much street driving planned?

http://i236.photobucket.com/albums/ff245/flash68/DSCF3505.jpg

http://i236.photobucket.com/albums/ff245/flash68/DSCF3504.jpg

[badmatt]

It's your thread dude so go for it. :thumbsup:

I would def be putting a bulletproof trans behind that motor if it were me. Sounds like you are not detuning the motor at all.

What are your plans for this truck? Much street driving planned?

Looks like I can make a T101A work.. *hits ebay*

mostly street....:unibrow:

some track/auto X

pic of it all together before I pulled it apart for inspection and a new pair of lifters.

http://img.photobucket.com/albums/v342/badmatt/P1011082.jpg

Bell housing and clutch.
http://img.photobucket.com/albums/v342/badmatt/IMG_2060.jpg

BTW your Camaro is awesome!

[badmatt]

What about a faceplated TKO600 from Liberty? with the the road race gear set?

Matt.

[Flash68]

Thanks dude.

I'm not sure that thing will be fun on the street unless you detune it a bit... is it a 358? That won't make crap for power until 6k rpm.

True story: Jmmie Johnson had an SB2 put in his street 1st gen and hated it immediately.... was undrivable on the street.... so he had an LS9 put in.

If it was me I'd at least stroke it to get over 400 cubes (those Sb2 heads have MASSIVE intake ports) and that assumes you have a 358.

Whatever you do, I love it! :thumbsup:

Check craigslist too for the T101. I got mine rebuilt with many fresh parts for $1800.

[badmatt]

Thanks dude.

I'm not sure that thing will be fun on the street unless you detune it a bit... is it a 358? That won't make crap for power until 6k rpm.

True story: Jmmie Johnson had an SB2 put in his street 1st gen and hated it immediately.... was undrivable on the street.... so he had an LS9 put in.

If it was me I'd at least stroke it to get over 400 cubes (those Sb2 heads have MASSIVE intake ports) and that assumes you have a 358.

Whatever you do, I love it! :thumbsup:

Check craigslist too for the T101. I got mine rebuilt with many fresh parts for $1800.

Yes its a 358, the dyno sheets Danny supplied me with shows it starts to make power at 3300 and up. We'll have to see how it eats first.

and when i mean street use I don't mean daily driver.. :D

[Flash68]

What about a faceplated TKO600 from Liberty? with the the road race gear set?

Matt.

Yeah I guess it's an option but I'd rather use a T101 or Jerico with that motor. Proven combos.

Yes its a 358, the dyno sheets Danny supplied me with shows it starts to make power at 3300 and up. We'll have to see how it eats first.

Really? If you can post the dyno, I'd love to see it.

[badmatt]

Yeah I guess it's an option but I'd rather use a T101 or Jerico with that motor. Proven combos.



Really? If you can post the dyno, I'd love to see it.

PM me your email and ill send it out on monday when im at work I dont have a scanner :faint:

I just came across a T101 on RJ for a good price so im going to look into it a bit more.

thanks for the help!

[Vegas69]

If you are turning 9800 rpm, you don't have many choices.

[badmatt]

If you are turning 9800 rpm, you don't have many choices.

Might never see that, I don't think I have the nuts to try it LOL... but 8500 is a different story

[badmatt]

Well im happy I dodged the kiesler bullet...

Thanks guy!

Just picked up an MVE NC 500! (T101A just bit of differences)

thanks to Dave for the help and everybody else who warned me!

Matt

[Flash68]

Very cool. I think it's a better matched trans for your engine.

What are the gear ratios?

Racing Junk or ebay I assume?

[Sieg]

Good deal Matt, best of luck going forward. :thumbsup:

[badmatt]

Dave: Ebay
1st 2.88
2nd 1.75
3rd 1.35
4th 1:1

should work well with either the 3.89's or even 4.10's (leaning on 4.10's for awesome 80mph rolling burn outs)

Matt

[Flash68]

Dave: Ebay
1st 2.88
2nd 1.75
3rd 1.35
4th 1:1

should work well with either the 3.89's or even 4.10's (leaning on 4.10's for awesome 80mph rolling burn outs)

Matt

Post or email that dyno. Then I will have an opinion on gear ratios. :lol:

[badmatt]

It arrived! All 72lbs of it!

http://img.photobucket.com/albums/v342/badmatt/IMG_2069.jpg
http://img.photobucket.com/albums/v342/badmatt/IMG_2068.jpg

Just need to clean the mag and hit it with dichromate and make it look purty. Im going to change the splined piece for the shifter...

Matt

[FETorino]

It arrived! All 72lbs of it!

http://img.photobucket.com/albums/v342/badmatt/IMG_2069.jpg
http://img.photobucket.com/albums/v342/badmatt/IMG_2068.jpg

Just need to clean the mag and hit it with dichromate and make it look purty. Im going to change the splined piece for the shifter...

Matt

That's some real race stuff. No problem shifting that at high rpm :unibrow:

Do you have to wear a helmet to drown out the transmission whine with one of those ? :D

[badmatt]

That's some real race stuff. No problem shifting that at high rpm :unibrow:

Do you have to wear a helmet to drown out the transmission whine with one of those ? :D

Why, that would take away all the fun driving it!

:D

[Flash68]

Killer trans man. :thumbsup:

That's some real race stuff. No problem shifting that at high rpm :unibrow:

Do you have to wear a helmet to drown out the transmission whine with one of those ? :D

The noise my Tex trans makes is one my favorites sounds emanating from my car. I call it a 2nd place compared to the zing that Mike Maier's C&R tranny makes... now that thing sounds wicked.

It's a great match for that SB2 motor Matt. :cheers:

[FETorino]

Why, that would take away all the fun driving it!

:D



Killer trans man. :thumbsup:



The noise my Tex trans makes is one my favorites sounds emanating from my car. I call it a 2nd place compared to the zing that Mike Maier's C&R tranny makes... now that thing sounds wicked.

It's a great match for that SB2 motor Matt. :cheers:

I feel like a chick buying a quiet trans like a T56 :_paranoid I'll blame the quest for comfort on my wife. :D

[Flash68]

I feel like a chick buying a quiet trans like a T56 :_paranoid I'll blame the quest for comfort on my wife. :D

I think Liberty can face plate that and add dog rings. :unibrow:

[Vegas69]

May as well order a Hans devide while you're at it. :lol:

[badmatt]

May as well order a Hans devide while you're at it. :lol:

Its on the list! im gonna buy an old jet fighter helmet paint it sating black gold leaf the living shiz outta it and drive around with it on!

Matt.

[badmatt]

freshly dichromated... Like a bauss.

Still needs to dry a little, have to wipe it down with a damp rag after so its a bit damp. We do this on aerospace parts at our shop all the time. air worthy you guys think?

http://img.photobucket.com/albums/v342/badmatt/IMG_2074.jpg
http://img.photobucket.com/albums/v342/badmatt/IMG_2075.jpg

sorry for the "shop" area in the background.

Matt

[Flash68]

Looks killer dude. It's gonna sound even better I bet. :thumbsup: